Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 1997-04
Add to Favorite Get Latest Update

Influence of process parameters on residual stress distribution in backward tube spinning

Northwestern Polytechnical Univresity L i Kezhi L i Hejun Harbin Institute of Technology Xue Kemin Lu Yan  
Because of the nonuniform plastic deformation,residual stresses occur in spun parts. The magnitude and distribution of residual stresses have an important influence on used property of spun parts.In this paper,residual stresses of spun parts have been estimated by elasto- plastic FEM. The influence of the process parameters( reduction in thickness,feed,roller angle,blank thickness, material properties,etc.) on the residual stress distribution has been obtained.The calculated results are compared favourably with experimental results.
【CateGory Index】: TG376
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 GUO Fu-lin,LI Ping,QIAN Chen-hao,ZHANG Bin-bin(School of Material Science and Engineering,Hefei University of Technology,Hefei 230009,China);Simulation and Experiment Research on the Power Spinning Process for Cylindrical Parts[J];Journal of Netshape Forming Engineering;2010-05
2 CHEN Jia-hua,XIA Qin-xiang,ZHANG Shi-jun,RUAN Feng (South China University of Technology,Guangzhou 510640,China);Application of numerical simulation method in metal spinning[J];Machine Development;2005-02
3 LIU Jian hua,YANG He,LI Yu qiang (Northwestern Polytechnical University, Xi'an 710072, China);State of the art and trend of metal spinning technique[J];Heavy Machinery;2002-03
4 TAO Yu-liang,XU Yu-ping (Zhengzhou Textile Mechinery Plant,Zhengzhou 450053,China);Failure Analysis of Spinning & Packing of Water-level Sensor[J];Journal of Zhengzhou Textile Institute;2001-01
【Co-citations】
Chinese Journal Full-text Database 1 Hits
1 YANG Zhi1,3,HOU Hongliang2,ZHOU Wenlong3 (1.Liaoning Technical University,Fuxin1 23000,Liaoning China; 2.Beijing Aeronutical Manufacturing Technology Research Institute,Beijing 100024, China; 3.School of Materials Science and Engineering, Dalian University of Technology,Dalian 116024, Liaoning China);Study on Distribution of Residual Stress to Aluminum Alloy by Shear Spinning[J];China Metal Forming Equipment & Manufacturing Technology;2008-05
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 X Yi,Zhang Shihong,Yang Ke,Shan Debin,Li Ping,L Yan;3D RIGID-PLASTIC FINITE ELEMENT ANALYSIS ONFORWARD TUBE-SPINNING[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;2000-04
2 ZhaoJie Chang Junying Chen Jiaqing (Department of Mechanical Engineering, Beijing Institute of Petro-chemical Technology, Beijing 102617);Application of ANSYS Software in Solution of Contact Problem with Friction[J];Journal of Beijing Institufe of Petrochemical Technology;2003-04
3 ;Progress and Development of R. S. Alumnium Alloys for Elevated Temperature Utlization[J];Materials Review;1994-03
4 Yu Guifu Dai shenglong Hou Shue Yan Minggao (Institute of Aeronautical Materials , Beijing );The Effect of the Degassing on the Properties of RS Al -Li Powder Alloys[J];Journal of Materials Engineering;1992-05
5 XUE Ke-min, JIANG Shu-yong, KANG Da-chang (School of Materials Science and Engineering , Harbin Institute of Technology Harbin, 15001 China);Power spinning deformation of thin-walled cylinders with longitudinal inner ribs[J];Material Science and Technology;2002-03
6 XU Wen-chen, SHAN De-bin, LU Yan,LI Chun-feng (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China,);Research on the multi-pass shear spinning technology of small-angle conical workpieces[J];Material Science and Technology;2004-01
7 Zhou Zhaoyao; Lu Yan; Wan Huibin; Zhao Xiangming (Harbin Institute of Technology);A Rigid-plastic FEM Analysis of the Plastic Flow Field of Backward Spining[J];MATERIAL SCIENCE AND TECHNOLOGY;1994-02
8 Yang Liushuan;Yang Gencang;Zhou Yaohe(Northwestern Polytechnical University);Developments and Trends of Spray Deposition in Rapid Solidification Technology[J];MATERIALS SCIENCE AND ENGINEERING;1994-02
9 Qi Shichang; Kazuo Yasue(Wuhan Institute of Technology)(Government Industrial Research Institute, Nagoya.Jpn.);The production and Application of Rapidly Solidified Powder Aluminium Alloys[J];MATERIALS SCIENCE AND ENGINEERING;1994-02
10 Fu Dingfa Chen Zhenhua (Non equilibrium Materials Science and Engineering Institute,Central South University of Technology, Changsha 410083, China);The Present Development of Multi-layer Spray Deposition Technology[J];Development and Application of Materials;2001-02
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 WANG Xinxin,LIU Weidong,QU Hua,CHEN Chao(College of Materials and Chemical Engineering,Liaoning Institute of Technology,Jinzhou 121001,China);Study on the valence electron theory for the effects of V on Al_(12)Fe_3Si[J];Ordnance Material Science and Engineering;2009-05
2 BI Yu, ZHU He, XIA Shaoling, LI Quanyue(College of Materials Science and Engineering, Henan University of Technology, Zhengzhou 450007);Study on Constitutive Equation of Heat-resistant Aluminium Alloy AlFeVSi Prepared by a Spray Deposition-extrusion Route[J];Materials Review;2006-S2
3 XU Wen-chen, SHAN De-bin, LU Yan,LI Chun-feng (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China,);Research on the multi-pass shear spinning technology of small-angle conical workpieces[J];Material Science and Technology;2004-01
4 HUANG Liang,YANG He,ZHAN Mei(State Key Laboratory of Solidification Processing,School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China);Development of the research on splitting spinning[J];Materials Science and Technology;2008-04
5 ZHANG Li-peng~(1),LIU Zhi-chong~(2)(1.School of Automobile and Transportation Engineering,Liaocheng University,Liaocheng Shandong 252059,China;2.Dicastal Wheel Manufacturing Co.,LTD,Qinhuangdao Hebei 066003,China);Analysis of power spinning process parameters selection mode for cylinders[J];Forging & Stamping Technology;2006-01
6 ZHAN Mei,MA Ming-juan,YANG He,XU Yin-li(College of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an Shanxi 710072,China);Influence of roller parameters on power spinning of thin-walled shell with special shape[J];Forging & Stamping Technology;2006-05
7 ZHAO Lin-yu HAN Dong ZHANG Li-wu LI Zeng-hui WANG Bei-ping YANG Yan-tao GONG Jun-shan (Xi'an Aerospace Power Machine Factory,Xi'an 710025,China);Typical application and development of metal spinning technology and equipment[J];Forging & Stamping Technology;2007-06
8 WANG Fang,ZHANG Ning,FAN Tao,LI Yong-hua,WANG Zhong-tang(School of Materials Science and Engineering,Shenyang Ligong University,shenyang 110159,China);Research on defects of GH4169 thin-walled tube ball-spinning process[J];Forging & Stamping Technology;2010-04
9 LI Xin-he,YANG Xin-quan,WANG Yan-fen(School of Mechanical-electronic Engineering,Central South University,Changsha 410083,China);Research progress of thin-wall tube spinning[J];Forging & Stamping Technology;2011-01
10 HOU Hongliang,YU Xiaofang,WANG Yaoqi (Beijing Aeronautical Manufacturing Technology Research Institute,Beijing 100024,China);Development of Spinning Equipment and Its Related Technology in China[J];China Metal Forming Equipment & Manufacturing Technology;2009-04
China Proceedings of conference Full-text Database 3 Hits
1 ;DEVELOPMENT OF SPINNING EQUIPMENT AND ITS RELATED TECHNOLOGY IN HOME[A];[C];2008
2 Hu Lijin Zhan Mei Huang Liang Yang He (State Key Laboratory of Solidification Processing,College of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an,China);A Method of Predicting Rupture in Spinning Processes by Ductile Fracture Criteria Combined with Numerical Simulation[A];[C];2008
3 ZHANG Rong-hua, ZHANG Yong-an, ZHU Bao-hong, WANG Feng, XIONG Bai-qing, LIU Ya-zheng (School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China; State Key Laboratory for Fabrication and Processing of Nonferrous Metals, Beijing General Research Institute for Nonferrous Metals, Beijing 100088, China);Effect of temperature on microstructure of spray formed Al-8. 5Fe-1. 3V-1. 7Si alloys[A];[C];2005
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved