Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Rare Metal Materials and Engineering》 2003-09
Add to Favorite Get Latest Update

Influence of Milling Rate and Process Control Agents on Mechanica l Alloying of Ti-26Cr

Xiao Pingan 1 ,Qu Xuanhui 2 ,Qin Mingli 2 ,Huang Peiyun 3 (1.Changsha University of Science an d Technology,Changsha 410076 ,Chin a)(2.University of Science and Technology Beijing,Beijing 10008 3,China)(3.State Key Laboratory for Powder Me tallurgy,Central South Un iv ersity,Changsha 410083,China)  
The influence of milling rate in range from 125r/min to 225r/min and the ad dition of from 0%to 4. 5%of the process control agents ethanol,stearic acid on the mechanical alloyi ng of a Ti-Cr alloy h as been investigated.The results sh ow that the higher t he milling rate,the smaller the powders as other milling conditions are unchang ed.Ethanol as a useful process control a gent lowes the impurity level during M A processing,but results in reduced fining efficiency.The reco mended addition of ethanol is under 1.5%.The abrasion of either milling balls or milling j ar can be controlled by optimizing the milling r ate and selection the best proc ess co ntrol agent.
【Fund】: 国家自然科学基金资助项目(59871064)
【CateGory Index】: TF125
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 5 Hits
1 YAN Shi,JIN Zhu-ji,MA Xing-wei(School of Mechanical Engineering,Dalian University of Technology,Liaoning Dalian 116024,China);INFLUENCE OF HIGH POWER BALL MILLING TIME ON STRUCTURAL CHANGE OF Fe-Al POWDER ALLOYING[J];粉末冶金工业;2009-06
2 HUANG Minggang,LU Shiqiang,XIAO Xuan,HU Ping,LI Xin(School of Material Science and Engineering,Nanchang Hangkong University,Nanchang,330063,China);Effects of Ball Milling Time on Microstructure and Properties of Soft Second Phase Toughening Cr_2Nb Based Composite[J];热加工工艺;2008-16
3 HU Jun-hua,WU Yu-ping,CAO Ming,LIN Ping-hua(College of Materials Science and Engineering,Hohai University,Nanjing Jiangsu 210098,China);Effects of High Energy Ball Milling on In-Situ Synthesis of TiC/Ni Layer Contolled by Plasma Cladding[J];金属热处理;2007-11
4 LIU Xin,XIA Zhi-dong,LEI Yong-ping,SHI Yao-wu(The Key Laboratory of Advanced Functional Material Ministry of Education China, Beijing University of Technology,Beijing 100022,China);Effect of ball milling condition on formation of Sn-0.7Cu alloy[J];焊接学报;2005-05
5 Zhang Zhongwu,Zhou Jingen ,Xi Shengqi,Li Pengliang,Zhang Wenxing,Rang guang(Xi’an Jiaotong University,Xi’an 710049,China);Studies on Thermodynamic and Kinetic and Phase Evolution of W-Ni-Fe Powder during Mechanical Alloying[J];稀有金属材料与工程;2004-10
【Citations】
Chinese Journal Full-text Database 4 Hits
1 Ouyang Yifang1,2,Zhong Xiaping1,3, Xiao Hongling1, Wu Weiming1(1. Guangxi University, Nanning 530004, China)(2. International Center of Materials Physics, Chinese Academy of Sciences, Shengyang 110016, China)(3. Guilin Institute of Technology, Guilin 541004, China);Progress in Research of Cryomilling[J];稀有金属材料与工程;2003-06
2 XIAO Ping-an, QU Xuan-hui, LEI Chang-ming, QIN Ming-li, ZHU Bao-jun, GAO Jian-xiang, HUANG Pei-yun(State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China;Department of Automobile and Electro-mechanic Engineering, Changsha Communications University, Changsha 410076, China;School of Materials Science and Engineering, Science and Technology University of Beijing, Beijing 100083, China);Mechanical alloying of hypereutectoid Ti - Cr alloys[J];材料科学与工艺;2002-03
3 YANG Junyou; WU Jiansheng; ZENG Zhenpeng(The Open Laboratory of Education Ministry for High Temperature Materials and High Temperature Tests,Shanghai Jiaotong University, Shanghai 200030)Correspondent: YANG Junyou, postdoctoral research,Tel: (021)62812440;INVESTIGATION ON THE DEFORMATION AND ENERGY TRANSFER OF POWDERS DURING MECHANICAL ALLOVING[J];金属学报;1998-10
4 Wang Chengguo,Wu Jun,Liu Yuxian and Yang Junfa(Shandong University of Tehnology,250061);Effect of Process Control Agent on Mechanical Alloying of Fe C Ti Alloy Powder[J];粉末冶金技术;1997-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 HE Tian-bing;CHU De-sheng;TANG Peng-jun;WANG Xing-yuan;HE Xiao-lei;LI Pei-yong;HU Ren-wei;Beijing Institute of Aeronautic Materials;Beijing Engineering Research Center of Advanced Aluminum Alloy and Application;The Headquarters of the General Staff of the Aviation Department Equipment Development Office;;Microstructure and Mechanical Properties of Al-Cu-Mg Alloy Prepared by Cryomilling Combined Powder Metallurgy[J];航空材料学报;2015-06
2 WANG Bo;LIU Dongdong;DONG Zhongqi;SUN Huilan;LIU Jiajia;School of Materials Science and Engineering,Hebei University of Science and Technology;Material Engineering Department,Hebei College of Industry and Technology;;Research on the Development of Cu-Cr Mechanical Alloying[J];材料导报;2015-19
3 Wang Fenling;Yang Qing;Zou Juntao;Liang Shuhua;Xi'an University of Technology;Shaanxi Province Key Laboratory for Electrical Materials and Infiltration Technology;;Mechanical Alloying Preparation of Ni-B-Si Alloy Powers[J];稀有金属材料与工程;2015-08
4 HU Xue;HUANG Lixin;YAN Wei;WANG Wei;SHAN Yiyin;YANG Ke;Institute of Metal Research, Chinese Academy of Sciences;University of Chinese Academy of Sciences;State Key Laboratory of Metastable Materials Science and Technology, Yanshan University;;STUDY ON MICROSTRUCTURE STABILITY OF A Y_2O_3 DISPERSION STRENGTHENED LOW-ACTIVATION STEEL[J];金属学报;2015-06
5 CAO Jie-yi;XIAO Ping-an;LEI Bao;ZHANG Xiao-hu;FAN An-ping;XUAN Cui-hua;College of Materials Science and Engineering, Hunan University;;High-energy planetary milling of TiH_2 powders and sintering of titanium alloy with ultrafine grains[J];中国有色金属学报;2013-10
6 YUE Gang,CAI Xiao-lan,WANG Kai-jun,WANG Xiao-fei,SUN Hong-peng,CHEN Ya-guang(Faculty of Metallurgical and Energy Engineering,Kunming University of Science and Technology,Kunming 650093,Yunnan,China);Experimental Study on Interfacial Reaction of CNTs/Al Matrix Composites[J];矿冶工程;2013-01
7 ZHOU Jun-feng,ZHAO Xiang-yu,LI Jia-jia,MA Li-qun,DING Yi(College of Materials Science and Engineering,Nanjing University of Technology,Nanjing 210009,China);Amorphous Ti_2Ni Alloys Prepared by Mechanical Alloying and Its Hydrogen Storage Properties[J];机械工程材料;2013-01
8 Zhang Min1,Li Yufang1,Guo Jianting2,Shen Yifu1(1.Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China)(2.Institute for Metal Research,Chinese Academy of Sciences,Shenyang 110016,China);Research on Fabrication of NiAl Coatings by Mechanical Alloying[J];稀有金属材料与工程;2012-S2
9 Zhang Dandan1),Ni Feng1),Wei Shizhong2),Xu Liujie1),2) 1)(School of Materials Science and Engineering,He'nan University of Science and Technology,Luoyang 471003,China) 2)(He'nan Engineering Research Center for Wear of Materials,He'nan University of Science and Technology,Luoyang 471003,China);Influence of process control agent on the refinement of Al_2O_3/Mo composite powder[J];粉末冶金技术;2011-06
10 LI Ping1),WANG Teng1),FAN Li-zhen1),DIN Rafi-ud1,2),QU Xuan-hui1) 1) School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China 2) Chemistry Division,Pakistan Institute of Nuclear Science and Technology,Nilore Islamabad,Pakistan;Preparation and performance of Mg-4%Ni-1%NiO hydrogen storage materials by cryomilling[J];北京科技大学学报;2011-07
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 XIAO Xuan1,2,LU Shi-qiang2,MA Yan-qing2,YAN Jian-wu2,HU Ping2(1.College of Electromechanical Engineering,Nanjing University of Aeronautical and Astronautics,Nanjing 210016,China;2.Department of Material Science and Engineering,Nanchang Institute of Aeronautical Technology,Nanchang 330034,China);Investigation on Microstructures and Properties of NbCr_2 Laves Phase Alloys Prepared by Mechanical Alloying Followed by Hot Pressing[J];航空材料学报;2007-05
2 CAI Li-fang,ZHANG Yong-zhong,XI Ming-zhe,SHI Li-kai(National Engineering Research Center for Nonferrous Metal Composites,General Research Institute for Nonferrous Metals,Beijing 100088,China);Applications and Development of In-situ Synthesis for Materials Preparation[J];金属热处理;2005-10
3 WU Yu-ping~(1, 2), LIN Ping-hua~1, WANG Ze-hua~1 (1. Department of Materials Science and Engineering, Hohai University, Nanjing 210098, China; 2. Department of Materials Science and Engineering, Southeast University, Nanjing 210096, China);Microstructure and properties of in-situ synthesis of TiC particle reinforced composite coating by plasma cladding[J];中国有色金属学报;2004-08
4 WU Yu-ping~(1,2), PENG Zhu-qin~3, LIN Ping-hua~2(1.Dept. of Material Science and Technology, Southeast University, Nanjing 210096,China, 2 Dept.of Material Science and Technology, Hehai University, Nanjing 210098,China; 3. Dept.of Mechanical Engineering, Zhongyuan Institute of Technology, Zhengzhou 450007,China);In-situ synthesis of TiC particle reinforced nickel base alloy composite coating by plasma cladding[J];材料科学与工艺;2004-04
5 ZHANG Zhong-wu, ZHOU Jing-en , XI Sheng-qi, RANG guang, LI Peng-liang, ZHANG Wen-xing (School of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, China);Study on Synthesis and Structure of Mechanically Alloyed W-Ni-Fe Nanocomposite Powders[J];金属热处理学报;2004-01
6 Xiao Pingan 1 ,Qu Xuanhui 2 ,Qin Mingli 2 ,Huang Peiyun 3 (1.Changsha University of Science an d Technology,Changsha 410076 ,Chin a)(2.University of Science and Technology Beijing,Beijing 10008 3,China)(3.State Key Laboratory for Powder Me tallurgy,Central South Un iv ersity,Changsha 410083,China);Influence of Milling Rate and Process Control Agents on Mechanica l Alloying of Ti-26Cr[J];稀有金属材料与工程;2003-09
7 ZHANG Xian sheng 1,RAN Guang 2 (1 Panzhihua Iron and Steel (Group) Corporation Office,Panzhihua Sichuan 617067,China; 2 School of Materials Science and Engineering,Xi'an Jiaotong University,Xi'an Shanxi 710049,China);Review of the Reactive Mechanism in Mechanical Alloying[J];金属热处理;2003-06
8 ZHANG Hu 1, GAO Wen li 2, ZHANG Er lin 2, ZENG Song yan 2 (1.School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China; 2.School of Materials Science and Engineering, Harbin Institute o;SURFACE STRUCTURE AND GROWTH MECHANISM OF TiB_2 PLATE IN TiAl-B ALLOYS[J];复合材料学报;2002-02
9 WU Yu\|Ping (Department of Materials Science and Engineering, Shandong University of Science and Technology, Tai'an 271019,China).;The Crystal and Amorphous Phase in Cladding Layer by Compressed Arc Plasma Beam[J];金属热处理学报;2002-01
10 YIN Yan-sheng 1,ZHANG Jin-sheng 1,2 ,LI Jia 1,3 LIU Ying-cai 1,6 ,TAN Xun-yan 1,GONG Hong-yu 1,MENG Fan-qin 4,LIU Lei 5 (1 Key Lab.For Liquid Structure and Heredity of Ministry of Education,Shandong,China;Engineering Ceramics Key La;SEMI-CERAMIC MATERIAL——INTERMATALLIC COMPOUND MATERIALS AND ITS APPLICATIONS[J];中国陶瓷;2002-01
【Secondary References】
Chinese Journal Full-text Database 6 Hits
1 Li Gang;Han Feng;Shen Yu;Shen Jinze;Wang Yan;Liaoning Technical University;;Influence of Tungsten Concentrate Content on Microstructure and Properties of(Fe-Cr)-Al Alloys by Laser Sintering[J];稀有金属材料与工程;2015-07
2 BAI Xintao;WANG Jinxia;XIE Hongwei;CUI Fuhui;ZHAI Yuchun;School of material and metallurgy,Northeastern University;School of Science,Northeastern University;;Development of non-traditional TiC synthetic methods[J];有色金属科学与工程;2015-01
3 Ma Yunzhu;Ye Xiaoshan;Liu Wensheng;Zhang Jiajia;State Key Laboratory for Powder Metallurgy,Central South University;;Research progess of the tungsten-based amorphous alloys by Mechanical Alloying[J];粉末冶金技术;2014-02
4 ZHANG Hong1,TANG Wen-ming1,2,WU Yu-cheng1,2,ZHENG Zhi-xiang1(1.School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China;2.Engineering Laboratory of Nonferrous Metals and Processing of Anhui Province,Hefei 230009,China);Synthesis of Sn-Cu binary alloy powders by mechanical alloying[J];材料热处理学报;2010-11
5 Zuo Kesheng,Xi Shengqi,Zhou Jing′en(State Key Laboratory for Mechanical Behavior of Materials, Xi′an Jiaotong University,Xi′an 710049,China);Temperature Effect on Mechanical Alloying of Cu-Zn Binary[J];西安交通大学学报;2007-01
6 ZUO Ke-sheng,XI Sheng-qi,ZHOU Jing-en,LIU Guo-yuan,ZHU Rui-hua(State Key Laboratory for Mechanical Behavior of Materials,School of Materials Science and Engineering,Xi'an Jiaotong University,Xi'an 710049,Shaanxi);Mechanical alloying of copper-zinc powders at cryogenic conditions[J];中国有色金属学报;2005-10
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Hu Jifan,Qin Hongwei,Sui Zhengui,L u Hongliang(Shandong University,Jinan 250100,China);Lattice Distortion and the High Pressure Phase in Nanoparticles TiO_2 Induced by High Energy Mechanical Milling[J];稀有金属材料与工程;2003-01
2 XIAO Ping an 1, 2 , QU Xuan hui 1, 3 , LEI Chang ming 1, GAO Jian xiang 1, ZHU Bao jun 1, QIN Ming li 1, HUANG Pei yun 1 (1. State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China; 2. A;Preparation of hypereutectoid Ti-Cr alloys with Laves phase TiCr_2[J];中国有色金属学报;2002-02
3 Fan Jinglian, Huang Baiyun, Qu Xuanhui, Zhao Muyue (Central South University, Changsha 410083, China);Characteristics of High Energy Milled W-Ni-Fe Nanocomposite Powders[J];稀有金属材料与工程;2001-03
4 Zhang Hui, Ding Bingjun (Xi'an Jiaotong University, Xi'an 710049);Electron Emission of W Nano ThO_2 Electrode[J];稀有金属材料与工程;2000-01
5 REN Shan; HONG Lan; ZHANG Jinxiu (Department of Physics, Zhongshan University, Guangzhou 510275)LU Manqi; HU Zhuangqi (State Key Lab of RSA, Institute of Metal Research, Shenyang 110015);HYDROGEN INDUCING AMORPHIZATION OF Ti-Fe SYSTEM IN MECHANICAL ALLOYING[J];金属学报;1998-04
6 Jia Dechang, Zhou Yu, Lei Tingquan (Harbin Institute of Technology, P O Box 433, Harbin 150001);Thermal Stability of Al-12Ti-6Nb Alloy Prepared by Mechanical Alloying[J];稀有金属材料与工程;1997-04
7 Wu Yuming, Lei Yongquan, Wu Jing, Wang Qidong (Zhejiang University, Hangzhou 310027);Electrochemical Behaviour of Some Mechanically Alloyed Mg-Ni-based Amorphous Hydrogen Storage Alloys[J];稀有金属材料与工程;1997-03
8 Luo Guozhen(Northwest institute for Nonferrous Metal Research, Xi′an 710016);Recent Development of Titanium Metallic Matrix Composites[J];稀有金属材料与工程;1997-02
9 Wu Jun; Wang Chengguo; Sun Kangning(Shandong University of Technology);Study of TiC Dispersion Strengthening Fe Base Alloy Powder[J];金属热处理学报;1996-04
10 Wang Chengguo,Qi Yongxin, and Peng Qifeng (Shandong Polytechnic University, Jinan 250014);APPLICATION OF MECHANICAL ALLOYING FOR MANUFACTURING ODS AND CDS ALLOYS[J];粉末冶金技术;1994-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved