Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Sichuan Ordnance》 2013-12
Add to Favorite Get Latest Update

Design and Optimization of Sheet Part Material Parameters on Numerical Simulation

CHENG Xiao-biao;WU Li-mei;YANG Zhi-gang;LI Jin-yan;Changan Ford Automobile Co.,Ltd;  
Sheet part material parameters play very important roles in part draw forming. Different metal material parameters will affect the forming result. In this paper,all draw forming process of the rail part with the different material parameters was simulated by ETA / Dynaform software. Then,with the orthogonal experiment,optimize material parameters were obtained by comparing the simulation result and influence of forming result by all kinds of the material parameters.
【CateGory Index】: TG386
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 2 Hits
1 Hu Yimin; Lin Zhongqin; Xu Weili; Zhang Weigang; Chen Guanlong (Research Institute of Automotive Engineering, Shanghai Jiao Tong University, Shanghai 200030, China Qin Changdeng; Jiang Haomin ;Guo Ruiquan; Wang Chengpu (Customer Technology Research Cent;ADVXNCES IN DYNAMIC SIMULATION OF STAMPING OF AUTOBODY MNEL[J];ADVANCES IN MECHANICS;2000-02
2 LI Jin-yan FU Jian PENG Bi-you LIN Nan(School of Material Science and Engineering,Xihua University,Chengdu 610039 China);Design and optimization of the equivalent drawbead based on numerical simulation[J];Journal of Plasticity Engineering;2007-05
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 GUO Li1,LI Bo2(1.College of Mechanical and Automotive Engineering;Hunan University,Changsha Hunan 410082;2.College of Electrical and Information Engineering,Hunan University,Changsha Hunan 410082);Advances in Friction Models of Computer Simulation of Stamping of Sheet Metal[J];Journal of Hunan University of Arts and Science(Science and Technology);2007-03
2 XU Wei li 1, LIN Zhong qin 2,LU Jiang xin 1 , WANG Cheng pu 1(1.R&D Center, Baosteel company,Shanghai 200000, China; 2.Research Lab for Automotive engineering, School of mechanical engineering, Shanghai Jiao Tong university, Shanghai 200030, China;Application of dynamic simulation in auto-body panel stamping[J];Material Science and Technology;2001-03
3 LIU Wei,YANG Yu-ying(School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China,);Study on process optimization and objective functions of sheet metal forming based on FEA[J];Materials Science and Technology;2006-02
4 YU Tian-ming1,2,MA Wen-xing1,ZHU Bing-dong2,WANG Chun-yan3,HAN Ying-chun2 (1. Mechanical Engineering School,Jilin University,Changchun 130022,China;2. Automobile Engineering School,Jilin University,Changchun 130022,China; 3.School of Energy and Power Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);Numerical simulation of ultra-thin aluminum-coated steel stamping[J];Forging & Stamping Technology;2009-06
5 PENG Bi-you1,HU Teng1,XIAO Bing1,2,LONG Ling2,YIN Guo-Fu2 (1. School of Materials Science and Engineering,Xihua University,Chengdu 610039,China; 2. School of Manufacturing Science and Engineering,Sichuan University,Chengdu 610065,China);Research on calculation method of the drawbead restraining force based on simulation[J];Forging & Stamping Technology;2009-06
6 WANG Yue,FU Jian,ZHU Mei-yun,PENG Bi-you,LI Shan-qiang(School of Material Science and Engineering,Xihua University,Chengdu 610039,China);Drawing wrinkling analysis and solution of 125 motorcycle tank bottom shell[J];Forging & Stamping Technology;2010-02
7 WANG Wanlu,LIU Quankun,LIU Kesu,WANG Chengyong(School of Material Science and Engineering,Hefei University of Technology,Hefei 230009,Anhui China);Design and Optimization of the C Pillar's Drawbead based on Numerical Simulation[J];China Metal Forming Equipment & Manufacturing Technology;2010-04
8 YIN Yanfei1,WANG Yinlin1,WANG Gengyun1,LI Zhigang1,ZHOU Yiqiu2(1.State Key Lab of Material Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,Hubei China;2.Shanghai Baosight Software Co.,Ltd.,Shanghai 201203,China);The Parametric Design of Draw Bead Process for Automobile Panel[J];China Metal Forming Equipment & Manufacturing Technology;2010-06
9 ZHOU Jie~a,HUA Jun-jie~a,YANG De-sen~a,ZHUANG Yan-yan~b,YI Zong-hua~a(a.College of Material Science and Engineering;b.College of Urban Construction and Environmental Engineering,Chongqing University,Chongqing 400045,P.R.China);Deep drawing simulation for high-strength steel box of controllable drawbead[J];Journal of Chongqing University;2010-06
10 ZHOU Jie,HUA Jun-jie,TIAN Fei,YANG De-sen(College of Materials Science and Engineering,Chongqing University,Chongqing 400044,P.R.China);Effect of controllable drawbead on the formability of high strength steel box[J];Journal of Chongqing University;2011-11
China Proceedings of conference Full-text Database 1 Hits
1 ;The Drawbead's Setting and Numerical Simulation in Automobile Cover Forming Based on Dynaform[A];[C];2009
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Beijing University of Aero & Astro Xu Bingkun\ Shi Fazhong;Establishment and implementation of equivalent drawbead model in sheet metal forming numerical simulation[J];Forging & Stamping Technology;2000-06
2 ZHU Jian-jun,ZHONG Yuan,LIU Bo(School of Measure-control Technology and Communication Engineering,Harbin University of Science and Technology,Harbin 150040,China);Measurement and Assessment Evaluation of the Three-dimensional Surface Topography[J];Journal of Harbin University of Science and Technology;2009-01
3 Hu Yimin ;Shi Xiangchen; Lin Zhongqin(Research Institute of Automotive Engineering, Shanghai Jiao Tong University, Shanghai 200030)Shi Qingzong(Shanghai Volkswagen Automotive Company, Ltd, Shanghai 201805 );Application of Vectorization in Computer Aided Autobody Design Technology[J];CAD/CAM;1998-03
4 Li Guangyao (Reseavrh Institute of Engineering Software,Hunan University,Changsha ,410082,P.R.China);Dynamic explicit finite element analysis for 3D sheet forming processes[J];;1996-03
5 Huo Tongru; Xu Bingye (Tsinghua University, Beijing 100084);CAE SYSTEM FOR SHEET FORMING[J];ADVANCES IN MECHANICS;1996-04
6 Wang Xueheng (Tsinghua University)Chang Liangming (Weapon Ministry);EXACT INTEGRATION OF CONSTITUTIVE EQUATIONS OF KINEMATIC HARDENING MATERIAL AND ITS EXTENDED APPLICATIONS[J];Acta Mechanica Sinica;1986-03
7 HuPing;Lian JiansheandLi Yunxing(Jilin University of Technology, Changchun 130025,China);QUASI-FLOW THEORY OF ELASTIC PLASTIC FINITE DEFORMATION[J];ACTA MECHANICA SINICA;1994-03
8 Zhang Wdgang, Hu Yimin, Chen Guanlong & Lin Zhongqin Shanghai Jiaotong University Huang Hongsheng & Shi Qingzong Shanghai Volkswagen Automotive Company Ltd;A Research on Dynamic Simulation for Stamping Forming of Santana Car's Roof[J];Automotive Engineering;1998-03
9 Zhang Dengye;Development and Prospect of CAD/CAM Technique of Automotive Industry[J];Automobile Technology;1995-08
10 Lin Zhongqin, Zhang Weigang, Bao Youxia, Chen Guanlong School of Mechanical Engineering, Shanghai Jiaotong University, China;Simulation and Experiment Analysis of Stamping Forming Process of Automobile Side Frame[J];JOURNAL OF SHANGHAI JIAOTONG UNIVERSITY;1998-11
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved