Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Rare Metal Materials and Engineering》 2004-10
Add to Favorite Get Latest Update

Studies on Thermodynamic and Kinetic and Phase Evolution of W-Ni-Fe Powder during Mechanical Alloying

Zhang Zhongwu,Zhou Jingen ,Xi Shengqi,Li Pengliang,Zhang Wenxing,Rang guang(Xi’an Jiaotong University,Xi’an 710049,China)  
W6.56Ni2.28Fe tungsten heavy alloy from the elemental powders of W, Ni and Fe was mechanically alloyed(MA). Phase was defined by XRD. Microstructure was observed by TEM (JEM-2000 type). Phase evaluation, grain size and lattice distortion of these powders were determined and discussed. And nano-crystalline supersaturated solid solutions and amorphous were prepared by MA. A thermodynamic model was developed based on Miedema semi-experimental theory to calculate the driving force for phase evolution. The thermodynamic analysis showed that there is no chemical driving force to form amorphous alloys. The model of multilayer amorphization during MA was applied to illustrate the feasibility of amorphization of powder with neither ?Hmix 0 nor DB DA
【CateGory Index】: TG131
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 Ran Guang, Zhou Jing’en, Xi Shengqi, Wang Yongfang (State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049, China);Study on the Nano-Crystalline and Amorphous Al-Pb Series Powders Synthesized by Mechanical Alloying[J];Rare Metal Materials and Engineering;2005-10
2 Guo Yongfeng,Ding Chunhua,Zhang Hongtao,Yang Zhimao,Ding Bingjun(State Key Laboratory for Mechanical Behavior of Material,Xi'an Jiaotong University,Xi'an 710049,China);The Preparation of PS304 Nonacomposite Powders by High Energy Milling[J];Rare Metal Materials and Engineering;2006-12
3 Zuo Kesheng,Xi Shengqi,Zhou Jing′en(State Key Laboratory for Mechanical Behavior of Materials, Xi′an Jiaotong University,Xi′an 710049,China);Temperature Effect on Mechanical Alloying of Cu-Zn Binary[J];Journal of Xi'an Jiaotong University;2007-01
4 ZUO Ke-sheng,XI Sheng-qi,ZHOU Jing-en,LIU Guo-yuan,ZHU Rui-hua(State Key Laboratory for Mechanical Behavior of Materials,School of Materials Science and Engineering,Xi'an Jiaotong University,Xi'an 710049,Shaanxi);Mechanical alloying of copper-zinc powders at cryogenic conditions[J];The Chinese Journal of Nonferrous Metals;2005-10
【Citations】
Chinese Journal Full-text Database 2 Hits
1 Xiao Pingan 1 ,Qu Xuanhui 2 ,Qin Mingli 2 ,Huang Peiyun 3 (1.Changsha University of Science an d Technology,Changsha 410076 ,Chin a)(2.University of Science and Technology Beijing,Beijing 10008 3,China)(3.State Key Laboratory for Powder Me tallurgy,Central South Un iv ersity,Changsha 410083,China);Influence of Milling Rate and Process Control Agents on Mechanica l Alloying of Ti-26Cr[J];Rare Metal Materials and Engineering;2003-09
2 ZHANG TONGJUN; YANG JUNYOU; ZHANG JIE; CUI KUN(National Laboratary for Die Technology, Huazong University of Science & Technology, Wuhan 430074);THERMODYNAMICS OF MECHANICAL ALLOYED Fe-Ni[J];JOURNAL OF APPLIED SCIENCES;1997-04
【Co-citations】
Chinese Journal Full-text Database 7 Hits
1 ZHU Lihui, MA Xueming(Shanghai University, Shanghai 200072, China);Progress in Research on Martensitic Transformation of Nano-sized Fe-Ni Materials[J];Materials For Mechanical Engineering;2002-12
2 ZHOU Wen-zheng~1, OUYANG Yi-fang~(1,2), QIN Shan-hua~1, ZHONG Xia-ping~1, WU Wei-ming~1 (1.College of Physics Science and Engineering Technology,Guangxi University,Nanning 530004,China; 2.International Center of Materials Physics,Academia Sinica,Shenyang 110016,China);The study of mechanical alloyed Al_(1-x)Fe_x[J];Journal of Guangxi University(Natural Science Edition);2004-02
3 YAN Shi,JIN Zhu-ji,MA Xing-wei(School of Mechanical Engineering,Dalian University of Technology,Liaoning Dalian 116024,China);INFLUENCE OF HIGH POWER BALL MILLING TIME ON STRUCTURAL CHANGE OF Fe-Al POWDER ALLOYING[J];Powder Metallurgy Industry;2009-06
4 LIU Xin,XIA Zhi-dong,LEI Yong-ping,SHI Yao-wu(The Key Laboratory of Advanced Functional Material Ministry of Education China, Beijing University of Technology,Beijing 100022,China);Effect of ball milling condition on formation of Sn-0.7Cu alloy[J];Transactions of The China Welding Institution;2005-05
5 HU Jun-hua,WU Yu-ping,CAO Ming,LIN Ping-hua(College of Materials Science and Engineering,Hohai University,Nanjing Jiangsu 210098,China);Effects of High Energy Ball Milling on In-Situ Synthesis of TiC/Ni Layer Contolled by Plasma Cladding[J];Heat Treatment of Metals;2007-11
6 Tao Wenhong,Gong Yansheng,Yue Yunlong(School of Material Science and Engineering, Jinan University,Jinan 250022,China);Thermodynamical Analysis of Mechanical Alloyed Ti-Al[J];Journal of Shandong Institute of Building Materials;2003-02
7 HUANG Minggang,LU Shiqiang,XIAO Xuan,HU Ping,LI Xin(School of Material Science and Engineering,Nanchang Hangkong University,Nanchang,330063,China);Effects of Ball Milling Time on Microstructure and Properties of Soft Second Phase Toughening Cr_2Nb Based Composite[J];Hot Working Technology;2008-16
【Co-references】
Chinese Journal Full-text Database 9 Hits
1 Ouyang Yifang1,2,Zhong Xiaping1,3, Xiao Hongling1, Wu Weiming1(1. Guangxi University, Nanning 530004, China)(2. International Center of Materials Physics, Chinese Academy of Sciences, Shengyang 110016, China)(3. Guilin Institute of Technology, Guilin 541004, China);Progress in Research of Cryomilling[J];Rare Metal Materials and Engineering;2003-06
2 ZHANG Zhong-wu, ZHOU Jing-en , XI Sheng-qi, RANG guang, LI Peng-liang, ZHANG Wen-xing (School of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, China);Study on Synthesis and Structure of Mechanically Alloyed W-Ni-Fe Nanocomposite Powders[J];Transactions of Metal Heat Treatment;2004-01
3 ZHANG Zhong wu,RAN Guang,ZHOU Jing en (School of Material Science and Engineering,Xian Jiaotong University,Xian Shaanxi 710049,China);Progress of the Research Work on Tungsten Heavy Alloys[J];Heat Treatment of Metals;2003-02
4 ZHANG Xian sheng 1,RAN Guang 2 (1 Panzhihua Iron and Steel (Group) Corporation Office,Panzhihua Sichuan 617067,China; 2 School of Materials Science and Engineering,Xi'an Jiaotong University,Xi'an Shanxi 710049,China);Review of the Reactive Mechanism in Mechanical Alloying[J];Heat Treatment of Metals;2003-06
5 RAN Guang,ZHOU Jing-en,XI Sheng-qi,CAO Li-qiang (School of Material Science and Engineering,Xi'an Jiaotong University,Xi'an Shaanxi 710049,China);Microstructure and Characteristics of the Al-Pb-Si-Sn-Cu Bearing Bush Alloy[J];Heat Treatment of Metals;2004-02
6 RAN Guang,ZHOU Jing-en,XI Sheng-qi,LI Peng-liang (School of Materials Science and Engineering,Xi′an Jiaotong University,Xi′an Shaanxi 710049,China);Study on Phase Transformation and Thermodynamic and Kinetic of Al-Pb Powder During Mechanical Alloying[J];Heat Treatment of Metals;2004-07
7 WANG Jun, AN Jian, YANG Xiao hong, LIU Yong bing, XU De wei (Department of Materials Science and engineering, Nanling Campus of Jilin University,Changchun 130025, China);Tribological Behavior of Hot-extruded Al-Si-Pb Bearing Alloys[J];Tribology;2002-04
8 Ran Guang, Zhang Zhongwu, Zhou jingen (School of Material Science and Engineering, Xi′an Jiaotong University, Xi′an 710049, China);Preparation Technology of Nano Tungsten Based Alloy Block Materials[J];Journal of The Chinese Rare Earth Society;2003-S1
9 Ran Guang *, Zhou Jing′en, Xi Shengqi, Li Pengliang (School of Materials Science and Engineering, Xi′an Jiaotong University, Xi′an 710049, China);Morphology and Size Development of Al-Pb Powders during Mechanical Alloying[J];Chinese Journal of Rare Metals;2004-05
【Secondary References】
Chinese Journal Full-text Database 5 Hits
1 SHUAI Ge-wang,FANG Ping,GUO Zheng-hua,LU Bai-ping(School of Materials and Engineering,Nanchang Hangkong University,Nanchang 330063,China);Aging Treatment of Cu-Fe Supersaturated Solid Solution Prepared by Mechanical Alloying[J];Journal of Materials Engineering;2008-12
2 LI Zhan-tao,LIU Yong,HE Shi-wen,WU Hong,LIU Zu-ming,FANG Jing-hua(State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Preparation of Fe-Co based amorphous alloy by mechanical alloying[J];Materials Science and Engineering of Powder Metallurgy;2007-03
3 RAN Guang,ZHOU Jing-en,XI Sheng-qi(State Key Laboratory for Mechanical Behavior of Materials,School of Materials Science and Engineering,Xi′an Jiaotong University,Xi′an Shaanxi 710049,China);Mechanism of Amorphous Phase Synthesized by Mechanical Alloying[J];Heat Treatment of Metals;2005-11
4 XIA Ji-yong,TANG Mo-tang (College of Metallurgical Science and Engineering,Central South University,Changsha 410083,China);Preparation of nano-sized or ultra-fine bismuth oxide and its future application in flame retardants[J];Modern Chemical Industry;2008-06
5 Zhang Youcha1 He Limin2 Jia Chengchang1 Li Weiguang2(1.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,2.Beijing Institute of Aeronautical Materials,Beijing 100095);Effects of BaF_2/CaF_2 Addition on the Cr_3C_2 Matrix Cermet Coating Prepared by Detonation Gun Spraying[J];Cemented Carbide;2009-03
【Secondary Citations】
Chinese Journal Full-text Database 7 Hits
1 Zhang Tongiun;Li Xingguo;Yang Junyou;Hu Zhenhua Huazhong (Central China University of Science and Technology;Investigation on the Solid-State Transformation of Ti-Al Mixed Powder During Mechanical Alloying[J];Journal of Materials Engineering;1993-12
2 XIAO Ping-an, QU Xuan-hui, LEI Chang-ming, QIN Ming-li, ZHU Bao-jun, GAO Jian-xiang, HUANG Pei-yun(State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China;Department of Automobile and Electro-mechanic Engineering, Changsha Communications University, Changsha 410076, China;School of Materials Science and Engineering, Science and Technology University of Beijing, Beijing 100083, China);Mechanical alloying of hypereutectoid Ti - Cr alloys[J];Material Science and Technology;2002-03
3 Zhang Tongjun;Li Xingguo;Yang Junyou;Hu Zhenhua(Huazhong University of Science and Technology);On the Feature of Lattice Distortion of Hexagonal Phase During Mechanical Alloying[J];MATERIAL SCIENCE AND TECHNOLOGY;1994-03
4 Ouyang Yifang1,2,Zhong Xiaping1,3, Xiao Hongling1, Wu Weiming1(1. Guangxi University, Nanning 530004, China)(2. International Center of Materials Physics, Chinese Academy of Sciences, Shengyang 110016, China)(3. Guilin Institute of Technology, Guilin 541004, China);Progress in Research of Cryomilling[J];Rare Metal Materials and Engineering;2003-06
5 Wang Chengguo,Wu Jun,Liu Yuxian and Yang Junfa(Shandong University of Tehnology,250061);Effect of Process Control Agent on Mechanical Alloying of Fe C Ti Alloy Powder[J];POWDER METALLURGY TECHNOLOGY;1997-04
6 Yang Junyou;;Dept.of Materials Sci.&Eng.,H. U. S.T. , Wuhan 430074,China. Zhang Tongjun;Hu Zhenhua;Cui Kun;The Phase Transformation during Mechanical Alloying of Fe-Ni[J];JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY;1995-12
7 YANG Junyou; WU Jiansheng; ZENG Zhenpeng(The Open Laboratory of Education Ministry for High Temperature Materials and High Temperature Tests,Shanghai Jiaotong University, Shanghai 200030)Correspondent: YANG Junyou, postdoctoral research,Tel: (021)62812440;INVESTIGATION ON THE DEFORMATION AND ENERGY TRANSFER OF POWDERS DURING MECHANICAL ALLOVING[J];ACTA METALLRUGICA SINICA;1998-10
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved