Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Dalian University of Technology》 2003-05
Add to Favorite Get Latest Update

Application of cracked beam element to analysis of cracked crankshaft

LEIXuanyang*,SONGXigeng( Res. Inst. of Intern. Combust. Engine, Dalian Univ. of Technol., Dalian 116024, China )  
The variation of the vibration behavior of the crankshaft due to the crack is investigated. Aiming at the ordinary state of the crack, the method for calculating element stiffness matrix of a rectangular section spatial beam with a transverse crack is proposed. First, the cracked beam element is verified by analyzing the modal of a cracked cantilever beam, and then applied to simulate the crack presented at inner corner of crankshaft. Based on these, the finite element model of a cracked fourinline crankshaft is presented, and modal and dynamic responses with various crack depths are analyzed. All of these are acted as the cornerstone for inspecting the crack in the crankshaft by vibration analysis.
【Fund】: 大连市科学技术基金资助项目(2000).
【CateGory Index】: TQ320
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 Zhao Feng,Jia Mingyin,Xue Ping,Cai Jianchen (School of Mechanical and Electrical Engineering,Beijing University of Chemical Technology,Beijing100029,China)Sun Zhiqiang (Beijing Heng Tong Chuang Xin LUX Wood Co.Ltd.,Beijing102401,China);DIE RUNNERS DESIGN OF WPC CONSTRUCTION WALLBOARD PROFILES BASED ON POLYFLOW SIMULATION[J];Engineering Plastics Application;2011-06
2 LUO Wu1,2,LIU Bin2(1.Guangzhou Institute of Railway Technology,Guangzhou,Guangdong 510430,China;2.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou,Guangdong 510640,China);Intelligent parametric design of extrusion die for pipe product based on UG[J];Die & Mould Industry;2008-08
3 Zhao Danyang Wang Minjie Song Mancang Liu Zhiming Yu Qing'an(Dalian University of Technology);Manufacturing Technology of Plastic Profile Extrusion Die Based on Surface Reconstruction[J];Transactions of the Chinese Society for Agricultural Machinery;2006-07
4 ZHAO Feng1,XUE Ping1,MIAO Lirong1,LIU Tiantao1,FANG Xiaozhong2(1.School of Mechanical and Electrical Engineering,Beijing University of Chemical Technology,Beijing 100029,China;2.Anhui Guofeng Wood-plastic Composite Co,Ltd,Hefei 230011,China);Design Method of Die Runners for WPC Profiles Based on Numerical Simulation and Orthogonal Test[J];China Plastics;2010-10
【Citations】
Chinese Journal Full-text Database 3 Hits
1 Wang Zhongjun Chen Dingfang (Wuhan Transpotation University, Wuhan, 430063) Yang Anchang (No. 716 Research Institute of CSSC, Wuhan, 430000);Study on Intelligent CAD System for Plastic Profile Extrusion Die[J];COMPUTER AIDED ENGINEERING;1997-02
2 Luo Zhigao Shi Minghong (Jiangsu University of Science & Technology);RESEARCH ON DRAWING BASE OF COOLING METHODS IN INJECTION MOULD BASED ON KNOWLEDGE[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;2000-03
3 ZHOU Xiong hui, LI Xiang, XIONG Pei you (Dept. of Plasticity Forming Eng., Shanghai Jiaotong Univ., Shanghai 200030, China);Knowledge-Based Concurrent Engineering System Method for Die and Mold[J];Journal of Shanghai Jiaotong University;2001-07
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Yan Siyu, Gong Zhiqiang (Zhuzhou Electric Locomotive Research Institute,Zhuzhou 412001 , China) Jie Xiaoping (Mechanical and Electronic Engineering School, Nanchang University, Nanchang 330029, China);A METHOD OF AUTOMATIC GENERATION OF FEATURE-BASED INJECTION MOULD CORE & CAVITY[J];Engineering Plastics Application;2003-11
2 LI Jian-cheng(College of Architecture & Civil Engineering,South China University of Technology,Guangzhou510641,China);On standardization of information technology in AEC/FM industry[J];Building Science Research of Sichuan;2004-04
3 WANG Tai-ping~1,SUN ping~1,Wang Li-tao~1,LIU Xiao-ping~2,WU Yi-can~2(1. Anhui Engineering Science and Technology College, 241000 Wuhu, China; 2. Institute of Plasma Physics, the Chinese Academy of Sciences, Hefei 230031, China);Research on Technology of Blanket Info-modeling and Info-integrating of Fusion Reactor[J];Journal of Anqing Teachers College(Natural Science Edition);2005-02
4 JIA Yun(Ahhui Technical College of Water Resources and Hydroelectric Power, Hefei 230601, China);On the teaching reform of the Mechanical Drawing Course[J];Journal of Anhui Technical College of Water Resources and Hydroelectric Power;2004-04
5 WANG Da-kang, LIU Jian, SHI Ya-ning( College of Mechanical Engineering and Applied Electronics Technology,Beijing Polytechnic University, Beijing 100022, China );Study on Expert System for the Scheme Design of Automobile Clutch[J];Journal of Beijing Polytechnic University;2002-04
6 JIA Chun-xiu(Dept.of Spare parts of Equipment,Benxi Steel Co.Ltd,Benxi,Liaoning,117000,China);Assembling Estimate for Products under Subjunctive Environment[J];Journal of Benxi College of Metallurgy;2005-03
7 LEI Gang, ZOU Chang ping (Mechanical Department, Chongqing Institute of technology,Chongqing 400050,China);Product Data Management Resume and Its Trend[J];Packaging Engineering;2001-04
8 by Wang Cailian and Zeng Guangwu;Research on Information-integrated Data Information Model in Modular Design of Ships[J];Ship Engineering;2002-01
9 WAN Su-wen (Huai'an Vocational and Technical School of Information, Huai'an 223001,China);Research on the Integrated Technology of CAX Based on STEP[J];Journal of Chongqing Institute of Technology;2005-03
10 WANG Bao you\+1\ NING Ru xin\+1\ CUI Li hua\+2\;(1.School of Mechanical Engineering & Automation, Beijing Institute of Technology, Beijing 100081; 2.College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic Universi;Product Information Management System Supporting Mass Customization based on Internet[J];Group Technology & Production Modernization;2002-03
China Proceedings of conference Full-text Database 4 Hits
1 Qin XiaoJun Li Yan Li ShuJuan Yuan QiLong (School of Machinery and Precision Instrument Engineering, Xi'an university of technology Xi'an 710048);Integration of CAD/CAPP parts information generation based on STEP[A];[C];2002
2 Li Ganghu Yi Ligang Lu Haibo Sheng Zeyuan(ChangSha University of Science and engineering course,Changsha,410007,China);DESIGN AND REALIZATION OF RELAY PROTECTION DRAWING MANAGE SYSTEM[A];[C];2006
3 Wang Taiping Liu Xiaoping Wu Yican ( Computer College, Hefei University of Technology, Hefei 230009) ( Anhui University of Technology and Science, Wuhu 241000) ( Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031);Research on Blanket Information Modeling of Fusion Reactor[A];[C];2003
4 Sun Yuguo~1 Liu Haijiang~2 (University of Shanghai for Science and Technology, Shanghai 200093, China)~2(Tongji University, Shanghai 200092, China);Tolerance Information Extraction of Engine CAPP System[A];[C];2005
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 LIUBin,WANGMinjie*,LIUYaozhong( Inst. of Mold & Die, Dalian Univ. of Technol., Dalian 116024, China );Numerical analysis of effect of channel structure on plastic extrusion flow[J];Journal of Dalian University of Technology;2003-04
2 Chongqing University Zhou Jie Shen JigangPanzhihua Iron&Steel (Group) CO LTD Zhang Yong Tang Hui Xie Ping;Application of reverse engineering in complex stamping parts and die design[J];Forging & Stamping Technology;2003-02
3 LIU He\|sheng, TU Zhi\|gang\ SUN Yan\|ping\ BAO Zhong\|xu (College of Mechanical & Electronic Engineering,Nanchang University,Nanchang 330029,China);Methods Used to Analyze Polymer Melt Flow in Extrusion Dies[J];Polymer Bulletin;2001-02
4 WANG Ke-jian 1, ZHOU Chi-xing 2 (1.National Key Laboratry of Advanced Composites, BIAM, P.B.81-3,Beijing,100095,China; 2.College of Chemistry and Chemical Engineering, Shanghai Jiaotong University, 200240, China);Z-W Rheological Model for Polymer Melt Considering Wall Slip and its Applications[J];Polymer Bulletin;2003-01
5 Su Guoying, Yang Weimin ,Ding Yumei (Mechanical and Electrical Engineering College,Beijing University of Chemical Technology, Beijing 100029,China);Simulation of pressure distribution in L-shape sheet extrusion die by three-dimensional finite element method[J];China Synthetic Rubber Industry;2001-05
6 Liang Jizhao;Sun Xuelei and Tang Guojun(Department of Chemical Machinery, South China University of Technology, Guangzhou);PRESSURE DROP OF RUBBER COMPOUND DURING CONICAL DIE FLOW[J];CHINA SYNTHETIC RUBBER INDUSTRY;1994-01
7 Liang Jizhao; Tang Guojun; Huang Zecheng (Dept. of Chemical.Machinery, South China Univ. of Tech.);RESEARCH ON THE WALL SLIP BEHAVIOUR OF NR/SBR COMPOUND IN EXTRUSION I. PRESSURE OSCILLATION PHENOMENA[J];JOURNAL OF SOUTH CHINA UNIVERSITY OF TECHNOLOGY(NATURAL SCIENCE);1994-01
8 Zhu Yuan-ji et al(Chemical Materials for Construction 1997. 13. ): 7~8;Development of CAD System of Extrusion die for Plastics Profiles[J];CHEMICAL MATERIALS FOR CONSTRUCTION;1997-01
9 Zhu Yuan-ji ( Hcfci University of Tcchnology );Set-UP of FMC for Extrusion abc of Plastic Profiles[J];CHEMICAL MATERIALS FOR CONSTRUCTION;1998-02
10 Wang Zhongjun Wuhan Transportation University, Wuhan 430063, China. Chen Dingfang Xu Hongyi;Optimal Design of Fluid Channel for Plastic Extrusion Die[J];JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY;1997-11
【Secondary References】
Chinese Journal Full-text Database 2 Hits
1 Zhao Feng,Jia Mingyin,Xue Ping,Cai Jianchen (School of Mechanical and Electrical Engineering,Beijing University of Chemical Technology,Beijing100029,China)Sun Zhiqiang (Beijing Heng Tong Chuang Xin LUX Wood Co.Ltd.,Beijing102401,China);DIE RUNNERS DESIGN OF WPC CONSTRUCTION WALLBOARD PROFILES BASED ON POLYFLOW SIMULATION[J];Engineering Plastics Application;2011-06
2 GONG Wen;Research for the injection mold remanufacturing system model based on reconfigurable manufacturing thinking[J];Manufacturing Automation;2010-03
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 Wang Zhongjun Chen Dingfang Yang Kejian Chao Baoyue (Wuhan Transportation University);Modular Design of Allotype Plastic Profile Extrusion Die[J];;1996-02
2 Wang Zhongjun Chen Dingfang Liu Ying (Wuhan Transportation University Nan Chang Unversity);Pattern Selection of Mold Core in Allotype Plastic Profile Extrusion Die by Using Artificial Neural Networks[J];;1996-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved