Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Low Temperature Architecture Technology》 2008-04
Add to Favorite Get Latest Update

ELASTIC DISTORTIONAL BUCKLING OF COLD-FORMED LIPPED CHANNEL COLUMN WITH DIAPHRAGMS

SUN Mi,WANG Guang,YAO Jian (Institute of Structural Engineering,Zhejiang University,Hangzhou 310027,China)  
This paper uses the finite element program ABAQUS to analyze the linear elastic distortional buckling of lipped channel column with two reinforcement measures by adding diaphragms and connecting rods.The results show that lipped channel column with additional diaphragms can enhance more buckling load than that with additional connecting rods.After comparision,we found that adding the rectangular diaphragms to the lipped channel at a distance of a quarter-wave length is the most economical and effective way to strengthen the lipped channel.
【CateGory Index】: TU392.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 LI Yuanqi1,LIU Xiang1,SHEN Zuyan1,YAO Xingyou1,QIN Yafei2(1.Department of Building Engineering,Tongji University,Shanghai 200092,China;2.Blue Scope Steel(Shanghai) Co.,Ltd,Shanghai 201613,China);Experimental study on distortional buckling control for high-strength cold-formed thin-walled steel lipped channel columns subject to axial compression[J];Journal of Building Structures;2010-11
【Citations】
Chinese Journal Full-text Database 1 Hits
1 GU Jian-fei1,YAO Jian1*,QIAN Guo-zhen2(1.Department of Civil Engineering,Zhejiang University,Hangzhou 310027,China; 2.Hangzhou Tianyuan Architectural Design and Research Institute,Hangzhou 311201,China);Finite Element Analysis and an Effective Measure to Distortional Buckling of Cold-Formed Channel Columns[J];Bulletin of Science and Technology;2007-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 HU Dong-qing (Huaibei Vocational Technical College,Huaibei,Anhui 235000);Three Dimensional Finite Element Analysis of Engine Connecting Rod[J];Journal of Anhui Agricultural Sciences;2009-14
2 WANG Shuang-jie~1,2, HUANG Xiao-ming~2, HOU Shu-guang~2 (1.The First Highway Survey and Design Institute of China,Xi′an Shaanxi 710068,China;2.Transportation College of Southeast University,Nanjing Jiangsu 210096,China);Numerical Analyses of Pavement Deformation and Stress in Permafrost Regions[J];Journal of Glaciology and Geocryology;2006-02
3 PENG You-yu,LIU Guang-zheng,GUO Xiao-yan(China North Vehicle Research Institute,Beijing 100072,China);the FEA of Primary Parts of Short-long Arm Suspension[J];Vehicle & Power Technology;2009-03
4 HAN Ming,NING Ke-yan,WANG Jiang-bing (Science and Technology on Vehicle Transmission laboratory,China North Vehicle Research Institute,Beijing 100072,China);Finite Element Analysis of Friction-disc Riveting[J];Vehicle & Power Technology;2011-01
5 Wang Xingguo1 Wu Lizhi2 Xiao Yunfeng2(1.Beijing University of Chemical Technology,Beijing 100029;2.Department of Mechanical Engineering,Beijing Institute of Petro-chemical Technology,Beijing 102617);Mechanical Deformation Analysis of Diaphragm Compressor Metal Diaphragm[J];Journal of Beijing Institute of Petro-Chemical Technology;2008-01
6 GONG Yan-xia,SHEN Xiao-hong,NIE Xue-jun(College of Mechanical Engineering,Beijing Technology and Business University, Beijing 100048,China);BUMPER CRASH SIMULATION STUDY AT LOW SPEED ON ABAQUS[J];Journal of Beijing Technology and Business University(Natural Science Edition);2009-03
7 LI Zhi-yuan1,LIN Shi-zhu1,ZHU Xi-xia2(1.Architecture and Civil Engineering School,Inner Mongolia University of Science and Technology,Baotou 014010,China;2.Shandong Yiyuan Yuantain Housing Go.,Ltd.,Yiyuan 256100,China);The thickness of fire-protection layer of one plane steel frame[J];Journal of Inner Mongolia University of Science and Technology;2009-03
8 DING Hong-yan1,2,LE Cong-huan1,ZHANG Pu-yang 1,2(1 School of Civil Engineering,Tianjin University,Tianjin 300072,China;2 Tianjin Key Laboratory of Civil Engineering Structure and New Materials,Tianjin 300072,China);Structural behavior analysis of the pipe-in-pipe riser subjected to vessel impact[J];Journal of Ship Mechanics;2010-08
9 SANG Nan,etc.(Changzhou Institute of Technology,Changzhou 213002,China);Lightweight design for front-swing arm of an automobile base on ABAQUS[J];Journal of Changchun Institute of Technology(Natural Sciences Edition);2010-02
10 WANG Jun-qi1,LU Feng2(1.Department of Hydraulic and Hydropower Engineering,North China Electric Power University,Beijing 102206,China;2.Institute of Water Resources and Hydropower Research,Beijing 100044,China);Unified Strength Theory Constitutive Model Embedded Software ABAQUS and Its Application in Tunnel Engineering[J];Journal of Yangtze River Scientific Research Institute;2010-02
China Proceedings of conference Full-text Database 10 Hits
1 Fang Jiazhi, Liu Guangzheng China North Vehicle Research Institute,Beijing,100072;Study on Nonlinear Analysis of FEA of Safety of Coal Mill[A];[C];2008
2 ;基于数值模拟的车门抗凹性分析[A];[C];2009
3 LIU Sheng-feng,ZHANG Yan-xia,ZHOU Dong (Institute of Civil Engineering,Chongqing Jiaotong University,Chongqing 400074,China);Two algorithms based on a cyclic polycrystal model[A];[C];2009
4 Jin Shi,Yang Hezhou,Su Xiurong Zhengzhou Nissan Automobile Co.,Ltd.450016;The Design and CAE Analysis of Hood and Hood-intake System for Y43[A];[C];2010
5 Li Zhipeng,Wang Suyan (School of Civil and Hydraulic Engineering,State Key Laboratory of Coastal and Offshore Engineering,Dalian University of Technology,Dalian 116024);NONLINEAR NUMERICAL SIMULATION OF BONDING PERFORMANCE BETWEEN GFRP AND HIGH-STRENGTH CONCRETE[A];[C];2009
6 YANG Jianghui,DING Wenbin,ZHOU Kai (China Offshore Oil Engineering Co.,Ltd.,Tianjin 300451,China);The Extremum Response Analysis of Deep Water Jacket Fixed Platform Based on ABAQUS/AQUA[A];[C];2010
7 Wu Zhaoyang and Li Zhennong (Civil Enginieering College of Hunan University,Changsha 410082,China);Finite Element Modeling Research on the Impact of the Yuanjialing Subway Station to the Nearby Buildings[A];[C];2010
8 HUANG Ming-lan,GAO Ri (School of Civil Engineering,Beijingjiaolong University,Beijing 100044,China);DAMAGE SIMULATION OF PIPELINE STRUCTURE BASED ON NATURAL FREQUENCY[A];[C];2011
9 Chen Jingjie,Zhang Yongnuan,Chen Jiusheng College of Aeronautical Automation,Civil Aviation University of China,TianJin 300300,P.R.China;On Theoretical Architecture and Its Application of CAE for Aviation Maintenance Process[A];[C];2008
10 LI Guo-chang,WANG Shuo,TIAN Lei,BAO Cheng-yuan(School of Civil Engineering,Shenyang Jianzhu University,Shenyang 110168,China);NONLINER FEM ANALISIS ON THE PERFORMANCE OF CONCRETE BUCKLING RESTRAINED BRACE JOINTS[A];[C];2012
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 YE Qian,YAO Jian Department of Civil Engineering, Zhejiang University, Hangzhou 310027,China; FINITE ELEMENT ANALYSIS OF DISTORTIONAL BUCKLING OF COLD-FORMED CHANNEL COLUMN[J];Low Temperature Architecture Technology;2006-01
2 ZHENG Jian-can,YAO Jian (Institute of Structural Engineering,Zhejiang University,Hangzhou 310027,China);REINFORCING AND FINITE ELEMENT ANALYSIS TO DISTORTIONAL BUCKLING OF COLD-FORMED CHANNEL BEAMS[J];Low Temperature Architecture Technology;2008-05
3 JIANG Fusheng YUAN Xiaoguang (Wuhan Iron and Steel Design and Research Institute);SPECIFICS AND FUTURE OF THE PRODUCTION OF ROLL FORMED SHAPES IN CHINA[J];IRON AND STEEL;2000-09
4 YAO Jian1 , TENG Jin-guang2 (1. Department of Civil Engineering, Zhejiang University, Hangzhou 310027, China; 2. Department of Civil and Structural Engineering, the Hong Kong Polytechnic University, Hong Kong, China);WEB ROTATIONAL RESTRAINT IN ELASTIC DISTORTIONAL BUCKLING OF COLD-FORMED LIPPED CHANNEL SECTIONS[J];Engineering Mechanics;2008-04
5 YAO Jian (Institute of Structural Engineering, Zhejiang University, Hangzhou 310027, China);DISTORTIONAL BUCKLING LOADS OF COLD-FORMED LIPPED CHANNELS[J];Engineering Mechanics;2008-12
6 CHENG Jie2 , *YAO Jian1,2 (1. College of Urban Construction, Zhejiang Shuren University, Hangzhou 310015; 2. Institute of Structural Engineering, Zhejiang University, Hangzhou 310027);STUDY ON WEB ROTATIONAL RESTRAINT SUBJECTED TO FLEXURAL STRESS[J];Engineering Mechanics;2010-11
7 Zhao Qilin Wang Jingquan Jin Guangqian (Institute of Engineering Army of ALP University of Technology Nanjing 210007) Sun Baojun (Institute of Civil Engineering of Southeast University Nanjing 210018);ANALYSIS ON THE "REVERSE-ARCH PRESTRESSED TECHNIQUE"AND THE IMPROVED BEARING CAPACITY FOR STEEL STRUCTURE STRENGTHENED BY CARBON-FIBRE[J];Steel Construction;2002-03
8 Jiang Lu He Baokang Zhang Wei(Xi'an University of Architecture and Technology Xi'an 710055);REVIEW AND ANALYSIS OF EXPERIMENTAL AND THEORETICAL RESEARCHES ON DISTORTIONAL BUCKLING OF COLD-FORMED THIN-WALLED STEEL MEMBERS[J];Steel Construction;2006-05
9 Wu Jinqiu Tong Genshu(Dept.of Civil Engineering,Zhejiang University Hangzhou 310027);LOCAL AND DISTORTIONAL BUCKLINGS OF DIFFERENT INCLINED LIPPED PURLINS[J];Steel Construction;2006-05
10 Ding Guoliang(China Cold Roll-Forming Steel Association Nanjing 210012);DEVELOPMENT STATUS AND PROSPECTS OF CHINA COLD ROLL-FORMING STEEL INDUSTRY[J];Steel Construction;2008-01
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 CHEN Shaofan(Xi'an University of Architecture and Technology, Xi'an 710055, China);Local Interactive Bucking and Distortional Buckling of Lipped Channels[J];Journal of Building Structures;2002-01
2 Chen ]i (Xian University of Architecture & Technology);Direct Strength Method for the Design of Cold-Formed Lipped Channel Members[J];Progress in Steal Building Structures;2003-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved