Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Northeast Forestry University》 2011-08
Add to Favorite Get Latest Update

Development of Mountain Self-Elevating Seed Harvesting Machine

Wu Hao,Dong Xibin(School of Engineering and Technology,Northeast Forestry University,Harbin 150040,P.R.China)  
The main performance parameters of seed harvesting machine were selected according to the requirements of tree seed harvesting and the characteristics of mechanical equipment under mountain conditions.A mountain self-elevating seed harvesting machine was developed based on the mechanical principles,spatial mechanism,mechanical kinematics and virtual prototyping technology.The performance parameters of the seed harvesting machine were comprehensively tested by the physical prototype.Results show that the design of the seed harvesting machine with good performance is reasonable,which could meet the operational requirements of seed harvesting in plantations or seed orchards and adapt well to the mountainous environment.
【Fund】: 黑龙江省科技攻关项目(GA09B204-03)
【CateGory Index】: S776.222
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 4 Hits
1 $$$$Wang Xiping( College of Forest Products and Engineering,BFU );Analysis of Mechanical Harvesting Techniques of Forest Seed[J];JOURNAL OF BEIJING FORESTRY UNIVERSITY;1994-02
2 Wu Hao,Dong Xibin(College of Engineering and Technology,Northeast Forestry University,Harbin 150040,P.R.China);Li Jinpeng(Chery Automobile Co.,Ltd.);Wang Yaqiong(Sichuan Normal University);Virtual Design for Self-elevating Seed Collecting Machine Based on UG[J];Journal of Northeast Forestry University;2010-02
3 Kong Qinghua, Ge Anhua, Lu Huaimin, Li Zhengyi (Northeast Forestry University, Harbin 150040, China)//;Kinematics Analysis of Manipulator of Cone Collecting Robot in Rising[J];JOURNAL OF NORTHEAST FORESTRY UNIVERSIYT;1997-01
4 Lu Huaimin (Northeast Forestry University);Design and Test of Collecting Robot of Conifer Cone[J];Transactions of The Chinese Society of Agricultural Machinery;2001-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIU Chang-lin et al (Chinese Agricultural University,Beijing 100083);Research Progress on Picking Robot for Fruits and Vegetables[J];Journal of Anhui Agricultural Sciences;2008-13
2 WANG Hui et al(Modern Education and Technology Center,Agricultural University of Hebei,Baoding,Hebei 071001);Preliminary Study on Application Progress of Agricultural Robot[J];Journal of Anhui Agricultural Sciences;2009-16
3 Cui Xueliang Han Xianguo Chen Wuyi(School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Continuous stiffness modeling of 3-RPS parallel kinematic machine with special composite spherical joints[J];Journal of Beijing University of Aeronautics and Astronautics;2010-11
4 WANG Yao-ting,MA Xue-mei,CHEN An-jun(Jiangnan University,Wuxi 214122,China);Kinematics Analysis of 3-PPRR Translational Sorting Parallel Robot[J];Packaging Engineering;2010-19
5 CHEN Li,ZHANG Hong-li(Electric Engineering Academy,Xinjiang University,Urmuq 830047,China);Application of Particle Swarm Optimization on Direct Kinematics of 6-SPS Parallel Manipulators[J];Journal of Chongqing University of Technology(Natural Science);2010-08
6 LI Bing,ZHANG Yu,XIE Li-yang,WEI Yu-lan(School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004,China. );Dynamic Analysis of a 3-DOF Parallel Manipulator[J];Journal of Northeastern University(Natural Science);2010-11
7 Jiang Shuhai(Institute of Intelligent Control and Robotic Technology,Nanjing Forestry University,Nanjing 210037,P.R.China);Development Status of Forestry Robot[J];Journal of Northeast Forestry University;2009-12
8 Wu Hao,Dong Xibin(College of Engineering and Technology,Northeast Forestry University,Harbin 150040,P.R.China);Li Jinpeng(Chery Automobile Co.,Ltd.);Wang Yaqiong(Sichuan Normal University);Virtual Design for Self-elevating Seed Collecting Machine Based on UG[J];Journal of Northeast Forestry University;2010-02
9 Kong Qinghua, Lu Huaimin, Wang Shouzhong(Northeast Forestry University, Harbin, 150040 P. R. China);Design of RBT14-Cone Collecting Machine[J];JOURNAL OF NORTHEAST FORESTRY UNIVERSIYT;1997-06
10 ZHAO Yan 1 , HUANG Zhen 1 (1. College of Mechanical Engineering, Yanshan University, Qinhuangdao, Hebei 066004, China);Analysis of active forces and constraint reactions of 3-RPS parallel manipulator[J];Journal of Yanshan University;2008-04
China Proceedings of conference Full-text Database 3 Hits
1 Ting-Li Yang (SINOPIC Jinling Petrochemical Corp.) Yu-Feng Luo (Nanchang University);Fundamental Equations for Topological Design of Robot Mechanisms and Its Application[A];[C];2007
2 Dong Xibin ,wu Hao (Northeast Forestry University,Harbin 150040);The Virtual Design and Research for self dyadic promotion and demotion seed collecting machine based on UG[A];[C];2009
3 Xiao Fuqin1,Wang Zhisheng2 1) Automation College,Nanjing University of Aeronautics and Astronautics,Nanjing,China 2) Automation College,Nanjing University of Aeronautics and Astronautics,Nanjing,China;A method for degree of freedom of parallel mechanism analysis based on screw coordinate transformation[A];[C];2010
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 $$$$Wang Xiping( College of Forest Products and Engineering,BFU );Analysis of Mechanical Harvesting Techniques of Forest Seed[J];JOURNAL OF BEIJING FORESTRY UNIVERSITY;1994-02
2 Min Chen et al.;Kinematic analysis of working equipment on hydraulic excavator with swivel backet arm[J];Construction Machinery and Equipment;1996-10
3 ;A study in the operation balance of mini-trencher[J];CONSTRUCTION MACHINERY AND EQUIPMENT;1997-09
4 Fang LiangZhou et al.;Simulation of the Working Equipment of Hydraulic Excavator[J];CONSTRUCTION MACHINERY AND EQUIPMENT;1998-08
5 Lian Jinyi;Analysis Method for the System Reliability of the Overall Machine of Construction Machinery[J];CONSTRUCTION MACHINERY AND EQUIPMENT;1998-08
6 Kong qinghua;Design of Hydraulic System for Stump Cutter Robot[J];CONSTRUCTION MACHINERY AND EQUIPMENT;1999-12
7 ;Kinematic Simulation of Backhoe Attachment on Hydraulic Excavator[J];Construction Machinery and Equipment;2000-10
8 Kong Qinghua Liu Jinhao Gu Lisuang (Northeast Forestry University,Harbin,150040);KINEMATICS ANALYSIS OF MANIPULATOR OF THE ELIMINATING ROOTS ROBOT[J];JOURNAL OF JIAMUSI UNIVERSITY(NATURAL SCIENCE EDITION);1999-04
9 Wu Gang; DongJinxiang; Ge Jianxin (Zhejiang University Artificial Intelligence Research Institute Hangzhou 310027);A MODEL FOR AUTOMATICALLY CONSTRUCTTNG USER INTERFACE[J];JOURAAL OF COMPUTER AIDED DESIGN & COMPUTER GRAPHICS;1994-01
10 Pan Jingui;Zhang Jianwei and Chen Shifu(Department of Computer Science,Nanjing University,Nanjing 210093);THE DESIGN AND IMPLEMENTATION OF THE OBJECT-ORIENTED USER INTERFACE MANAGEMENT SYSTEM──NDUIMS[J];CHINESE JOURNAL OF COMPUTERS;1995-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved