Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Northeastern University(Natural Science)》 2005-08
Add to Favorite Get Latest Update

Modification for Theoretical Model of Ground Surface Roughness

XIU Shi-chao, LI Chang-he, CAI Guang-qi ( School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110004, China; Inner Mongolia University for Nationalities, Tongliao 028042, China.  
Most of the theoretic formulas to calculate the ground surface roughness are based on the geometrically generating interaction between grits and workpiece surface. Because of some simplifications especially the premise that the ground surface is formed completely just by cutting process, the effect of plastic upheaval deformation of workpiece surface on surface roughness is overlooked so as to cause the theoretic value of surface roughness to be often smaller than the real value. Analyzes the effect of plastic upheaval deformation on the maximum depth of the valley bottom of roughness profile and gives the plastic coefficients and modifies theoretical formulas of ground surface roughness. Compared with testing results, the calculated results by the formulas involving plastic coefficients are proved more accurate.
【Fund】: 教育部科学技术研究重点项目(104190).
【CateGory Index】: TG580.6
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 XIU Shichao CAI Guangqi (School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004);EDGE GRINDING LAYER MODEL AND PARAMETERS IN QUICK-POINT GRINDING[J];Chinese Journal of Mechanical Engineering;2006-11
2 Ming Xingzu1,Hu Jingming1,Liu Ganhua2(1.School of Mechanical Engineering,Hunnan University of Technology,Zhuzhou Hunan 412008,China;2.School of Mechanical and Electronic Engineering,Jiangxi University of Science and Technology,Ganzhou Jiangxi 341000,China);Research on Surface Roughness for Multi-Axis NC Grinding of Bevel Gearr[J];Journal of Hunan University of Technology;2009-02
3 XIONG Xiaofeng,LI Yuping,ZHOU Liqun;Thermal Deformation Simulation for an Internal Grinding Cirque[J];Modern Machinery;2009-04
4 Ming Xingzu1,2 Yan Hongzhi1 Chen Shuhan1 1.Central South University,Changsha,410083 2.Hunnan Industry University,Zhuzhou,Hunan,412008;Research on Surface Roughness for Multi-axis NC Grinding of Spiral Bevel Gear[J];China Mechanical Engineering;2009-20
【Citations】
Chinese Journal Full-text Database 2 Hits
1 ZHAO Heng-hua, FENG Bao-fu, GAO Guan-bin, CAI Guang-qi(School of Mechanical Engineering & Automation, Northeastern University, S henyang 110004, China. Correspondent: ZHAO Heng-hua,E-mail: zhh?@?lnpu.edu.cn);Application of Ultra-high Speed Grinding Technologies in the Field of the Mechanical Machining[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2003-06
2 Feng Baofu, Zhao Henghua, Cai Guangqi;Experimental study on single-grit high-speed grinding 45 and 20Cr steels[J];Machinery Manufacturing Engineer;2003-11
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 TIAN Ji-hong DENG Yu-ping (Department of Mechanics,Anshan Normal University,Anshan Liaoni ng 114005,China);The Research on Quenching High-speed Steel Processing Method[J];Journal of Anshan Teachers College;2002-01
2 Zang Yong Zou Jiaxiang;Study on the Energetics Parameters in Sawing Process[J];;1988-01
3 TAO Xiaojie, WANG Kaikun, LI Chaorong 1) Deptartment of Precision Instrument, Hefei University of Technology, Hefei 230009,China 2) Material Science and Engineering School, UST Beijing, Beijing 100083, China 3) Hefei Vocational Education Center,Hefei 2033;Research of Grinding Teeth Burn and Crack and Thier Thermal Damage Layer[J];Journal of University of Science and Technology Beijing;2001-05
4 Pang Siqin Yu Qixun (Department of Mechanical Engineering);Wear Cumulation of Carbide Tools Under Varying Cutting Speed Conditions[J];Journal of Beijing Institute of Technology;1991-03
5 Liu Xuejie Yang JianmingDepartment of Mechanical Engineering, UIST Baotou, Baotou 014010, ChinaKeywords machining;dry cutting;enviromental impact;High speed dry cutting[J];JOURNAL OF BAOTOU UNIVERSITY OF IRON AND STEEL TECHNOLOGY;1998-02
6 Zhang Shuren;Influence of Vibration on the Surface Roughness in Turning[J];Journal of Changchun Institute of Optics and Fine Mechanics;1991-01
7 Zang Xinqun;A On-line Intelligent Monitor & Its Application[J];Bearing;1993-07
8 Chen Xiaobo,Zheng Huanwen,Zhang Qingyun;High Speed Grinding to Chill Rolls[J];;1988-03
9 Mao Yining,Wang Wanshan, Shan Ruilan, Wang Bo,Lu Shubin;Experimental Study on Temperature in Belt Grinding[J];;1993-02
10 LI Chang-he, CAI Guang-qi, LI Qi, LIU Feng(School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110004, China.);Generating Mechanism of Surface Morphology Finished by Abrasive Jet with Grinding Wheel as Restraint[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2005-06
China Proceedings of conference Full-text Database 2 Hits
1 ZHAO Heng-hua GAO Xing-jun CAI Guang-qi School of Mechanical Engineering & Automation, Northeastern University, Shenyang School of Mechanical Engineering, Liaoning University of Petroleum & Chemical Technology .Fushun;Study about specific grinding energy of ultra high speed grinding[A];[C];2004
2 Xiu Shichao Li Changhe Cai Guangqi School of Mechanical Engineering and Automation, Northeastern University 110004;Study on the Method of Correcting Formula of Surface Roughness[A];[C];2004
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 LI Xian-fen, SU Yong, CHEN Yi-qing, DING Hou-fu(Heifei University of Technology, Hefei 230009, China);Investigation on impact-corrosion-wear property of two kind of steels[J];Ordnance Material Science and Engineering;2003-03
2 GUO Liang, DING Hou -fu, DU Xiao - dong, YAN Xiao - chong (College of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China);Comparison of corrosive impact abrasion behavior between low carbon high alloy steel and high manganese steel[J];Ordnance Material Science and Engineering;2005-02
3 JIN Xin,ZHANG Zhi-jing(School of Mechanical and Vehicular Engineering,Beijing Institute of Technology, Beijing100081,China);Manufacturing Characteristics Based Numerical Surface Model of Microminiatute Component[J];Journal of Beijing Institute of Technology;2005-03
4 LI Chang-he, CAI Guang-qi, LI Qi, LIU Feng(School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110004, China.);Generating Mechanism of Surface Morphology Finished by Abrasive Jet with Grinding Wheel as Restraint[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2005-06
5 ZHANG Chun~1 WANG Jun~2 1.College of Information Science and Engineering,Yanshan University,Qinghuangdao,Hebei 066004,China; 2.College of Mechanical Engineering,Yanshan University,Qinhuangdao,Hebei 066004,China;Research on simulation of surface geometry characters in ultra-high speed grinding[J];Journal of Yanshan University;2007-05
6 FENG Bao-fu~1, MA Chun-rong~2(1. School of Mechanical Engineering & Automation, Fuzhou University, Fuzhou Fujian 350002,P.R. China; 2.Fushun Higher Vocational Technical Institue, Fushun Liaoning 113006, P.R. China)Received 9 December 2004; revised 10 March 2005; accepted 25 March 2005;Surface Hardness After Grinding for Hardened Bearing Steel[J];;2005-02
7 HAO Da bing 1, JIANG Yan feng 2, HUANG Qing an 3, WANG Wei bo 1 (1.Nanjing Electronic Devices Institute, Nanjing, 210016, China; 2.Key Lab of Field Bus Technology & Automation, North China University of Technology, 100041, China; 3.Microelectro Mechanical System(MEMS) Key Laboratory of Educational Ministry, Southeast University, Nanjing, 210096, China);Stress Model for Surface Roughness of Silicon Anisotropic Etching[J];Optoelecfronic Technology;2003-03
8 Liu Xiaojun et al;Study on Integrated Measurement for Curved Surface Roughness, Waveness and Form Error[J];TOOL ENGINEERING;1997-03
9 Li Bokui Liu Yuanwei;Study of Developing Tendency of Surface Roughness[J];Tool Engineering;2004-01
10 Li Changhe Xiu Shichao Cai Guangqi;Development of Truing/Dressing Technology on Superabrasive Grinding Wheel[J];Tool Engineering;2005-03
【Secondary References】
Chinese Journal Full-text Database 6 Hits
1 Qiu Jian1 Gong Yadong1 Liu Changfu1 Zhang Ye2(1.School of Mechanical Engineering and Automation,Northeastern University,Shenyang 110004,China)(2.Liaohe Oilfield Drilling Production Technology Research Institute,Panjin 124010,China);Effect of several factors on quick-point grinding surface roughness[J];Diamond & Abrasives Engineering;2009-04
2 GENG Zhijie,XIU Shichao;Calculation of Actual Touch Area of Contact Periphery in Quick-Point Grinding[J];Precise Manufacturing & Automation;2008-03
3 ;Study on the influence of wheel periphery grinding parameters on quick-point grinding accuracy[J];Precise Manufacturing & Automation;2008-04
4 Xiu Shichao Gong Yadong Cai GuangqiNortheastern University,Shenyang,110004;Research on Mechanism of Effect on Surface Roughness with Point-grinding Angles in Quick-point Grinding[J];China Mechanical Engineering;2008-16
5 LIU Yujiao,LIU Yueming,GONG Yadong(School of Mechanical Engineering&Automatic,Northeast University,Shenyang 110004,CHN);Research on the Geometrical Parameter In Super-high Speed Point Grinding[J];Manufacturing Technology & Machine Tool;2009-05
6 LIU Yueming,GONG Yadong,QIU Jian(School of Mechanical Engineering & Automatic,Northeast University,Shenyang 110004,CHN);The Residual Stress Affected by Machining Velocity in Super-high Point-grinding[J];Manufacturing Technology & Machine Tool;2009-07
【Secondary Citations】
Chinese Journal Full-text Database 7 Hits
1 FENG Bao fu, ZHAO Heng hua, CAI Guang qi, JIN Tan (School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110004, China.;Study on the Single Grain High-Speed Grinding Mechanism[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2002-05
2 CHEN Gen yu , ZHUO Zhi xiong , LI Li jun (College of Mechanical and Automotive Engineering,Hunan Univ,Changsha 410082,China);Optimization on Technological Parameters for High Speed,High Efficiency and Low Roughness Grinding[J];JOURNAL OF HUNAN UNIVERSITY(NATURNAL SCIENCE);2000-03
3 Song Guiliang et al;Design and Manufacturing Procedure of 200m/s CBN Electroplated Ultra-high Speed Crinding Wheel[J];DIAMAVD & ABRASIVES ENGWEERING;2000-01
4 by LIANG Jie et al;Research on the Micro-topography by means of STM during High-speed Precision Grinding[J];Diamond & Abrasives Engineering;2001-03
5 Feng Bao-fu, CAI Guang-qi, QIU Chang-wu (School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110004, China);Development and Key Technologies of Ultra-high Speed Grinding[J];Mechanical Engineer;2002-01
6 Shandong Institute of Light Industry Song Guiliang Northeastern University Cai Guangqi;Experimental Research on Ultra-high Speed Grinding with Single CBN Abrasive[J];NEW TECHNOLOGY & NEW PROCESS;2000-07
7 Liao Lan □Liu Fei,Yin Chao;Study of green properties for high-speed and super high-speed grinding[J];Machinery Manufacturing Engineer;2001-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved