Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Yanshan University》 2013-06
Add to Favorite Get Latest Update

Research on hydrogen pressure field of micropores in heavy forgings

DU Feng-shan;LI Jie;FAN Jun-kai;HUANG Hua-gui;LI Yuan;National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University;National Laboratory of Metastable Materials Science & Technology, Yanshan University;  
A micropore hydrogen concentration calculation model is established based on the gas sate equation combined with the original micropore hydrogen pressure calculation model. A complex calculation model of micropore hydrogen pressure is given. The micropore defects in heavy forgings can be treated as porous compressible material due to the similar physical property and deformation characteristics.In light of the forging process of large Cr5 forgings,a non-linear FEA model is proposed for the compaction process of micropore defects and calculation of micropore hydrogen pressure using the rigid-plastic finite element method for compressible material in this paper. By means of numerical simulation, the influence on the reduction of the relative density and micropore hydrogen pressure is discussed. The results show that 1. the relative density of forgings increases with the enhancement of reduction; 2. there is a threshold concerning the effect of relative density on the micropore hydrogen pressure. The micropore hydrogen pressure can be effectively regulated by controlling the forgings reduction.
【Fund】: 国家自然科学基金资助项目(51075352 51005197)
【CateGory Index】: TG316.192
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 1 Hits
1 XIANG Wei,LIU Jian-sheng,AN Hong-ping,GUO Gai-li(College of Materials Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China);FEM Simulation Optimization of Loosen Structure Compaction with FM Method Based on Orthogonal Experimental Design[J];Journal of Taiyuan University of Science and Technology;2010-05
Chinese Journal Full-text Database 10 Hits
1 LI Shu-mei (Vehicle Engineering Institute,Inner Mongolia No.1 Machinery Manufacture(Group) Co.,Ltd., Baotou 014032,Inner Mongolia);Analysis on Cracking of Brake Beam[J];Heat Treatment;2010-03
2 Li YanruTaiyuan Iron &Steel(Group)Co.Ltd.;the Reasons and the Prevention of Cr12 Series Steels Internal Cracks Caused During Forging[J];Shanxi Metallurgy;2004-01
3 YUE Jun,LI Na(Chengdu Aircraft Industria(lGroup)Corporation,Chengdu 610092,China);Fatigue feature of chemical milling on aluminium alloy[J];China Measurement & Test;2009-04
4 Engineer  Qiu Sixiao(Fushun Petroleum Institute,Fushun 113001);Study on the malfunction mechanism of broken hangstick of cyclone separator[J];PETRO-CHEMICAL EQUIPMENT;1998-04
5 LI Zhen-yan,AN Hong-ping,CHEN Hui-qin(School of Material Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China);Numerical Simulation of Porosity Defects in Large Forging Steel Ingots[J];Journal of Taiyuan University of Science and Technology;2012-04
6 ZHOU Ruitao1,GONG Yulong1,ZHENG Weigang2(1.School of Energy and Power Engineering,Wuhan University of Technology,Wuhan 460063,China;2.Engineering Training Center,Wuhan University of Technology,Wuhan 460063,China);Analysis of Deformation Resistance on 42CrMo Steel Roughing Roll and Research on Improved Process Method[J];Hot Working Technology;2013-15
8 Wu Wenbing;Investigation on Eched Spot and Microcracks of Electroplate Surface[J];Journal of Zhejiang University;1986-01
9 LI Zhen-yan,CHEN Hui-qin(School of Material Science and Engineering,Taiyuan University of Science and Technology,Taiyuan Shanxi 030024,China);Numerical Simulation of Porosity Defects in 55-ton Steel Ingots for Large Forgings[J];Foundry Equipment and Technology;2012-05
10 Du Fengshan1,2 Fan Junkai1 Huang Huagui1 Li Jie1 Li Yuan1 1.Yanshan University,Qinhuangdao,Hebei,066004 2.Laboratory of Metastable Materials Science & Technology, Qinhuangdao,Hebei,066004;Infuluence of Micropores and Crack's Hydrogen Induced Stress Coupling Effect on Crack Growth in Heavy Forging[J];China Mechanical Engineering;2013-14
China Proceedings of conference Full-text Database 2 Hits
1 ZHANG De-mei YE Jian-ping (Chongqing Machinery Industry Physical and Chemical Measurement Center,Chongqing 400020,China);Fracture Analysis of the CA50003FA1 Adjusting Screw[A];[C];2007
2 LI Shu-mei (The Metering and Testing Institute of Inner Mongolia First Machinery(Group) Co.,Ltd.,Baotou 014030,China);Fracture Analysis of Automotive Diesel Engine Crankshaft[A];[C];2009
【Secondary Citations】
Chinese Journal Full-text Database 7 Hits
1 MA Qingxian, ZHONG Yuexian, CAO Qixiang Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China;Principle of internal defects recovery in processes of high temperature plastic deformation[J];JOURNAL OF TSINGHUA UNIVERSITY(SCIENCE AND TECHNOLOGY);1999-11
2 CUI Zhenshan1, REN Guangsheng2, XU Bingye1, XU Chunguo2, LIU Guihua2(1. Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China;2. Beijing Research Institute of Mechanical and Electrical Technology, Beijing 100083, China);Void closing conditions for solid cylinders during hot forging[J];Journal of Tsinghua University(Science and Technology);2003-02
3 CUI Zhen\|shan 1 Xu Bing ye 3 (Department of Engineering Mechanics,Tsinghua University,Beijing 100084) REN Guang\|sheng 2 XU Chun\|guo 4 LIU Gui\|hua 5 (Beijing Research Institute of Mechanical and Electrical Technology,Beijing 100083);Numerical simulation of Fore closure in solid cylinder under hot forging[J];Journal of Plasticity Engineering;2002-01
4 CUI Zhen-shan 1 XU Bing-ye 3 (Department of Engineering Mechanics,Tsinghua University,Beijing 100084) REN Guang-sheng 2 XU Chun-guo 4 LIU Gui-hua 5 (Beijing Research Institute of Mechanical and Electrical Technology,Beijing 100083);A study of critical reduction for closing pores in heavy forgings[J];Journal of Plasticity Engineering;2002-03
5 ZHOU Ming-zhi LI Ping XUE Ke-min (School of Material Science and Engineer,Hefei University of Technology,Hefei 230009 China);Coupled thermo-mechanical FEM analysis of the sintered powder during upsetting process[J];Journal of Plasticity Engineering;2005-06
6 YUAN Chao-long ZHONG Yue-xian(Department of Mechanical Engineering,Key lab of AMMPT,Tsinghua University,Beijing 100084 China);Self-healing mechanism of inner crack in plastic deformation under high temperature[J];Journal of Plasticity Engineering;2006-01
7 HUA Lin 1,2 ,QIN Xun-peng 1 (1.School of Materials Science and Engineering, WUT, Wuhan 430070, China; 2.State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology, HUST, Wuhan 430074, China);Research and Progress of Yield Criterion for Sintered Powder Materials[J];Journal of Wuhan University of Technology;2004-04
Similar Journals
> Cfhi Technology
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved