Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Northeastern University(Natural Science)》 2012-04
Add to Favorite Get Latest Update

Dynamic Characteristics Analysis Based on Finite Element for Automotive Transmission Coupling System

YU Yin-xin1,YUAN Hui-qun2,ZHANG Liang1,LU Bing-wu3(1.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110819,China;2.School of Sciences,Northeastern University,Shenyang 110819,China;3.Technology Center,China FAW Group Corporation,Changchun 130011,China.)  
The finite element solid model of transmission was established by using the mixed finite element method of three-dimensional solid,spring-damper and coupling matrix elements,and the modal analysis of the transmission drive system and assembly was done below the third gear.The dynamic responses of the gear transmission system were computed under gear tooth time-varying stiffness,impact and manufacturing error excitations.The results showed that the transmission did not produce resonances under the specific condition of the third gear.There were many frequency components,such as fractional,double and modulation frequencies.The vibration responses displayed multi-period nonlinear characteristics.The research results may make a good foundation for the noise analysis and optimum design of the transmission.
【Fund】: 国家自然科学基金资助项目(50775028)
【CateGory Index】: U463.212
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 3 Hits
1 ZHANG Yu-bai1,YUAN Hui-qun2,YU Yin-xin1,ZHANG Kai-feng1(1.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110819,China;2.School of Sciences,Northeastern University,Shenyang 110819,China.);Vibration Noise Analysis of Transmission Based on Explicit Dynamics[J];Journal of Northeastern University(Natural Science);2013-08
2 ZHANG Yu-bai;YUAN Hui-qun;LIANG Ming-xuan;CAI Ying-ying;School of Mechanical Engineering &Automation,Northeastern University;School of Sciences,Northeastern University;School of Civil Engineering and Mechanics,Huazhong University of Science &Technology;;Impact of workingcondition parameters on dynamic performance of marine helical gears[J];Chinese Journal of Construction Machinery;2013-05
3 Hong Liang;Liu Chengwu;Huang Jian;Han Li;College of Mechanical and Automotive Engineering,Fujian University of Technology;;Analysis of dynamic characteristics and strength of a heavy commercial vehicle transmission case[J];Journal of Fujian University of Technology;2013-06
【Citations】
Chinese Journal Full-text Database 2 Hits
1 WANG Gang, GUO Mao lin (Dept. of Astronautics and Mechanics, Harbin Institute of Technology, Harbin 150001, China);Stiffness of aerospace rolling bearings[J];Journal of Harbin Institute of Technology;2001-05
2 TANG Jin-yuan1, LIU Xin1, DAI Jin1,2(1. School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China;2. Hunan University of Technology, Zhuzhou 412000, China);STUDY ON CORNER CONTACT SHOCK OF GEAR TRANSMISSION BY ANSYS/LS-DYNA SOFTWARE[J];Journal of Vibration and Shock;2007-09
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIN Teng-jiao,YANG Yan-ni,LI Run-fang,LI Ying-chao (State Key Laboratory of Mechanical Transmission,Chongqing Univercity,Chongqing 400030,P.R.China);Numerical simulation of the internal dynamic excitation of a spiral bevel gear transmission[J];Journal of Chongqing University;2009-06
2 BAI Hong-jin1,ZHANG Jin-mei1,YAO Jian-hao2(1.Jiaxing Vocational Technical College,Jiaxing Zhejiang 314036,China;2.Jiaxing Machinery Research Institute,Jiaxing Zhejiang 314001,China);Gear Noise Analysis and Noise Reduction Design[J];Equipment Manufacturing Technology;2010-01
3 ZHOU Jia-wei1,LIU Yu1,LIU Song-yong2,DU Chang-long2(1.School of Mechanical and Power Engineering,Henan Polytechnic University,Jiaozuo 454000,China; 2.School of Mechanical and Electrical Engineering,China University of Mining and Technology,Xuzhou 221008,China);Characteristic analysis of dynamic meshing for shearer walking mechanism[J];Chinese Journal of Engineering Design;2013-03
4 ZHANG Yu-bai1,YUAN Hui-qun2,YU Yin-xin1,ZHANG Kai-feng1(1.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110819,China;2.School of Sciences,Northeastern University,Shenyang 110819,China.);Vibration Noise Analysis of Transmission Based on Explicit Dynamics[J];Journal of Northeastern University(Natural Science);2013-08
5 Yue Jidong;Li Wenchao;Li Jianhua;Deng Sier;Han Tao;School of Mechatronics Engineering,Henan University of Science and Technology;Luoyang Bearing Science and Technology Co. ,Ltd.;;Stiffness Calculation of Four-Point Contact Ball Bearings with Negative Clearance[J];Bearing;2014-04
6 WU Fuzhong(School of Engineering,Shaoxing College of Arts and Sciences,Shaoxing Zhejiang 312000,China);Mechanical Characteristics Analysis of NC Lathe Spindle by FEM[J];Machine Tool & Hydraulics;2009-06
7 Dai Jin, Lu Yanfeng, Tang Jinyuan;Low Noise Gear Design based on a Genetic Algorithem[J];Journal of Mechanical Transmission;2007-06
8 He Jingchang,He Guojun;Stress Analysis on the Parallel Conjugate Cam Mechanism based on ANSYS/LS-DINA[J];Journal of Mechanical Transmission;2009-06
9 Xue Qiang Li Shunde Feng Guangbin(Ordnance Technical Institution,Ordnance Engineering College,Shijiazhuang 050003,China);Finite Element Modal Analysis of Coupled Vibration for Test Stand Gearbox System[J];Journal of Mechanical Transmission;2010-09
10 Sun Huagang1,2 Feng Guangbin1 Cao Dengqing2 Mao Xiangdong1(1 General Armament Department Ordnance Technical Institute,Shijiazhuang 050000,China)(2 School of Astronautics,Harbin Institute of Technology,Harbin 150001,China);Analysis on the Internal Dynamics Excitation of Gear Mesh with the Crack Fault[J];Journal of Mechanical Transmission;2010-10
【Co-references】
Chinese Journal Full-text Database 9 Hits
1 LI Chang,HAN Xing(School of Mechanical Engineering and Automation,University of Science and Technology Liaoning,Anshan 114051,Liaoning,China);Digital Finite Element Simulation of Gear Box Based on Explicit Dynamics[J];Acta Armamentarii;2009-07
2 ZHU Cai-chao,LU Bo,XU Xiang-yang,WANG Hai-xia(State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400030,China);Analysis of coupling characteristic of transmission and structure system of large-power marine gearbox[J];Journal of Ship Mechanics;2011-11
3 LIN Teng-jiao,LIAO Yong-jun,LI Run-fang,LIU Wen(State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400030,P.R.China);Numerical simulation of dynamic response and radiation noise of gearbox[J];Journal of Chongqing University;2009-08
4 HU Zong-cheng1,WANG Juan2,WANG Jun2,YAO Shi-wei2(1.The Navy Military Representative Department Resident in No.431 Plant,Huludao125004,China;2.Wuhan Second Ship Design and Research Institute,Wuhan430064,China);Analysis of the dynamic concussion influence to the high-power speed reducer of marine[J];Ship Science and Technology;2008-04
5 GU Xiang-zhong(Jiangsu Youyi Automobile Go.,Ltd,Zhangjiagang 215622,China);Modal Analysis of Body Frame Structure for ZGT6739DS City Bus[J];Bus & Coach Technology and Research;2012-05
6 ZHOU Jin,HU Shu-gen,SONG Xiao-wen,HONG Biao(Department of Energy Engineering, Zhejiang University, Hangzhou 310027,China);Analysis for the Dynamic Characteristic of the Gearbox[J];Light Industry Machinery;2010-04
7 LIN Teng-jiao, JIANG Ren-ke, LI Run-fang, LIU Wen(Slate Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China);NUMERICAL SIMULATION OF DYNAMIC RESPONSE AND SHOCK RESISTANCE OF MARINE GEARBOX[J];Journal of Vibration and Shock;2007-12
8 LIN Long1,LI Hong-yun2,CHEN Da-yue1(1.Department of Instrumentation Engineering,Shanghai JiaoTong University,Shanghai 200240,China;2.Department of Engineering Mechanics,Shanghai Jiaotong University,Shanghai 200030,China);Calculation and Analysis of Vibration and Noise of Subway Gear Box[J];Noise and Vibration Control;2007-02
9 Min Haitao Gao Juan Ma Tianfei State Key Laboratory of Automobile Simulation and Control,Jilin University,Changchun,130025;Structure Strength Analysis and Optimal Design for Automotive Gearbox Housing[J];China Mechanical Engineering;2012-20
【Secondary Citations】
Chinese Journal Full-text Database 6 Hits
1 Cui Sheng; Xu Genfa; Xia Songbo (Dept. of Power Engineering,HIT);Application of Evolution Equations Methods in Solving Nonlinear Bifurcation Problems for Rotor-Bearing System[J];Journal of Harbin Institute of Technology;1999-02
2 JIAO Ying-hou; CHEN Zhao-bo; XIA Song-bo; LIU Yong-guang (Dept. of Power Engineering, Harbin Institute of Technology, Harbin 150001, China);Analysis for nonlinear instability factor of rotor-bearing System[J];JOURNAL OF HARBIN INSTITUTE OF TECHNOLOGY;1999-04
3 HE Li-dong; XLA Song-bo; LI Yan-tao; WEN Xue-you (Dept. of Power Engineering, Harbin Institute of Technology, Harbin 150001, China; 2. Harbin 703 Institute, Harbin 150036,China);Study on the mechanism of nonlinear vibration of rotor/bearing system[J];JOURNAL OF HARBIN INSTITUTE OF TECHNOLOGY;1999-04
4 LI Bing, WANG Zhi xing, LI Jian sheng (Dept. of Mechanical Engineering, Harbin Institute of Technology, Harbin 150001, China);Dynamics of a new parallel machine tool[J];JOURNAL OF HARBIN INSTITUTE OF TECHNOLOGY;1999-06
5 WANG Yu, WANG Tao, MA Yu lin (Dept. of Mechanical Engineering, Harbin Institute of Technology, Harbin 150001, China);Two-row inner restrictor hydrostatic bearing without oil back curve[J];JOURNAL OF HARBIN INSTITUTE OF TECHNOLOGY;2000-03
6 WU Bao-lin1,YANG Su-jun1,YAO Jun-hong2 ( 1 Tianjin Polytechnic University,Tianjin 300160; 2 Dezhou Institute of Technology, Dezhou 253015);Theoretical Analysis on Meshing Impact of Involute Gears[J];Mechanical Science and Technology;2003-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved