Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Dalian University of Technology》 2007-03
Add to Favorite Get Latest Update

Recognition of diamond grains on surface of fine diamond grinding wheel

HUO Feng-wei,JIN Zhu-ji,KANG Ren-ke,GUO Dong-ming,YANG Chun(Key Lab.for Precis.& Non-tradit.Mach.Technol.of Minist.of Edu.,Dalian Univ.of Technol., Dalian 116024,China)  
Accurate evaluation of grinding wheel surface topography is indispensable for the investigation of grinding principle,optimization,modeling and simulation of grinding process,which,to a large extent,depends on accurate recognition of abrasive grains from the measured wheel surface.Detailed analyses of the grain size distribution characteristics and the grain profile wavelength of fine diamond grinding wheel used for ultra-precision grinding are presented.The requirements of spatial sampling interval and sampling area for instruments to measure the surface topography of diamond grinding wheel are discussed.In order to recognize the diamond grains,digital filtering is used to eliminate high frequency noise from the measured 3D digital surface and then the geometric characteristics of diamond grains are extracted.A method based on the grain profile frequency characteristics,the distance between two adjacent diamond grains and the diamond grain curvature is proposed to recognize the diamond grains.A 3D non-contact profiler based on scanning white light interferometry is used to measure the surface topography of a #3000 resin bonded diamond grinding wheel,and then the diamond grains are recognized.The experimental results show that the newly proposed method is reasonable and effective.
【Fund】: 国家自然科学基金资助项目(重大项目50390061);; 国家杰出青年科学基金资助项目(50325518)
【CateGory Index】: TG743
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved