Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Rare Metal Materials and Engineering》 2006-12
Add to Favorite Get Latest Update

The Preparation of PS304 Nonacomposite Powders by High Energy Milling

Guo Yongfeng,Ding Chunhua,Zhang Hongtao,Yang Zhimao,Ding Bingjun(State Key Laboratory for Mechanical Behavior of Material,Xi'an Jiaotong University,Xi'an 710049,China)  
The PS304 powders were prepared by mechanical alloying(MA)using Ni,Cr,Cr2O3,Ag and BaF2/CaF2 powders.The influence of different milling time on powders characteristics was investigated.The results showed that the grain sizes were reduced during mechanical alloying,and the grain sizes of Cr2O3 and Ag were less than 50 nm after 15 h milling.Furthermore,with increase of milling time,the peaks of BaF2/CaF2 in XRD patterns weakened or disappeared,and no new phase was found.So BaF2/CaF2 maybe used to form supersaturated solid solution.EDX analysis showed that the final powder was composite powders.
【Fund】: 国家自然科学基金(50471033)
【CateGory Index】: TB383.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 2 Hits
1 XIA Ji-yong,TANG Mo-tang (College of Metallurgical Science and Engineering,Central South University,Changsha 410083,China);Preparation of nano-sized or ultra-fine bismuth oxide and its future application in flame retardants[J];Modern Chemical Industry;2008-06
2 Zhang Youcha1 He Limin2 Jia Chengchang1 Li Weiguang2(1.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,2.Beijing Institute of Aeronautical Materials,Beijing 100095);Effects of BaF_2/CaF_2 Addition on the Cr_3C_2 Matrix Cermet Coating Prepared by Detonation Gun Spraying[J];Cemented Carbide;2009-03
【Citations】
Chinese Journal Full-text Database 2 Hits
1 Zhang Zhongwu,Zhou Jingen ,Xi Shengqi,Li Pengliang,Zhang Wenxing,Rang guang(Xi’an Jiaotong University,Xi’an 710049,China);Studies on Thermodynamic and Kinetic and Phase Evolution of W-Ni-Fe Powder during Mechanical Alloying[J];Rare Metal Materials and Engineering;2004-10
2 ZHANG Xian sheng 1,RAN Guang 2 (1 Panzhihua Iron and Steel (Group) Corporation Office,Panzhihua Sichuan 617067,China; 2 School of Materials Science and Engineering,Xi'an Jiaotong University,Xi'an Shanxi 710049,China);Review of the Reactive Mechanism in Mechanical Alloying[J];Heat Treatment of Metals;2003-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 DING Yuan–zhu, ZHAO Guo–gang, WANG Zhen–ting (College of Materials Science and Engineering, Heilongjiang Institute of Science and Technology, Harbin 150027);Microstructure and Wear Resistance of in-situ Synthesis ZrC Particulate Reinforced Metal Matrix Composite Coating by Argon Arc Cladding[J];China Surface Engineering;2009-03
2 LEI Ruoshan,WANG Mingpu,GUO Mingxing,LI Zhou,CAO Lingfei,TANG Ning(School of Materials Science and Engineering,Central South University,Changsha 410083);Studies on Cu-Nb Nano-particle Dispersion Strengthened Copper Alloys Prepared by Mechanical Alloying[J];Materials Review;2007-S1
3 Ran Guang, Zhou Jing’en, Xi Shengqi, Wang Yongfang (State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049, China);Study on the Nano-Crystalline and Amorphous Al-Pb Series Powders Synthesized by Mechanical Alloying[J];Rare Metal Materials and Engineering;2005-10
4 XIAO Lai-rong, YI Dan-qing, SONG Cheng, CAI Zhi-gang, XU Liang-liang (School of Materials Science and Engineering, Central South University, Changsha 410083, China);Synthesis of Mo(Si, Al)_2 powders by mechanical alloying[J];Materials Science and Engineering of Powder Metallargy;2005-02
5 Meng Jie~ 1) , Jia Chengchang~ 1) , Wang Kaiming~ 2) 1)(School of Materials Science and Engineering, USTB, Beijing 100083,China) 2)(Department of Physics, Anshan University of Science and Technology, Anshan Liaoning 114044, China);Review of formation of Ni_3Al intermetallics compounds by mechanical alloying[J];Powder Metallurgy Technology;2006-04
6 LIU Xin,XIA Zhi-dong,LEI Yong-ping,SHI Yao-wu(The Key Laboratory of Advanced Functional Material Ministry of Education China, Beijing University of Technology,Beijing 100022,China);Effect of ball milling condition on formation of Sn-0.7Cu alloy[J];Transactions of The China Welding Institution;2005-05
7 CAI Li-fang,ZHANG Yong-zhong,XI Ming-zhe,SHI Li-kai(National Engineering Research Center for Nonferrous Metal Composites,General Research Institute for Nonferrous Metals,Beijing 100088,China);Applications and Development of In-situ Synthesis for Materials Preparation[J];Heat Treatment of Metals;2005-10
8 LI Ai-guo~(1),XIONG Yi-min~(2),XU Li-li~(3)(1.Beijing Research Institute of Mechanical and Electrical Technology,Beijing 100083,China;2.State Key Laboratory for Fabrication and Processing of Non-ferrous Metals,General Research Institute for Non-ferrous Metals,Beijing 100088,China;3.College of Material Science and Engineering,Central South University,Changsha Hu'nan 410083,China);Mechanical Alloying Technology and Its Application in Superfine Crystalline Cemented Carbide Materials[J];Heat Treatment of Metals;2006-10
9 WANG Jun,LI Jia,LI Hong-feng,WEN Yu(School of Materal Science and Engineering,University of Jinan,Jinan 250022,China);Ni-Al-Fe-Nb Powders Preparated by Mechanicalalloyin[J];Journal of University of Jinan(Science and Technology);2008-03
10 LOU Qi,LU Yuxiang(Department of Materials Engineering,China University of Petroleum,Dongying 257061,China);Study on Synthesis Mechanism of Nano-crystalline NiAl by Mechanical Alloying[J];Hot Working Technology;2008-06
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 LONG Yan hui (Chongqing Ploytechnic College,Chongqing 400050,China);Study on the Chromium Carbide Detonation Spray Coatings[J];Surface Technology;2002-02
2 SUN Lu-wei,HE Yong,FU Yun de,Zhang Chong [WT5”HZ][ST5”HZ](Shudu Electronic Powder Material Factory,Chengdu 610063,China) [HT5”SS][WT5”HZ];Study on the nanometre bismuth oxide[J];JOURNAL OF TRANSDUCER TECHNOLOGY;2000-01
3 CHEN Jianlong LUO Yuanxing LIU Xiaohen YANG Xujie LU Ludei WANG Xin (School of Chemical and Engineering of Nanjing University of Science and Technology,Nanjing 210094);Preparation of Nano-Bi_2O_3 by Room-temperature Solid-station Reaction[J];Materials Review;2003-07
4 HE Weiming PAN Qingyi LIU Jianqiang ZHEN Qiang ( College of Materials, Shanghai University, Shanghai, 200072; College of Science, Shanghai University, Shanghai 200436);Progress of Preparation of Ultra-fine Bismuth System Oxide Powder[J];Materials Review;2003-S1
5 Chen Shizhu Yin Zhimin Central South University of Technology, Changsha, 410083;Study on Atomizing Combustion Technique for Preparing Metal Oxide Nanometer Powder[J];MATERIALS SCIENCE AND ENGINEERING;1998-03
6 XIAO Jun1,2, PAN Jing1,2, LIU Xin-cai1 1. Department of Engineering Mechanics and Materials Science, Ningbo University, Ningbo 315211,China; 2. Department of Materials Science and Engineering, Nanchang Institute of Aeronautical Technology, Nanchang 330034, China;High Energy Ball Milling and Its Application in the Preparation of Nanostructural Magnetic Materials[J];Journal of Magnetic Materials and Devices;2005-01
7 ZHENG Bo, PANG Ai-Hong, GU Jian-Sheng*(Department of Chemistry and Chemical Engineering, Suzhou University, Suzhou 215006, China);Synthesis of Ultrafine γ-Bi_2O_3 Powder at Low Temperature[J];Chemical Research In Chinese Universities;2005-04
8 Chen Shizhu; Yin Zhimin(Cenrtal South University of Technology);An Automizing-Combustion Tehnique for Preparing Nanosize Metal-Oxide Powder Rapidly[J];HUNAN NONFERROUS METALS;1998-01
9 SHI Xichang,XIAO Zhengwei,QING Yihong(Central South University,Changsha 410083,China);Preparation of Superfine Bi_2O_3 Powder[J];Hunan Nonferrous Metals;2003-04
10 WU Xiao - Chun TANG Guo - Qing ZHANG Gui - Lan ZOU Bing - Suo YU Bao - Long CHEN Wen - Ju(Institute of Modern Optics, Nankai University, Tianjin, 300071);The Effects of Synthesis Conditions on the Luminescence of Nanometer-sized Bi_2O_3 Organosols[J];Acta Chimica Sinica;1996-02
【Secondary Citations】
Chinese Journal Full-text Database 6 Hits
1 Xiao Pingan 1 ,Qu Xuanhui 2 ,Qin Mingli 2 ,Huang Peiyun 3 (1.Changsha University of Science an d Technology,Changsha 410076 ,Chin a)(2.University of Science and Technology Beijing,Beijing 10008 3,China)(3.State Key Laboratory for Powder Me tallurgy,Central South Un iv ersity,Changsha 410083,China);Influence of Milling Rate and Process Control Agents on Mechanica l Alloying of Ti-26Cr[J];Rare Metal Materials and Engineering;2003-09
2 Zhu Xinkun;Lin Qiushi;Chen Tieli;Cheng Baochang;Cao Jianchun(Kunming University of Science and Technology, Department of Materials Science and Engineering, Kunming 650093);RESEARCH AND PROGRESS IN MECHANICAL ALLOYING[J];POWDER METALLURGY TECHNOLOGY;1999-04
3 Wang Erde, Liu Jinglei, Liu Zuyan (School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001);The Research Progression on the Kinetics of Extension Solid Solubility Induced by Mechanical Alloying[J];Powder Metallurgy Technology;2002-02
4 ZHOU Lanzhang;GUO Jianting;QUAN Mingxiu(Institute of Metal Research,The Chinese Academy of Sciences,Shenyang 110015);FORMATION MECHANISM OF NiAl/TiC NANOCOMPOSITE BY MECHANICAL ALLOYING[J];ACTA METALLRUGICA SINICA;1997-11
5 Wang Jingtang,Shen Tongde;Progress in the Study of Mechanical Alloying[J];Physics;1993-08
6 ZHANG TONGJUN; YANG JUNYOU; ZHANG JIE; CUI KUN(National Laboratary for Die Technology, Huazong University of Science & Technology, Wuhan 430074);THERMODYNAMICS OF MECHANICAL ALLOYED Fe-Ni[J];JOURNAL OF APPLIED SCIENCES;1997-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved