Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Materials Engineering》 2012-06
Add to Favorite Get Latest Update

Investigation on Deformation Behavior of a New Type Al-Zn-Mg-Cu-Zr Alloy

WANG Sheng-qiang,WANG Shao-hua,MA Zhi-feng, WANG Qiang,WANG Jian-guo,LU Zheng(Beijing Institute of Aeronautical Materials,Beijing 100095,China)  
Deformation behavior of a new Al-Zn-Mg-Cu-Zr alloy is investigated by dynamic upsetting compress test.The results show that,when the deformation temperature of Al-Zn-Mg-Cu-Zr alloy is below 350℃,there is dynamic precipitation behavior during deformation because of low temperature.Further deformation of the alloy will be difficult due to small precipitates in the alloy.When the deformation temperature is above 400℃,there is no dynamic precipitation behavior in the alloy.When the deformation temperature is higher than 450℃,there is dynamic recrystallization and size increase of grain.The results of dynamic upsetting test show that the appropriate forging temperature of Al-Zn-Mg-Cu-Zr alloy is range of 400-420℃,and the maximum deformation is 60%.
【CateGory Index】: TG146.2
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 4 Hits
1 Liang-ming Yan,Jian Shen,Jun-peng Li,Zhou-bing Li,and Xiao-dong Yan General Research Institute for Nonferrous Metals,Beijing 100088,China;Deformation behavior and microstructure of an Al-Zn-Mg-Cu-Zr alloy during hot deformation[J];矿物冶金与材料学报(英文版);2010-01
2 Li Hai, Zheng Ziqiao, Wang Zhixiu (Central South University, Changsha 410083, China);Influence of Heat Treatment Regime on Microstructures and Fracture Characteristics of 7055 Al Alloy Containing Ag[J];Rare Metal Materials and Engineering;2005-04
3 Wang Shaohua1,Zhang Xingguo1,Yang Shoujie2,Fang Canfeng1,Hao Hai1,Dai Shenglong2(1.Dalian University of Technology,Dalian 116024,China)(2.Beijing Institute of Aeronautical Materials,Beijing 100095,China);Influence of Aging Treatment Regime on Fracture Behavior of Al-7.1Zn-1.1Mg-1.6Cu-0.14Zr Alloy[J];Rare Metal Materials and Engineering;2011-03
4 HAN Xiao-lei,XIONG Bai-qing,ZHANG Yong-an,LI Zhi-hui,ZHU Bao-hong,WANG Feng,LIU Hong-wei(State Key Laboratory of Nonferrous Metals and Processes,General Research Institute for Nonferrous Metals,Beijing 100088,China);Effect of solution treatment on microstructures and mechanical properties of 7150 aluminum alloy[J];The Chinese Journal of Nonferrous Metals;2010-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHAO Ya-dong,HAO An-lin(Department of Mechanical Engineering,Anyang Institute of Technology,Anyang 455000,China);Teaching Exploration of Metal Plastic Forming Theory[J];Journal of Anyang Institute of Technology;2011-04
2 CHU Liang, LU Xian - feng, ZHANG Chao - ge (School of Mechanical & Electrical Engineering, Nanchang University, Nanchang Jiangxi 330029, China);The calculation and precision comparison of necking deformation pressure[J];Ordnance Material Science and Engineering;2004-05
3 WANG Jiayou1,TONG Zheng1,2,SHI Xinglong1,2 ,WANG Huhe1,2 (1.College of the Material Science and Engineering,Inner Mongolia University of Technology,Hohhot 010051,China; 2.Research Institute of Blasting Engineering of the Inner Mongolia University of Technology,Hohhot 010051,China);Explosive forming simulation of beam blank continuous casting mold[J];Ordnance Material Science and Engineering;2011-04
4 CHEN Lin,SU Guang (Material Science and Engineering School,UST Inner Mongolia,Baotou 014010,China);Finite element analysis for effect of the size of the butterfly hole to the metal deformation during the Z-type steel rolling[J];Journal of Baotou University of Iron and Steel Technology;2004-01
5 Yu Ting Gu Li Qiang (School of Mechanical and Dynamical Engineering, Shanghai Jiao Tong University, Shanghai, 200030);Digital Simulation for the Forging Process of Bearing Ring[J];;2004-04
6 CHEN Ying-ying,FENG Wen-jie(Chongqing Institute of Automobile,Chongqing Institute of Technology,Chongqing 400050,China);FEM Analysis on Cold Extrusion Process of Spline Shaft of Motorcycle Engine[J];Journal of Chongqing Institute of Technology(Natural Science Edition);2007-10
7 FENG Wen-jie,HU Ling-shan,CHEN Ying-ying(Chongqing Institute of Technology,Chongqing Automobile Institute,Chongqing 400050,China);Analysis on Upsetting Collapse in Spline Shaft Cold Extrusion Forming[J];Journal of Chongqing Institute of Technology(Natural Science);2009-03
8 ZHANG Suoquan, WANG Lingyun, HUANG Guangsheng, HUANG Guangjie (College of Material Science and Engineering, Chongqing University, Chongqing 400044);Study on Hot Deformation of LD7 Aluminum Alloy[J];Materials Review;2006-05
9 ZHANG Chi1,ZENG Wei-dong1,LI Xing-wu2,SHA Ai-xue2 (1 School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China;2 Beijing Institute of Aeronautical Materials,Beijing 100095,China);Effect of Extrusion Parameters on Cold Extrusion Process of TC16 Titanium Alloy Fastener[J];Journal of Materials Engineering;2008-08
10 YIN De-liang, ZHANG Kai-feng, WU De-zhong (School of Material Science and Technology, Harbin Institute of Technology, Harbin 150001,China,);Nonisothermal deep drawability of AZ31 magnesium alloy[J];Material Science and Technology;2004-01
China Proceedings of conference Full-text Database 6 Hits
1 PENG Yun-cheng,LIU Jin-hai,LI Guo-lu,JIN Hui-jin (School of Materials Science and Engineering,Hebei University of Technology,Tianjin 300132,China);Stress Field Simulation of Grinding Ball in Falling Sphere Test[A];[C];2011
2 Quan LI1,Jian PENG1,2,3,Xianquan JIANG1,Fusheng PAN1,2,3 1 Chongqing Academy of Science and Technology,Chongqing,China,401123 2 College of Materials Sci.and Eng.,Chongqing University,Chongqing,China,400044 3 National Engineering Research Center for Magnesium Alloys,Chongqing,China,400044;Effects of Second Extrusion Deformation on Microstructure and Mechanical Properties of ZM21 Magnesium Alloy[A];[C];2011
3 Wang Xingwu Yan Hongkai (Steel Rolling Project Department of Capital Engineering & Research Incorporation Ltd.,Beijing,100176);Tension Forming Principle and Design Calculation of Great Tension Unit with Five Rollers[A];[C];2009
4 ;Precision forging for middle and high silicon aluminum alloy parts[A];[C];2008
5 LIU Zhiyun YANG Guotai HUANG Juhua YANG Xuechun Nanchang University,Nanchang 330029 China;The stress-strain analysis of narrow strips in plastic bending[A];[C];2004
6 CHU Liang LU Xianfeng ZHANG Chaoge (School of Mechanical & Electrical Engineering NanChang University Nanchang 330029);A Study on bend influence for deformation pressure of Necking with Cone-shaped die[A];[C];2004
【Co-references】
Chinese Journal Full-text Database 3 Hits
1 LIU Xiaotao CUI Jianzhong (The Key Laboratory of Electromagnetic Processing of Materials,Ministry of Education,Northeastern University,Shenyang 110004);Progress in Research on Ultra High Strength Al-Zn-Mg-Cu Alloy[J];Materials Review;2005-03
2 WANG Shao-qing,YU Hua-shun,ZHANG Zhen-ya,WANG Hai-tao,MIN Guanghui(Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials(Ministry of Education),Shandong University,Jinan 250061,China);Heat treatment process of Al-Zn-Mg-Cu alloy fabricated by powder hot extrusion technology[J];Transactions of Materials and Heat Treatment;2009-06
3 NI Pei-xiang~1,ZUO Xiu-rong~1,WU Xin-feng~2(1.Zhengzhou University School of Physical Science & Technology Key Laboratory of Material Physics Ministry of Education, Zhengzhou 450052,China;2.Northeast Light Alloy Co.,Ltd., Harbin 150060, China);Present research status of Al-Zn-Mg alloy series[J];Light Alloy Fabrication Technology;2007-01
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Jiantao Liu1), Guoquan Liu1), Benfu Hu1), Yuepeng Song1), Ziran Qin1), and Yiwen Zhang2) 1) Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China 2) High Temperature Material Institute, Central Iron & Steel Research Institute, Beijing 100081, China;Hot deformation behavior of FGH96 superalloys[J];北京科技大学学报(英文版);2006-04
2 Zhihui Li, Baiqing Xiong, Yongan Zhang, Baohong Zhu, Feng Wang, and Hongwei Liu State Key Laboratory for Fabrication and Processing of Non-ferrous Metals, General Research Institute for Non-ferrous Metals, Beijing 100088, China;Ageing behavior of an Al-Zn-Mg-Cu alloy pre-stretched thick plate[J];北京科技大学学报(英文版);2007-03
3 Qingjun Chen~(1,2)) Yonglin Kang~(1)) Hao Yu~(1)) Chunmei Wang~(2)) Chengxiang Li~(2)) 1)School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China 2)Jinan Iron and Steel Co.Ltd.,Jinan 250101,China;Research on microstructural evolution and dynamic recrystailization behavior of JB800 bainitic steel by FEM[J];北京科技大学学报(英文版);2008-03
4 Song RenguoCenter of Materials Physics and Chemistry Research,College of Science, Beijing University of Aeronautics & Astronautics,Beijing 100083;Current Status and Trends in High Strength Aluminum Alloy Research[J];Materials Review;2000-01
5 Li Hai, Zheng Ziqiao, Wang Zhixiu (Central South University, Changsha 410083, China);Influence of Heat Treatment Regime on Microstructures and Fracture Characteristics of 7055 Al Alloy Containing Ag[J];Rare Metal Materials and Engineering;2005-04
6 LIU Sheng-dan,ZHANG Xin-ming,HUANG Zhen-bao,DU Yu-xuan,ZHOU Zhuo-ping(School of Materials Science and Engineering,Central South University,Changsha 410083,China);Effects of solution heat treatment on microstructure in a high-purity 7055 aluminum alloy[J];Transactions of Materials and Heat Treatment;2006-03
7 HUANG Zhen-bao,ZHANG Xin-ming,LIU Sheng-dan,LIU Wen-hui,ZHANG Chong,GAO Hui(School of Materials Science and Engineering,Central South University,Changsha 410083,China);Effect of solution treatment on microstructure and mechanical properties of 7A55 aluminum alloy[J];Transactions of Materials and Heat Treatment;2007-01
8 Song Renguo; Zhang Baojin; Zeng Meiguang( Northeastern University)Jiao Huisheng(Beijing Aeronautical Material institute);Investigation of Stress Corrosion Susceptibility for 7175 Aluminiun Alloy Double Peak Aged[J];TRANSACTIONS OF METAL HEAT TREATMENT;1996-02
9 HUA Mingjian Institute of Aeronoutical Materials,Beijing,Post Box NO.81;LI Chunzhi;WANG Hongjian Institute of Aeronautical Materials, Beijing;EFFECT OF MICROSTRUCTURES ON THE YIELD STRENGTH AND SCR OF 7075 ALUMINIUM ALLOY[J];Acta Metallrugica Sinica;1988-01
10 LI Jie~1,YIN Zhi-min~1,WANG Tao~(1,2),LI Nian-kui~2(1.School of Material Science and Engineering, Central South University, Changsha 410083, China;2.Northeast Light Alloy Co.Ltd., Harbin 150060, China);The Effect of Solution and Single-Aging Treatment on Mechanical and Electrical Properties of 7055 Aluminum Alloy[J];Light Alloy Fabrication Technology;2004-11
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved