Full-Text Search：
《FORGING & STAMPING TECHNOLOGY》 1997-01

## 3D rigid-plastic finite element analysis of backward spinning of cylindrical workpiece

(South China University of Technology) Zhou Zhaoyao; Ruan Feng(Harbin Institute of Technology) Lu Yan; Wang Zheng; Xue Keming
Backward spinning is analyzed by 3D rigid-plastic FEM. A 3D mechanical model for backward spinning is presented in this paper. The distributions are obtained of strain-rate and sterss in the contact area of the roller and its adjacent area. The results can well interpret the principle of backward spinning deformation. The relationship between the roller angle and three components of spinning force has been found out,and the optimum roller angle,when the general spinning force gets to the minimum va1ue, is calculated. The distributions of deformation area obtained by FEM agree with the experimenlal result well.
【CateGory Index】： TG31
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
 【References】
 Chinese Journal Full-text Database 6 Hits
 1 CHEN Yi-ming~(1),ZHOU Yi-qing~(2) (1.Jiangmen Broadcast-Television University,Jiangmen Guangdong 529000,China; 2.College of Mechanical Engineering,South China University of Technology,Guangzhou Guangdong 510640,China);Three-dimensional numerical simulation of the combined process of stretch spinning and drawing for the overlength circular cone pipe without mandrel[J];Forging & Stamping Technology;2005-05 2 Xu Yi; Li Ping ;Shan Debin; Lu yan(School of Materials Science and Engineering ,Harbin Institute of Technology);Simulation Analysis on Backward Tube Spinning Force[J];HOT WORKING TECHNOLOGY;1999-03 3 XU Yi SHAN De bin LI Ping LU Yan (Harbin Institute of Technology,Harbin 150001);STUDY ON THE KEY PROBLEMS OF 3D RIGID PLASTIC SIMULATION OF TUBE SPINNING[J];JOURNAL OF PLASTICITY ENGINEERING;1999-04 4 ZHANG Li-peng(College of automobile and traffic engineering,Liaocheng University,Liaocheng 252059 China)LIU Zhi-chong(Dicastal Wheel Manufacturing Co.Ltd,Qinhuangdao 066003 China)ZHOU Hong-yu(Kennametal(China) Ltd.,Beijing 100020 China);The development and present situation analysis of power spinning of cylinders[J];Journal of Plasticity Engineering;2006-01 5 LIU Jian hua,YANG He,LI Yu qiang (Northwestern Polytechnical University, Xi'an 710072, China);State of the art and trend of metal spinning technique[J];Heavy Machinery;2002-03 6 Xu Yi, Shan Debin, Li Ping and Lu Yan School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China;3D RIGID PLASTIC FEM NUMERICAL SIMULATION ON BACKWARD TUBE SPINNING[J];THE CHINESE JOURNAL OF NONFERROUS METALS;1999-S1
 【Citations】
 Chinese Journal Full-text Database 1 Hits
 1 Zhou Zhaoyao; Lu Yan ;Zhao Xianming; Xue Kemin; Wang Huimbin(Harbin Institute of Technology 150006);Finite Element Analysis of Cylindrical Parts at Forced Spinning[J];JOURNAL OF PLASTICITY ENGINEERING;1994-01
 【Co-citations】
 Chinese Journal Full-text Database 10 Hits
 1 HUANG Liang,YANG He,ZHAN Mei(State Key Laboratory of Solidification Processing,School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China);Development of the research on splitting spinning[J];Materials Science and Technology;2008-04 2 HAN Dong1,2, ZHAO Shengdun1, ZHANG Liwu2, YANG Yantao2(1.Mechanical School of Xi'an Jiaotong University, Xi'an 710049, Shanxi China;2.Xi'an Aerospace Power Machinery Factory, Xi'an,710025, Shanxi China);Research on Spinning Process for Complex Workpiece of TC4 Alloy with Thin Wall and Special Shape[J];;2005-06 3 Harbin Institute of Technology Li Kezhi;Solution of Local Loading and Unloading Problems in Numerical Simulation on Power Spinning[J];Metal Forming Technology;1996-06 4 MEI Ying~1 LI Rui-qin~1 ZHANG Chen-ai~2 FENG Wen-wu~2 (1.North University of China.Taiyuan 030051,China;2.Jiangyang Chemical Plant,Taiyuan 030051,China);Numerical Simulation and Spinning Force Analysis on Backward Spinning of Tube[J];Machine Design & Research;2007-04 5 CHEN Jia-hua,XIA Qin-xiang,ZHANG Shi-jun,RUAN Feng (South China University of Technology,Guangzhou 510640,China);Application of numerical simulation method in metal spinning[J];Machine Development;2005-02 6 KUANG Wei-hua~1,XIA Qin-xiang~2,RUAN Feng~2(1.Faculty of Material and Energy,Guangdong University of Technology,Guangzhou 510006,China;2.College of Mechanical Engineering,South China University of Technology, Guangzhou 510640,China);Process parameter's influence on thickness of first neck-section in offset forward spinning[J];Light Alloy Fabrication Technology;2006-08 7 KUANG Wei-hua,XIA Qin-xiang,RUAN Feng (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou 510006,China; College of Mechanical Engineering, South China University of Technology, Guangzhou 510640,China);Thickness Variation Regular Research For One Pass Neck-spinning[J];Hot Working Technology;2006-03 8 LI Qi-jun1,LU Hong-jun1,WANG Qi1,SHAN De-bin2(1.Aerospace Research Institute of Material and Processing Technology,Beijing 100076,China;2.Haerbin Institute of Technology,Haerbin 150001,China);FEM numerical simulation of spinning processing for thin TC4 alloy workpiece with curvilinear shape[J];Journal of Tianjin Polytechnic University;2008-02 9 Li Qijun Lü Hongjun Wang Qi(Aerospace Research Institute of Materials and Processing Technology,Beijing 100076);FEM Numerical Simulation of Spinning Processing for Workpiece of TC4 Alloy With Great Ratio of Height to Diameter[J];Aerospace Materials & Technology;2006-S1 10 Ruan Feng;Zhou Zhaoyao ( South China University of Technology) LuYan; WanZheng; Xue Kemmg (Harbin Institute of Technology);3D RIGID-PLASTIC FINTEELEMENT ANALYSIS OF BACKW ARD SPINNING OF CYLINDRICAL WORKPIECE[J];机械工程学报(英文版);1996-01
 【Co-references】
 Chinese Journal Full-text Database 10 Hits
 1 X Yi,Zhang Shihong,Yang Ke,Shan Debin,Li Ping,L Yan;3D RIGID-PLASTIC FINITE ELEMENT ANALYSIS ONFORWARD TUBE-SPINNING[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;2000-04 2 Li Kezhi,Lu Yan;INFLUENCE OF PROCESS PARAMETERS ON RESIDUAL STRESS DISTRIBUTIONS IN FORWARD TUBE SPINNING[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1997-04 3 Sun changguo ; Yu Datai; Hu Jianzhong; Ma Zhenping; Li Yu( 1) Robot Research Institute, UST Beijing, Beijing 100083, China 2) 12th Research Institute, MEI, Beijing 100016, China);^Self-learning Motion Control of Spinning Machine[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1998-05 4 ;Progress and Development of R. S. Alumnium Alloys for Elevated Temperature Utlization[J];Materials Review;1994-03 5 Yu Guifu Dai shenglong Hou Shue Yan Minggao (Institute of Aeronautical Materials , Beijing );The Effect of the Degassing on the Properties of RS Al -Li Powder Alloys[J];Journal of Materials Engineering;1992-05 6 XUE Ke-min, JIANG Shu-yong, KANG Da-chang (School of Materials Science and Engineering , Harbin Institute of Technology Harbin, 15001 China);Power spinning deformation of thin-walled cylinders with longitudinal inner ribs[J];Material Science and Technology;2002-03 7 Zhou Zhaoyao; Lu Yan; Wan Huibin; Zhao Xiangming (Harbin Institute of Technology);A Rigid-plastic FEM Analysis of the Plastic Flow Field of Backward Spining[J];MATERIAL SCIENCE AND TECHNOLOGY;1994-02 8 Zhou Zhaoyao;Lu Yan;Zhao Xianmin;Xue Kemin;Zhan Lijun;Teng Yun(Harbin Institute of Technology)(Beijing 239 Factory);Stepped Spinning Experimental Study on Cylindrical Workpieces[J];MATERIAL SCIENCE AND TECHNOLOGY;1995-02 9 Zhang Lefu Xie Changsheng Zhang Yizeng (Department of Material Science and Engineering, Huazhong University of Science and Technology Wuhan,430074,P.R.C);Application of Artificial Neural Network in Material Experimental Data Processing[J];MATERIAL SCIENCE AND TECHNOLOGY;1997-01 10 Yang Liushuan;Yang Gencang;Zhou Yaohe(Northwestern Polytechnical University);Developments and Trends of Spray Deposition in Rapid Solidification Technology[J];MATERIALS SCIENCE AND ENGINEERING;1994-02
 【Secondary References】
 Chinese Journal Full-text Database 10 Hits
 1 BI Yu, ZHU He, XIA Shaoling, LI Quanyue(College of Materials Science and Engineering, Henan University of Technology, Zhengzhou 450007);Study on Constitutive Equation of Heat-resistant Aluminium Alloy AlFeVSi Prepared by a Spray Deposition-extrusion Route[J];Materials Review;2006-S2 2 XU Wen-chen, SHAN De-bin, LU Yan,LI Chun-feng (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China,);Research on the multi-pass shear spinning technology of small-angle conical workpieces[J];Material Science and Technology;2004-01 3 HUANG Liang,YANG He,ZHAN Mei(State Key Laboratory of Solidification Processing,School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China);Development of the research on splitting spinning[J];Materials Science and Technology;2008-04 4 ZHANG Li-peng~(1),LIU Zhi-chong~(2)(1.School of Automobile and Transportation Engineering,Liaocheng University,Liaocheng Shandong 252059,China;2.Dicastal Wheel Manufacturing Co.,LTD,Qinhuangdao Hebei 066003,China);Analysis of power spinning process parameters selection mode for cylinders[J];Forging & Stamping Technology;2006-01 5 ZHAO Lin-yu HAN Dong ZHANG Li-wu LI Zeng-hui WANG Bei-ping YANG Yan-tao GONG Jun-shan (Xi'an Aerospace Power Machine Factory,Xi'an 710025,China);Typical application and development of metal spinning technology and equipment[J];Forging & Stamping Technology;2007-06 6 ZHAO Teng-lun,HUANG Jian-feng,ZHANG Qing-quan,YAO Jin(School of Manufacturing Science and Engineering,Sichuan University,Chengdu 610065,China);FEM numerical simulation of tube backword spinning[J];Forging & Stamping Technology;2008-01 7 HOU Hongliang,YU Xiaofang,WANG Yaoqi (Beijing Aeronautical Manufacturing Technology Research Institute,Beijing 100024,China);Development of Spinning Equipment and Its Related Technology in China[J];China Metal Forming Equipment & Manufacturing Technology;2009-04 8 WANG Xinxin,LIU Weidong,QU Hua,CHEN Chao(College of Materials and Chemical Engineering,Liaoning Institute of Technology,Jinzhou 121001,China);Study on the valence electron theory for the effects of V on Al_(12)Fe_3Si[J];Ordnance Material Science and Engineering;2009-05 9 MEI Ying~1 LI Rui-qin~1 ZHANG Chen-ai~2 FENG Wen-wu~2 (1.North University of China.Taiyuan 030051,China;2.Jiangyang Chemical Plant,Taiyuan 030051,China);Numerical Simulation and Spinning Force Analysis on Backward Spinning of Tube[J];Machine Design & Research;2007-04 10 MEI Ying1,LI Rui-qin1,ZHANG Chen-ai2,FENG Wen-wu2(1.North University of China,Taiyuan 030051,China;2.Jiangyang Chemical Plant,Taiyuan 030051,China);Stress and Strain Analysis of Tube Backward Spinning Based on ANSYS[J];Machine Design & Research;2008-06
 China Proceedings of conference Full-text Database 2 Hits
 1 ;DEVELOPMENT OF SPINNING EQUIPMENT AND ITS RELATED TECHNOLOGY IN HOME[A];[C];2008 2 ZHANG Rong-hua, ZHANG Yong-an, ZHU Bao-hong, WANG Feng, XIONG Bai-qing, LIU Ya-zheng (School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China; State Key Laboratory for Fabrication and Processing of Nonferrous Metals, Beijing General Research Institute for Nonferrous Metals, Beijing 100088, China);Effect of temperature on microstructure of spray formed Al-8. 5Fe-1. 3V-1. 7Si alloys[A];[C];2005
Similar Journals
 > Heat Treatment of Metals > Machinery > Journal of Shanghai Jiaotong University > Ordnance Material Science and Engineering > Forging & Stamping Technology > Die & Mould Industry > Glass > Materials Science and Technology > Die & Mould Manufacture > Journal of North University of China(Natural Science Edition)