Full-Text Search：
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2000-06
Add to Favorite Get Latest Update

Establishment and implementation of equivalent drawbead model in sheet metal forming numerical simulation

Beijing University of Aero & Astro Xu Bingkun\ Shi Fazhong  
Drawbead application is an effect method in sheet metal deep\|drawing process to control material flow In sheet metal numerical simulation,equivalent drawbead model is usually used to save CPU\|time In this paper,an equivalent drawbead model is established according to some domestic and foreign literatures Effects of drawbead restraining force,plastic thickness strain,and drawbead lift force are considered in the model and all of these are implemented in our FEM code A simulation example is given in paper
【Fund】： 国家“8 6 3”目标产品项目
【CateGory Index】： TG38
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 JIANG Xianghua,ZHENG Jinqiao,WANG Yilin,LI Zhigang(National Key Lab.of Plastic Forming Simulation & Die Technique Huazhong University of Science and Technology,Wuhan 430074,Hubei China);Design and optimization of the drawbead of panels based on FE analysis[J];;2005-02
2 LI Qun,LI Na,GUO Bao-feng,JIN Miao(Key Laboratory of Advanced Forging & Stamping Technology and Science,Yanshan University, Qinhuangdao 066004,China);Study of sheet deformation characteristics under the cyclic loading applied by semi-circle drawbead[J];Forging & Stamping Technology;2013-02
3 Wang Tiefeng;Lin Xiankun;Qin Wendong;Huang Xingqiong;Guangxi University of Science and Technology;Wanxiang Qianchao Transmission Shaft Co. ,Ltd.;;Research and optimization of the excessive thinning for sheet forming based on finite element analysis[J];Forging & Stamping Technology;2014-12
4 CHEN Wen-lin~1,MIAO Liang~1,YAN Min~2,ZUO Zhi-gao~2(1.School of Material Science and Engineering,Hefei University of Technology,Hefei 230009,China;2.Hefei ZhongBang Technology Company,Ltd,Hefei 230088,China);Application of numerical simulation in automobile panel drawbead design[J];Journal of Hefei University of Technology(Natural Science);2005-12
5 ZHOU Lin1,LI Ping1,XUE Ke-min1,LIN Si-jie2,CUI Li-chun2 (1.School of Material Science and Engineering,Hefei University of Technology,Hefei 230009,China;2.Institute of Automobile Engineering,Jianghuai Automobile Co.,Ltd.,Hefei 230022,China);Numerical simulation of the stamping forming process of Refine business vehicle's inner panels[J];Journal of Hefei University of Technology(Natural Science);2007-02
6 LAN Feng-chong,WANG Yu-chao,CHEN Ji-qing(School of Auto Engineering,South China University of Technology,Guangzhou 510640,China);Advances in sheet metal forming simulation of automotive body[J];Computer Integrated Manufacturing Systems;2007-08
7 LIU Pu-xiang,LI Xiang-sheng,CHENG Song,RUAN Shang-wen(School of Machinery and Automation,Zhejiang Sci-Tech University,Hangzhou 310018,China);Application Research for Drawbead in Sheet Metal Drawing Based on Dynaform[J];Mechanical Engineer;2010-06
8 ZHOU Qi-tao,LU Xiao-yang,XU Yi-min,LIU Ying-yue;Influence of draw bead on sheet metal drawing[J];Die and Mould Technology;2012-06
9 JIANG Yue (Shuangyashan Radio & Television University,Shuangyashan 155100,China);Restraining Force of Drawbeads in Forming Dies of Auto Panels[J];Journal of Hebei Institute of Architecture and Civil Engineering;2012-04
10 LIU Kai;CHENG Siyuan;LI Suyang;LUO Xuli;YANG Xuerong;School of Electromechanical Engineering,Guangdong University of Technology;;Structure Optimization and Stamping Forming Simulation of Air-conditioner Chassis[J];Machine Tool & Hydraulics;2014-17
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 XU Bing kun SHI Fa zhong (Beijing University of Aeronautics and Astronautics, School of Mechanical Engineering and Automation);Numerical Simulation of Springback in Sheet Metal Forming[J];Journal of Beijing University of Aeronautics and Astronautics;2001-02
2 Yue Luyou, et al.;The finite element simulation analysis of sheet shaped by stamping[J];Electromachining & Mould;2003-01
3 Shanghai Jiaotong University Yin Xiongfei Peng Yinghong Ruan Xueyu;Influence of input parameters on FEA of sheet forming[J];FORGING & STAMPING TECHNOLOGY;2000-01
4 Jiangsu University Yue Luyou;Finite element simulation analysis of inserting part plate and motor shell stamping[J];Forging & Stamping Technology;2003-06
5 HUANG Yu-ping,WANG Bo,DENG Zhao-hu,ZHANG Yan-qin,RUAN Feng(School of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China);Optimized design of drawbead using improved genetic algorithm combined with BP artificial neural network[J];Forging & Stamping Technology;2007-05
6 GUO Yuqin(College of Mechanical and Electric Engineering,Xuzhou Normal University,Xuzhou Jiangsu 221116,China);Technology of Sheet Metal Stamping Simulation and its Development[J];Machine Tool & Hydraulics;2007-11
7 LI Xiao-ping,ZHANG Xia(Department of Material Science and Engineering,Chongqing University of Technology,Chongqing 400050,China);Current Status of Drawbead in Sheet Metal Forming[J];Journal of Netshape Forming Engineering;2009-02
8 CAO Yan-xin1,LI Kai2 (1Dept.of Mechanical Engineering,Changchun Institute of Technology,Changchun 130012,China) (2China FAW Mould Center,Changchun 130011,China);Dynaform_based simulation technology for drawing of car rocker[J];Machinery Design & Manufacture;2008-12
9 Liu Yanfang Shi Fazhong Feng Tianfei(School of Mechanical Engineering and Automation,Beihang University, Beijing 100083);ELABORATE IMPLEMENTATION OF AN EQUIVALENT DRAWBEAD MODEL IN THE NUMERICAL SIMULATION OF SHEET METAL FORMING[J];Chinese Journal of Mechanical Engineering;2005-01
10 ZHAO Da,DONG Xiang-huai,XIE Huan-yang,AI Zhen-qiu;AZ31 magnesium alloy electro-plastic flow stress model[J];Die and Mould Technology;2013-03
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Li Yuanchun(Department of Materials Science and Engineering,Northwestern Polytechnical University,Xian 710072);Liu Mabao;Wu Shidun;FINITE ELEMENT SIMULATION OF SUPERPLASTIC BULGING WITH SYMMETRIC DIE[J];Ordnance Material Science and Engineering;1995-04
2 Zhang Weibo Wang Longshan(Jilin University, Changchun, 130025) Luo Hongyun(Jilin Institute of Technology);REALIZATION OF GENETIC ALGORITHM IN THE SEQUENCING OF MACHINING OPERATIONS AND A DISCUSSION OF RELEVANT PROBLEMS[J];Acta Armamentarii;2002-02
3 Li Xinghong (Attached Factory)Zheng Zhishou Xu Dajun Shu Weijun (Teaching and Research Section of Manufacturing Technology);Research on the Nitrogen Cylinder for Die[J];Journal of Beijing Agricultural Engineering University;1988-03
4 WANG Xiao lin ZHOU Xian bin (Beijing University of Aeronautics and Astronautics,School of Mechanical Engineering and Automation);FE Contact Search Model Research in Sheet Metal Forming[J];JOURNAL OF BEIJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS;2000-03
5 XU Bing kun SHI Fa zhong (Beijing University of Aeronautics and Astronautics, School of Mechanical Engineering and Automation);Numerical Simulation of Springback in Sheet Metal Forming[J];Journal of Beijing University of Aeronautics and Astronautics;2001-02
6 Li Dongsheng; Huang Xiaoming; Hu Shiguang(Beijing University of Aeronautics and Astronautics,Dept. of Manufacturing Engineering);THE EXPERIMENTAL STUDY OF DRAWBEAD UNIT SIMULATION IN AUTO-BODY PANEL FORMING[J];JOURNAL OF BEIJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS;1995-02
7 Deng Zhi; Wang Xianjin(Faculty of Metal Forming, USTB, Beijing, 100083, PRC);Analysis of Sheet Metal Stress-strain Relations in Uniaxial and Biaxial Tension[J];北京科技大学学报(英文版);1994-Z1
8 CHEN Si zhong, WANG Tian lin, LIN Cheng, WU Zhi cheng (School of Vehicular Engineering, Beijing Institute of Technology, Beijing100081);The Car Body Panels Parameterized Modeling Method Based on Features[J];JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY;2000-03
9 YAN Qing dong, WEI Wei (National Key Lab of Vehicular Transmission, Beijing Institute of Technology, Beijing100081, China);Numeric Simulation of Single Passage Ternary Turbulence Model in Hydraulic Torque Converter[J];北京理工大学学报(英文版);2003-02
10 ZHU Ya qun 1, XU Wei li 1, YANG Yu ying 2, LIN Zhong qin 1(1. Shanghai Jiaotong University, Shanghai 200030, China; 2. Harbin Institute of Technology, Harbin 150001, China);Key techniques for mindlin shell element during sheetmetalling simulation[J];Material Science and Technology;2000-03
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 CUI Ling-jiang(Harbin Institute of Technology at Weihai Department of Materials Science and Engineering, Weihai 264209,China);Control of deforming trend in auto cover stamping process[J];Material Science and Technology;2004-04
2 DIAO Ke-shan1,CHEN Xin-ping1,JIANG Hao-min1,CHEN Qing-xin1,SHI Lin2 (1.Institute,Baoshan Iron Steel Co.,Ltd.,Shanghai 201900,China;2.Dongfeng Nissan Passenger Vehicle Company,Guangzhou 510800,China);Study on drawing fracture in round corner of side-frame auto panel and influence factors[J];Forging & Stamping Technology;2008-02
3 ZHANG Shi-hong,CHENG Xing-ye,TANG Jie(Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China);Design and optimization of drawbead of automotive panels by FE simulation[J];Forging & Stamping Technology;2008-06
4 PENG Bi-you1,HU Teng1,XIAO Bing1,2,LONG Ling2,YIN Guo-Fu2 (1. School of Materials Science and Engineering,Xihua University,Chengdu 610039,China; 2. School of Manufacturing Science and Engineering,Sichuan University,Chengdu 610065,China);Research on calculation method of the drawbead restraining force based on simulation[J];Forging & Stamping Technology;2009-06
5 WANG Yue,FU Jian,ZHU Mei-yun,PENG Bi-you,LI Shan-qiang(School of Material Science and Engineering,Xihua University,Chengdu 610039,China);Drawing wrinkling analysis and solution of 125 motorcycle tank bottom shell[J];Forging & Stamping Technology;2010-02
6 DIAO Ke-shan1 JIANG Hao-min1 CAO Meng2 CHEN Xin-ping1 (1.Automobile Steel Research Institute,Baoshan Iron and Steel Co.,Ltd.,Shanghai 201900,China;2.Sales Department,Baosteel-NSC/Arcelor Automotive Steel Sheets Co.,Ltd.,Shanghai 201900,China);Springback analysis and control of DP600 AHSS part based on CAE technology[J];Forging & Stamping Technology;2010-05
7 ZHU Hong-chuan,LI Rong-feng,YAN Long(Research and Development Center of Wuhan Iron and Steel Corp.,Wuhan 430080,China);Influence of temperature and R/t on draw bead restrain force[J];Forging & Stamping Technology;2011-01
8 ZHENG Hui1,2,MENG Xiang-tao3,ZHANG jia4,HAN Ying-jie3,TU Chun-hu3,ZHAO Wen-xue3(1.School of Aerospace Engineering,Shenyang Aerospace University,Shenyang 110136,China;2.State Key Laboratory of Rolling and Automation,Northeastern University,Shenyang 110004,China;3.Shenyang Airplane Company,Ltd.,Shenyang 110034,China;4.Dalian Luanyi Precision Engineering Co.,Ltd.,Dalian 116600,China);Case-based die design of typical automobile body panel[J];Forging & Stamping Technology;2011-03
9 DU Weimin, YUAN Guoding, CHEN Wei(Jiangsu University,Zhenjiang 212013,Jiangsu China);The Integrated Design of Auto Panel Die-Face with CAD/CAE[J];;2005-01
10 SUN Yu, WANG Yilin (State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074,Hubei China);Research on Die-face Design for Automotive Panels[J];China Metal Forming Equipment & Manufacturing Technology;2007-01
China Proceedings of conference Full-text Database 3 Hits
1 ;The Drawbead's Setting and Numerical Simulation in Automobile Cover Forming Based on Dynaform[A];[C];2009
2 ;NV200车型翼子板冲压工艺解析与模具套数优化[A];[C];2012
3 Mayunhui Wangxingchi Lixining Licheng Ruanpeiju;AIRCRAFT SKIN PARTS DIGITAL MANUFACTURING AND TESTING TECHNOLOGY RESEARCH[A];[C];2013
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 Li Yaochen(Department of Civil Engineering,Shanghai Instituted of Ralilway Technology,Shanghai 200333,China);FINITE ELEMENT SIMULAIIO OF SHEET METAL FORMING PROCESS[J];ACTA MECHANICA SINICA;1995-03
2 Wu Yongguo; Li shangjian; Li zhigang ;Xiao jingrong(Die Technology National Laboratory Huazhong University of Science and Technology 430074);EXPLICIT ALGORITHOM OF FINITE ELEMENT ANYLSIS FOR METAL FORMING PROCESS[J];JOURNAL OF PLASTICITY ENGINEERING;1995-03
3 Shengping Wang (Currently: Guest Researcher in the Dept. of Mechanical Engineering,Osaka Institute of Technology,5-16-1, Omiya, Asahi-ku, OSAKA, 535, JAPAN);THE SHEET FORMING SIMULATION TECHNOLOGY AND ITS DEVELOPMENT IN JAPAN[J];JOURNAL OF PLASTICITY ENGINEERING;1996-02
4 Ye You Peng Yinghong Ruan Xueyu (Shanghai Jiao Tong Univ 200030);THE KEY TECHNOLOGY AND DIFFICULTY IN NUMERICAL SIMULATION OF SHEET FORMING[J];JOURNAL OF PLASTICITY ENGINEERING;1997-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved