Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials Science and Engineering》 2000-04
Add to Favorite Get Latest Update

Resin Transfer Molding:A Novel Shaping Process for Composite Materials

MA Qing\|song, CHEN Zhao\|hui, ZHENG Wen\|wei, HU Hai\|feng,XIAO Jia\|yu (Key Laboratory of Novel Ceramic Fibers and Composite Materials,National University of Defense Technology,Changsha\ 410073,China)  
Resin Transfer Molding(RTM),a novel shaping process with many special advantages for polymer matrix composites has developed very rapidly in recent years.This paper reviewed the procedure and survey of research and application of RTM,and development prospects were introduced at the end.\;
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 CHAI Hong-mei,WANG Lei,LV Jin-yan(Beijing Composite Material Co.,Ltd.,Beijing 102101,China);STUDY ON THE MODERATE TEMPERATURE CURING EPOXY RESIN SYSTEM FOR RESIN TRANSFER MOLDING[J];Fiber Reinforced Plastics/Composites;2009-01
2 MA Qing song, CHEN Zhao hui, ZHENG Wen wei, HU Hai feng (Key Laboratory of Novel Ceramic Fibers &Composites Materials, National University of Defense Technology, Changsha 410073, China);Preparation of Complex-Shaped C_f/Si-O-C Parts via Resin Transfer Molding and Pyrolysis[J];Journal of Materials Engineering;2001-12
3 MA Qing\|song, CHEN Zhao\|Hui, ZHENG Wen\|wi, HU Hai\|feng (Key Lab of Novel Ceramic Fibers & Composite Materials, National University of Defense Technology, Hunan Changsha\ 410073, China);Research and Development of Continuous-Fiber-Reinforced Ceramic Matrix Composites Fabricated by Precursor-Infiltration-Pyrolysis[J];Materials Science and Engineering;2001-04
4 YAN Gang1,FAN Xiao-bin1,ZHANG Xiao-mei1,ZHAO Dan2,ZHAO Da-wei3(1.Luoyang Research Institute of Shipping Material,Luoyang 471039,China;2.Mechanical and Electronic School of Shandong University of Science and Technology,Qingdao 266510,China;3 Wuhan Ship Design & Development Institute,Wuhan 430064,China);Effects of RTM Process Parameters on the Performance of Composites[J];Development and Application of Materials;2008-02
5 ;APPLICATION AND MOULDING TECHNOLOGY OF AUTOMOBILE PLASTIC INTERIORS[J];;2005-12
6 JIN Xiu-zhi,LIU Ya-qing,ZHANG Yan-fei(Research Center for Engineering Technology of PolymericComposites of Shanxi Province,North University of China,Taiyuan 030051,China);Application of Low Melting Point Alloy in Resin Transfer Molding[J];Journal of North University of China(Natural Science Edition);2007-S1
7 Qi Yanyan Liu Yaqing Zhang Yanfei(Department of Chemical Engineering,North University of China,Taiyuan 030051);Process and application of new-type resin transfer molding[J];New Chemical Materials;2006-03
8 KONG Jin-feng,ZHANG Yan-fei,LIU Ya-qing (Research Center for Engineering Technology of Polymeric Composites of Shanxi Province,North University of China,Taiyuan 030051,China);Research Progress in Numerical Simulation of RTM Process[J];Insulating Materials;2008-04
9 Dong Yongqi;New Development of Processes for Resin Matrix Composites in China[J];Fiber Composites;2003-02
10 WANG Ruonan1,WU Xiaoqing1,LOU Xiaojie2(1.Key Laboratory for Advanced Textile Composites of Ministry of Education,Tianjin Polytechnic University,Tianjin 300160)(2.Harbin FRP Institute,Herbin 150036,China);Application of Silicon Rubber Inflatable Bag in RTM Technology[J];Fiber Composites;2007-04
China Proceedings of conference Full-text Database 1 Hits
1 CHAI Hong-mei WANG Lei LV Jin-yan LI Peng XUE Zhong-min (1.Beijing Composite Materials Co.,Ltd.,Beijing 102101,China; 2.Institute of Carbon Fiber and Composites,Beijing University of Chemical Technology,Beijing 100029,China);EFFECT OF PRE-CURING ON EPOXY RESIN SYSTEM FOR RESIN TRANSFER MOLDING[A];[C];2008
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Gao Keqiang, Li Xinhua, Xue Zhongmin, Guo Hong, Zhang Xiongjun ( Beijing FRP Research and Design Institute 102101);APPLICATION STATUS AND DEVELOPMENT PROSPECT OF RTM IN THE AUTOMOBILE INDUSTRY[J];Engineering Plastics Application;2000-09
2 Zhang Heng Zhang Li(Zhengzhou University 450052) (Beijing Technology and Business University 100037);THE RTM MELTABLE CORE SHAPING OF PHENOLIC RESIN COMPOSITE[J];Engineering Plastics Application;2001-04
3 Wang Tengning Liu Jun (Shandong Institute of Architecture and Engineering, Jinan 250014, China) (Institute 53 of China's Ordnance Industry Group, Jinan 250031, China);APPLICATION OF PLASTICS IN THE AUTOMOBILES ABROAD[J];Engineering Plastics Application;2003-07
4 Chen Zhiping,Zhang Miaogen,Zou Youg(Chengdu Aeronautic Vocational & Technical College,Chengdu 610021, China);APPLICATION OF FUSIBLE CORE IN INJECTION MOULDING[J];Engineering Plastics Application;2006-03
5 Li Hua~(1,2),Feng Shengyu~1,Jin Ziming~2(1.School of Chemistry and Chemical Engineering,Shandong University,Jinan 250100,China;2.CNGC Institute 53,Jinan 250031,China);STUDY ON THE VINYLESTER RESIN/GLASS FIBER IMPACT RESISTANCE COMPOSITE[J];Engineering Plastics Application;2006-04
6 Liu Xiongxiang (Hunan Institute of Technology, Hengyang 421008, China);THE NEW TECHNOLOGY OF FUSIBLE CORE INJECTION MOULDING[J];Engineering Plastics Application;2006-08
7 Hu Xiaobin Ma Yulu Wang Zhengdong Wu Dongdi (East China University of Science and Technology);THE PERMEABILITY OF GLASS FIBER AND ITS INFLUENCE ON FILLING TIME OF RTM PROCESS[J];Fiber Reinforced Plastics/Composite;1996-03
8 Zhang Gangyi Shen Yukao (China Scientific & Technological lndustrial Group Corporation of Inorganic Materials);INTRODUCTION OF RESIN FLOW CONTROL IN RTM TECHNOLOGY[J];FIBER REINFORCED PLASTICS/COMPOSITE;1999-05
9 Sun Wenqiang Zeng Hui Niu Langang Gu Youwei (Beijing University of Chemical Technology);STUDY ON THE SURFACE TREATMENT OF GLASS FIBRE FOR HIGH PERFORMANCE COMPOSITES[J];FIBER REINFORCED PLASTICS/COMPOSITE;2000-01
10 Long Hairu(China Textile University);RESEARCH PROGRESS IN WEFT KNITTLED FABRIC REINFORCED COMPOSITES[J];FIBER REINFORCED PLASTICS/COMPOSITE;2000-02
China Proceedings of conference Full-text Database 1 Hits
1 Li Dan Duan Yuexin Liang Zhiyong (Beijing Univisity of Aeronautics and Astronautics, Beijing, 100083);COMPUTER SIMULATION AND ANALYSIS FOR A WIND CAP IN RTM PROCESS[A];[C];2002
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Wen, WANG Hong - jie, JIN Zhi - hao (State Key Laboratory for Mechanical Behavior of Materials,School of Materials Science and Engineering, Xi'an Jiaotong University,Xi'an Shanxi 710049,China);Preparation of BN matrix composites by precursor thermolysis[J];Ordnance Material Science and Engineering;2004-05
2 MA Qing song, CHEN Zhao hui, ZHENG Wen wei, HU Hai feng (Key Laboratory of Novel Ceramic Fibers &Composites Materials, National University of Defense Technology, Changsha 410073, China);Fabrication of Three dimensional Carbon Fiber Reinforced Si - O - C Composites via Polymer Pyrolysis Assisted by Hot pressing[J];Journal of Materials Engineering;2002-05
3 JIAN Ke~1,CHEN Guo-min~2,CHEN Zhao-hui~1,MA Qing-song~1 (1 Key Laboratory of Novel Ceramic Fibers & Composite Materials, National University of Defense Technology, Changsha 410073, China; 2 Hunan City University, Yiyang 413000,China);Effect of SiC Powder Content on the Mechanical Properties of Carbon Fiber Cloth Reinforced SiC Composites Fabricated via Precursor Pyrolysis[J];Journal of Materials Engineering;2003-12
4 ZHANG Yu-di,ZHOU Xin-gui,ZHANG Chang-rui Aerospace and Materials Engineering,National University of Defense Technology,Changsha 410073,China);Development and Application of C_f/SiC Ceramic Matrix Composites[J];Journal of Materials Engineering;2005-04
5 DUAN Yue-xin,YAO Fu-jun,ZHANG Zuo-guang(School of Material Science and Engineering,BeijingUniversity of Aeronautics and Astronautics,Beijing 100083,China);Study on Simulation and Control of Dryspot Defect For RTM Processing[J];Journal of Materials Engineering;2006-S1
6 WANG Xiu-fei1,HUANG Qi-zhong1,SU Zhe-an1,YANG Xin1,WU Cai-cheng2,NING Ke-yan2(1 State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China;2 National Key Laboratory of Vehicle Transmission,China North Vehicle Research Institute,Beijing 100072,China);Effects of Si Content on Mechanical Properties of C/C-SiC Composites[J];Journal of Materials Engineering;2007-09
7 Yang Feiyu,Du Shanyi,Meng Songhe(Harbin Institute of Technology,Harbin 15001,China);Fabrication and Properties of Short Carbon Fiber-ZrB_2 Ceramic Matrix Composites[J];Rare Metal Materials and Engineering;2007-S1
8 MA Qingsong, CHEN Zhaohui, ZHENG Wenwei, HU Haifengfense Technology,Changsha 410073);FABRICATION AND MECHANICAL PROPERTIES OF THREE-DIMENSIONAL CARBON FIBER REINFORCED Si-O-C COMPOSITES USING POLYSILOXANE AS PRECURSOR[J];Acta Materiae Compositae Sinica;2003-02
9 SUN Yumin, DUAN Yuexin~*, LI Dan, LIANG Zhiyong, ZHANG Zuoguang(School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China);COMPUTER SIMULATION ANALYSIS AND OPTIMIZATION FOR WIND TURBINE BLADE[J];Acta Materiae Compositae Sinica;2005-04
10 XU Li-dan, WANG Lan (Department of Material Science and Engineering, Beijing Technology and Business University, Beijing 100037,china);Study of resin matrix composites reinforced by carbon fiber[J];Plastics Manufacture;2007-Z1
China Proceedings of conference Full-text Database 2 Hits
1 ZHANG Minglong~(1,2) YIN Changping~2 LIANG Jifeng~1 XIAO Jiayu~2 ZENG Jingcheng~2 (1 Deportment of Airport Engineering,Xuzhou Air Force College,Xuzhou 221000;2 College of Aerospace and Material Engineering,National University of Defense Technology,Changsha 410073);Development of Flexible Resin Transfer Molding Process[A];[C];2007
2 Ma Qingsong Chen Zhaohui Zheng Wenwei Hu Haifeng (Key Lab of CFC National University of Defense Technology, Changsha, 410073, China);CURING AND PYROLYSIS OF LOW-COST POLYSILOXANE AS THE PRECURSOR TO Si-O-C CERAMICS[A];[C];2002
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved