Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials Science and Technology》 2008-04
Add to Favorite Get Latest Update

Development of the research on splitting spinning

HUANG Liang,YANG He,ZHAN Mei(State Key Laboratory of Solidification Processing,School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China)  
Splitting spinning is one typically green and flexible forming technology.Due to its advantages of high quality,high precision,high efficiency and low cost,it can be widely applied in fields of aerospace,automobile,train,ship,energy,etc.This paper reviews the domestic and international state of splitting spinning,analyzes its forming characteristics and summarizes the potential failure modes.Furthermore,it points out the bottle-neck problems of splitting spinning,then discusses and prospects the key technologies in FE modeling.
【Fund】: 国家自然科学基金资助项目(50405039 50575186);; 国家杰出青年科学基金资助项目(50225518);; 国家“863”计划资助项目(2008AA04Z122)
【CateGory Index】: TG376
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 10 Hits
1 KANG Da-chang,LI Mao-sheng,CHEN Yu(School of Material Science and Engi neering,Harbin Institute of Technology,Harbin150001,China);A study of force and power in ball spinning[J];Material Science and Technology;2002-02
2 XUE Ke-min, JIANG Shu-yong, KANG Da-chang (School of Materials Science and Engineering , Harbin Institute of Technology Harbin, 15001 China);Power spinning deformation of thin-walled cylinders with longitudinal inner ribs[J];Material Science and Technology;2002-03
3 CHEN Yu~1,KANG Da-chang~1,JIN Xiao-ou~2(1.School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China,2.School of Architectural Engineering,Heilongjiang University,Harbin 150086,China);FEM coupled thermal simulation of warm shear spinning of cone workpiece of titanium alloy[J];Materials Science and Technology;2006-01
4 ZHANG Jin-hui,ZHAN Mei,YANG He,XU Yin-li,MA Fei(College of Materials Science & Engineering,Northwestern Polytechnical University,Xi'an 710072,China);Influence of process parameters on spinning force and wall thickness difference of shear spinning[J];Materials Science and Technology;2007-02
5 XU Yin-li,ZHAN Mei,YANG He,ZHANG Jin-hui,MA Fei(College of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072,China);Springback law analysis of cone spinning using 3D FEM[J];Materials Science and Technology;2008-02
6 GAO Xi cheng, CHEN Yu, KANG Da chang (School of Material Science and Engineering, Harbin Institute of Technology, Harbin 150001, China);Static FEM analysis of spinning of cone without mandrel[J];Journal of Harbin Institute of Technology;2003-02
7 HAN Zhi-ren,TAO Hua,LIU Li-ming (Northwestern Polytechnical University,Xi'an 710072);Numerical Simulation of Tube Interior Spinning[J];Mechanical Science and Technology;2004-01
8 LI Heng, YANG He, ZHAN Mei, LIN Yan, GU Rui jie (College of Materials Science and Engineering, Northwestern Polytechnical University, Xi′an 710072);A Review of the Research on Wrinkling in Thin-Walled Parts Plastic Forming Processes[J];Mechanical Science and Technology;2004-07
9 ZHAO Xian\|ming\ WU Di (Northeastern University, 110006) LU Yan\ XUE Ke\|min (Harbin Institute of Technology,150001);FEM ANALYSIS OF SPINNING PRESSURE AND NODE DISPLACEMENT DISTRIBUTION FOR FORWARD TUBE FLOW FORMING[J];Journal of Plasticity Engineering;2000-04
10 Zhou Zhaoyao; Lu Yan ;Zhao Xianming; Xue Kemin; Wang Huimbin(Harbin Institute of Technology 150006);Finite Element Analysis of Cylindrical Parts at Forced Spinning[J];JOURNAL OF PLASTICITY ENGINEERING;1994-01
Chinese Journal Full-text Database 10 Hits
1 Li Zhen - hua (The computer department of Anshun occupatign technology college,Anshun561000,Guizhou,China);Discussing Teaching method in the course of Data Structure[J];Journal of Anshun Teachers College;2005-03
2 Qi Shuxia (Shandong Institute of Political Science and Law Ji'nan 250014);A Discussion on the Practical Teaching in Programming Course[J];Office Informatization;2008-10
3 BI Chongwu,HE Yong,LIU Xuefeng,XIE Jianxin School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;Thermo-mechanical coupling analysis in the dieless drawing process of NiTi shape memory alloy wires[J];Journal of University of Science and Technology Beijing;2008-11
4 JIN Xin,ZHANG Guo-zhi,ZHANG Zhi-jing,XIAO Mu-zheng(School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Integral Simulation Platform of Microminiature Clock Mechanical Systems Based on Manufacturing Characteristics[J];Transactions of Beijing Institute of Technology;2007-12
5 Shi Lijuan Cui Weicheng;On the quality control in finite element analysis of ship structure strength[J];Ship & Boat;2002-05
6 ZHANG Ping1,ZHENG Dong-jian2,ZHANG Xian-fa2(1.College of Water Conservancy and Hydropower Eng.,Hohai Univ.,Nanjing 210098,China;2.Jiandu Water Conservancy Bureau of Lishui City,Lishui 323000,China);Finite Element Model of Complex Geologic Engineering Based on HyperMesh Software[J];Journal of Yangtze River Scientific Research Institute;2008-02
7 WU Xiao-qing,LI Jia-lu,CHEN Zu-pan(Key Laboratory for Advanced Textile Composite of Ministry of Education,Tianjin Polytechnic University,Tianjin 300160,China);Influence of Finite Element Mesh on Mold-filling Simulation in RTM[J];Journal of Materials Engineering;2007-05
8 XU Wen-chen, SHAN De-bin, LU Yan,LI Chun-feng (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China,);Research on the multi-pass shear spinning technology of small-angle conical workpieces[J];Material Science and Technology;2004-01
9 LI Mao-sheng~1, KANG Da-chang~2, ZHANG Shi-hong~3, YAN Yong-nian~1 (1. Department of Mechanical Engineering, Tsinghua University, Beijing 100084,China;2. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China;3. Research Institute of Metal, CAS, Shenyang 110016,China);Research on contacting pressure in ball-spinning[J];Material Science and Technology;2004-02
10 LU Hong-jun~1,YAO Cao-gen~1, ZHANG Kai-feng~2, JIA Xin-chao~1, LU Yan~1(1. Aerospace Research Institute of Materials and Processing Technology, Beijing 100076, China, 2. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China);A finite element analysis on the superplastic forming of a GH4169 fuel manifold and a study on pre-forming[J];Material Science and Technology;2004-04
China Proceedings of conference Full-text Database 8 Hits
1 Liu Li, Zhang Ziming, Shi Yuanzheng, Ji Meng, Wang Hong, Guo Jianxin(School of Electronic Information & Control Engineering, Beijing University of Technology, BeiJing 100022, China);Design of electronic boxing system on exercise & entertainment base on S3C2410[A];[C];2007
2 WANG Qun, HE Yi-qiang, SUN You-ping, CHEN Zhen-hua, XU Zheng-kun (College of Material Science and Engineering, Hu'nan University, Changsha Hu'nan 410082, China; Changsha University, Changsha Hu'nan 410082, China);Current state and trend of tube spinning[A];[C];2005
3 F. Ma a, H. Yang b, M. Zhan c School of Materials Science and Engineering, Northwestern Polytechnical University, P.O. Box 542,Xi’an, Shaanxi, 710072, P. R. China;Research on Distribution of Stress and Strain Field in Power Spinning Process of Parts with Transverse Rib[A];[C];2007
4 GAO Tie-jun WANG Zhong-jin DENG Jian-dong (School of Materials Scienee and Engineering,Harbin Inst.of Technology Harbin 150001,China);Influence of Necking Length on Viscous Medium Outer Pressure Necking Forming[A];[C];2007
5 Yang Yantao Han Dong Zhang Liwu Xi'an Aerospace Power Machinery Factory,xi'an,710025;Research on spinning process of aluminium alloy case with curved surface[A];[C];2007
7 Zhang Bao-qing, Zhan Zai-ji, Wang Wen-kui (Yanshan University, Qinhuangdao 066004, Hebei, P.R.China) Zhang Lian-yong, Jia Yuan-zhi (Harbin Institute of Technology, Harbin Heilongjiang 150001, China);Novel Technology for Controlling Solidification Microstructure in Alloys[A];[C];2005
8 Li Shuang-shou, Tang Bin, Zheng Da-ben(Tsinghua University, Beijing 100084) Lu Shuo, Wu Hanqi(Dicastal Wheel Mfg Co., Ltd, Qinhuangdao 066003);Present state and prospect of light alloy wheels on automotive[A];[C];2005
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 LIU Ying,QU Zhou-de, WANG Ben-xian(The School of Mechanical Engineering, Northeastern University, Shenyang 110004, China; Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China);Research development and application of Ti6A14V alloy[J];Ordnance Material Science and Engineering;2005-01
2 XU Wen-chen, SHAN De-bin, LU Yan,LI Chun-feng (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China,);Research on the multi-pass shear spinning technology of small-angle conical workpieces[J];Material Science and Technology;2004-01
3 ZHAN Mei, YANG He, LI Zhen-bin(Department of Materials Forming and Control, College of Materials Science & Engineering, Northwestern Polytechnical University, Xi'an 710072, China,);FEM numerical analysis of springback law of NC tube bending[J];Material Science and Technology;2004-04
4 JIN Chao-hai, ZHOU Xian-bin, DIAO Ke-shan, LI Xiao-xing(Beijing University of Aeronautics and Astronautics, Sheet Metal Forming Research Center, Beijing 100083, China);Springback analysis for stretch bending of aluminum profile[J];Material Science and Technology;2004-04
5 CHEN Lei1,YANG Ji-chang1,ZHANG Li-wen2(1.School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013,China;2.Dept.of Materials Engineering,Dalian University of Technology,Dalian 116023,China);Research on the factors influencing bending springback of sheet metal by FEM[J];Materials Science and Technology;2007-02
6 (South China University of Technology) Zhou Zhaoyao; Ruan Feng(Harbin Institute of Technology) Lu Yan; Wang Zheng; Xue Keming;3D rigid-plastic finite element analysis of backward spinning of cylindrical workpiece[J];FORGING & STAMPING TECHNOLOGY;1997-01
7 Northwestern Polytechnical Univresity L i Kezhi L i Hejun Harbin Institute of Technology Xue Kemin Lu Yan;Influence of process parameters on residual stress distribution in backward tube spinning[J];Forging & Stamping Technology;1997-04
8 Yanshang University Zhang Tao Lin GangBeiman Special Steel Co.Ltd. Zhou Jinglong;Three dimension FEM numerical simulation of tube necking-in spinning process[J];Forging & Stamping Technology;2001-05
9 Harbin Institute of Technology Cui Lingjiang Yang Yuying Yanshan University Li Suoben;Test study on shear stress wrinking in sheet metal forming[J];Forging & Stamping Technology;2002-02
10 ;Simulation analysis on forward tube spinning force[J];METALFORMING MACHINERY;1999-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved