Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Dalian Jiaotong University》 2008-05
Add to Favorite Get Latest Update

Virtual Prototype (VP) Technology and Its Key Technology Connotation of CAE and Model Building

ZHAO Wen-zhong,FANG Ji (School of Traffic and Transportation Engineering,Dalian Jiaotong University,Dalian 116028,China)  
In this paper,the definition and connotation of Virtual Prototype is firstly given,it is proved that shortening the design period and decreasing as large as possible the venture of physical product are total feasible and urgently needed while based on the Virtual Prototype technology.In this paper,it is theoretically addressed that there are some different connotation between performance simulation technology CAE and CAD;simulation technology CAE is able to create more additive value than CAD technology.As performance simulation is the key technology of Virtual Prototype,so the main research direction in this paper is therefore constructed following it.In the last part of this paper classical applied cases and four modeling principles were acquired from engineering practices.
【CateGory Index】: TP391.7
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 ZHANG Jun1,ZHAO Wen-zhong1,LI Yong-hua2,WANG Yue-dong1,WANG Jian1(1.School of Traffic and Transportation Engineering,Dalian Jiaotong University,Dalian 116028,China;2.School of Mechanical Engineering,Dalian Jiaotong Unilersity,Dalian 116028,China);Reasearch on Parameter Modeling for Aluminum Alloy Rail Vehicle Body[J];Journal of Dalian Jiaotong University;2009-04
【Citations】
Chinese Journal Full-text Database 10 Hits
1 Zhao Wen Wang Weiping Zhu Yifan (Department of Systems Engineering and Mathematics, NUDT, Changsha, 410073) Hu Xiaofeng (National Defense University,Beijing, 100000);Towards Technology of Virtual Prototyping in Weapon Systems[J];JOURNAL OF NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY;1999-01
2 WANG Li_quan,WANG Xiao_dong,CHEN De_wang,WEI Hong_xing,MENG Qing_xin (College of Mechanical and Electrical Eng.,Harbin Engineering University,Harbin 150001,China);Study of Control System Simulation Based on Virtual Prototyping[J];Journal of Harbin Engineering University;2000-06
3 DING Yanchuang,ZHAO Wenzhong(School of Mechanical Engineering,Dalian Jiaotong University,Dalian 116028,Liaoning,China);Stiffness coordination strategy for increasing fatigue life and its application in welded structure[J];Transactions of the China Welding Institution;2007-12
4 DING Yanchuang,ZHAO Wenzhong(School of Mechanical Engineering, Dalian Jiaotong University,Dalian 116028,Liaoning,China);Anti-fatigue optimization design of welded structure[J];Transactions of the China Welding Institution;2008-06
5 WANG Dong-ping1, ZHAO Wen-zhong1, SUGIYAMA Hiromu2, TOJO Akira2 (1.College of Mechanical Engineering, Dalian Jiaotong University, Dalian 116028, China) (2. Department of Mechanical Systems Engineering, Muroran Institute of Technology,;Numerical and Experimental Investigations of Mach 4 Pseudo-Shock Waves in a Two-dimensional Square Duct[J];Acta Aeronautica Et Astronautica Sinica;2005-04
6 Wei Youshuang Wang Fei Feng Yuncheng (Beijing University of Aeronautics and Astronautics, School of Management,100080);System Simulation, Multimedia and Virtual Reality[J];COMPUTER SIMULATION;1999-02
7 WANG Dong-ping~1,ZHAO Wen-zhong~1,SUGIYAMA Hiromu~2,TOJO Akira~2(1.Department of Mechanical Engineering,Dalian jiaotong university,Dalian 116028,China;2.Department of Mechanical Systems Engineering,Muroran Institute of Technology, Muroran,Hokkaido 050-8585,Japan);Study on Mach 4 internal flow with pseudo-shock waves using liquid crystal visualization method[J];Acta Aerodynamica Sinica;2005-04
8 LI Xiao-feng1,LI Xiang-wei2,ZHAO Wen-zhong1(1.School of Mechanical Engineering,Dalian Jiaotong University,Dalian 116028,China;2.Technic Center,Qiqihar Railway Rolling Stock(Group) Co.Ltd,Qiqihar 161000,China);Prediction of Fatigue Life of Railway Vehicle Welded Construction Based on Secondary Development Technology and Standard-AAR[J];Journal of the China Railway Society;2007-03
9 LI Si-kun, GUO Yang, YANG Qiang, ZHAO Wen-hui (Institute of Computer Science and Technology, National University of Defense Technology, Changsha 410073,China);Collaborative Virtual Prototyping and Collaborative Design Methodology[J];Acta Simulata Systematica Sinica;2001-01
10 ZHAO Wen1, WANG Wei-ping1, ZHU Yi-fan1, HU Xiao-feng2 (1Department of Systems Engineering and Mathematics, NUDT, Changsha 410073,China; 2Center of Combat Simulation, National Defense University, Beijing 100091, China);Towards Technology of Collaborative Virtual Prototyping[J];Acta Simulata Systematica Sinica;2001-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIU Yong_jun 1, DING Li_fen 1,TONG Guan_lin 2 (1.College of Mechanical and Electronic Control Engineering,Northern Jiaotong University, Beijing 100044,China; 2.Gucheng Depot of Beijing Subway,Beijing,100043,China);Dynamics Simulation of Forced-Steering Mechanism Based on A Virtual Prototype[J];Journal of Northern Jiaotong University;2002-04
2 LU Xin,XIU Yi(1.Liaodong Institute of Textile and Clothing,Dandong 118003,China;2.Dean's Office,Beijing Institute of Clothing Technology,Beijing 100029,China);Development of the Middle-senior Pattern-modified System Based-on Apparel CAD[J];Journal of Beijing Institute of Clothing;2005-04
3 RONG Hui1, WU Guo-qing2, WANG Ge-fang2 (1. No. 3 Brigade of Graduate, Ordnance Engineering College, Shijiazhuang 050003, China; 2. Ordnance Technology Institute, Shijiazhuang 050000, China);3D Data Auto-Collecting System for Ordnance Equipment[J];Ordnance Industry Automation;2006-11
4 CHEN Xin-rong, YU Yue-qing, JIANG Chun-fu, LIU Ying-chun ( College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China );Robot Simulation Based on Virtual Prototype[J];Journal of Beijing Polytechnic University;2004-01
5 MU Jie1,ZHOU Yu-jie2,ZHAO Ling2(1.Dept.of Scientific & Technological Management,Beijing Institute of Machinery,Beijing 100085,China;2.China Academy of Machinery Science and Technology,Beijing 100044,China);Rescarch and application of numerical prototyping system of creatively designed numerical control machine tool[J];Journal of Beijing Institute of Machinery;2007-04
6 WANG Fei YANG Xiang long FENG Yun cheng (Beijing University of Aeronautics and Astronautics, School of Management);Virtual Reality Simulation and Its Application on Aircraft Assembling[J];Journal of Beijing University of Aeronautics and Astronautics;2001-02
7 FENG Fuzhang, FENG Yali, ZHANG WenmingCivil and Environmental Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Lateral movement of lifting strings connected by screwed joints and spherical joints in deep sea by finite element analysis and virtual prototype technology[J];Journal of University of Science and Technology Beijing;2006-12
8 CHEN Hong,SHI Xiang-dong,YAN Jin-ping(Beijing Institute of Graphic and Communication,Beijing 102600,China);Printing Failure Learning System Based on Virtual Printing Press[J];Packaging Engineering;2007-10
9 YANG Ming-lang,XIA Guo-wei(Nanchang University,Nanchang 330031,China);Influence of Immaterial Factors on Product Design[J];Packaging Engineering;2008-04
10 CUI Wei1,XU Tiegang2,HAN Weihua2 (1. Xi'an Jiaotong University, Xi'an 710049, Chna; 2. Staff College, Academy of Engineering Physics, Mianyang 621900, China);Virtual training technique and system development[J];Journal of Chengdu University of Information Technology;2003-04
China Proceedings of conference Full-text Database 10 Hits
1 TIAN Dapeng1 , WU Yunjie, LIU Youmin (School of automation science and electrical engineering, Beihang University, Beijing 100191, China);Virtual Prototype Design and Application for Flight Simulator Turning Table[A];[C];2008
2 Liu Fangyu Yu Fangjie(Beijing Institute of Computer Application & SimulatingTechnology);Teehnotogy of virtual protolype in Guided Head luformation processing system[A];[C];2000
3 SHENG Hong-fei~1,CHENG Ding-fang~2,CHENG Xiao-rong~1 (1 Dep.of Electromechanical Engin.,Wuhan Univ.of Sci.& Engin.,Wuhan Hubei 430073,China; 2 Research Institute of Int.Manufacture and Control of Wuhan Univ.of Tech.,WuHan 430063,China);Car Cockpic Space Design and Evalucation Research Besed on Virtual Ergonomics[A];[C];2008
4 ;具有触觉力反馈功能的虚拟油泥造型系统[A];[C];2008
5 Chen Dingning Peng Jinmin (Electromechanical and Automatic Engineering Department, Fujian University of Technology, Fuzhou 350014,China);Research and Application of Parametric CAD Technology on UG Platform[A];[C];2009
6 WANG Tao FEI Min-rui (School of Mechatronical Eng.& Auto.,Shanghai Univ.,Shanghai 200072,China);The Research of the Construct of Virtual Environment and Applications in Monitor Systems[A];[C];2000
7 Wang Dongai,Liu Meihua,Yang Chuanmin,Qiao Zhixia (Tianjin Commerce University);Virtual Prototyping and Its Application in Package Machine Design[A];[C];2006
8 WANG Dongai LIU Meihua YANG Chuanmin QIAO Zhixia (Tianjin Commerce University);VIRTUAL PROTOTYPING AND ITS APPLICATION IN PACKAGE MACHINE DESIGN[A];[C];2006
9 LIU Gang, Wang Xing-ren, JIA Rong-zhen (Beijing University of Aeronautics & Astronautics, Beijing, 100083,China);Analysis and Study for Dynamic Virtual Prototype of Airplane[A];[C];2004
10 Pan Shuangxia, Liu Jing, Feng Peien, Gao Feng(The State Key Laboratory of Fluid Power Transmission & Control, Zhejiang University, Hangzhou 310027, China);Study of the Integrated Modeling and Co-simulation Method of the Mechanical and Electro-hydraulic System for the Virtual Excavator-robot Prototyping Technology[A];[C];2003
【Co-references】
Chinese Journal Full-text Database 2 Hits
1 CHEN Ai-hua, SUN Li-ping, LIYe(School of Transportation Engineering,Dalian Jiaotong University,Dalian 116028,China);Parameter Design of the Steel Structure of Car Body for Passenger Train[J];Journal of Liaoning Normal University(Natural Science Edition);2006-02
2 LU Juan, HONG Rong-jing, ZHU Zhuang-grui Machinery and Power Engineering School of Nanjing Industry University;MODAL ANALYSIS OF FITTINGS OF ALUMINIUM-ALLOY CAR BODY FOR METRO[J];Journal of Railway Engineering Society;2005-06
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 YANG De-qing, LIU Yong-jun, JIN Xian-ding (Research Institute of Structural Mechanics,School of Naval Architecture and Ocean Engineering,Shanghai Jiao long Universily.Shanghai 200030, China; Northern Jiaotong University,Beijing 100044,China) E-mail address: yangdq@sjtu.edu.cn (yang De-qing);Structural Topology Optimal Design to Reduce Vibration and Noise of Thin Plate[J];Journal of Ship Mechanics;2003-05
2 LI Sheng, ZHAO De you ( School of Naval Archit. & Mar. Eng., Dalian Univ. of Technol., Dalian 116024, China );Calculation of acoustic field radiated by vibrating structures using BEM[J];JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY;2000-04
3 LI Si kun,GUO Yang,PENG Yu xing,Yang Jun (College of Computer, National Univ. of Defense Technology, Changsha 410073, China);Research and Implementation of a Distributed Framework for Concurrent Design[J];JOURNAL OF NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY;2000-01
4 Zhao Wen Wang Weiping Zhu Yifan (Department of Systems Engineering and Mathematics, NUDT, Changsha, 410073) Hu Xiaofeng (National Defense University,Beijing, 100000);Towards Technology of Virtual Prototyping in Weapon Systems[J];JOURNAL OF NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY;1999-01
5 ;Visual Simulation of Virtual Battlefield[J];MEASUREMENT & CONTROL TECHNOLOGY;1999-06
6 GUO Yang, LI Si Kun, and YANG Qiang (Institute of Computer Technology, National University of Defense Technology, Changsha\ 410073);A NEW TOOL ENCAPSULATION METHOD FOR CAD FRAMEWORK[J];JOURNAL OF COMPUTER RESEARCH AND DEVELOPMENT;1999-02
7 LI Si Kun\ GUO Yang\ YANG Qiang\ ZHAO Wen Hui (Department of Computer Science,National University of Defense Technology,ChangSha\ 410073);RESEARCH ON VIRTUAL PROTOTYPING TECHNOLOGY FOR CONCURRENT DESIGN[J];JOURAAL OF COMPUTER AIDED DESIGN & COMPUTER GRAPHICS;1999-03
8 LIU Ke-long, YAO Wei-xing~*, MU Xue-feng(School of Aerospace Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);A method of structural shape optimization based on Kriging model[J];Chinese Journal of Computational Mechanics;2006-03
9 Wei Youshuang Wang Fei Feng Yuncheng (Beijing University of Aeronautics and Astronautics, School of Management,100080);System Simulation, Multimedia and Virtual Reality[J];COMPUTER SIMULATION;1999-02
10 ZHAO Qi,DING Yan-chuang(School of Mechanical Engineering,Dalian Jiaotong University,Dalian 116028,China);Experimental technology study on the virtual fatigue of welded structure[J];Journal of Machine Design;2007-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved