Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2002-06
Add to Favorite Get Latest Update

Study on one-pass deep drawing spinning of cups

South China University of Technology Xia Qinxiang Ruan Feng Kyoto University Susumu Shima Hidetoshi Kotera Daifu Yasuhuku  
This paper deals with an investigation into the characteristics of the one-pass deep drawing spinning of cups in order to replace the traditional deep drawing and multi-path spinning processes, so that the working procedures and the manufacturing costs can be reduced remarkably. Forming conditions studied in this paper are the material property, the feed rate of the roller per revolution .f., the nominal deep drawing ratio .m., and the relative clearance between the roller and mandrel .δ.. It is thereby shown that the axial components of the spinning force .Pa. is larger than the radial components of the spinning force .Pr. in the initial stage of the forming, and reverse is true in the later stage. The variations of the nominal thickness strains .ε. are similar to those in the ordinary deep drawing except the area near the cup opening. The forming limit diagrams and the ranges of the successful spinning for various process parameters are obtained also in this paper.
【CateGory Index】: TG376
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 8 Hits
1 Xia Qinxiang Ruan Feng (South China University of Technology);Effect of the forming parameters on the spinning force of the one-path deep drawing spinning of cups[J];Forging & Stamping Technology;2004-01
2 DONG Hong-bo,WANG Gao-chao (School of Materials Science and Engineering,Nanchang Hangkong University,Nanchang 330063,China);Spin-forming numerical simulation of cup-shaped inner meshing gear[J];Forging & Stamping Technology;2009-04
3 ZHANG Qing-feng1,JIA Ping1,ZHOU Xu-dong2,MU Xin1,FANG Shi-jie1(1.Department of Mechanical and Electrical Engineering,Luoyang Institute of Science and Technology,Luoyang 471023,China;2.Department of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471003,China);Research development of incremental sheet metal forming[J];Forging & Stamping Technology;2010-02
4 LUO Du-yu1,XIA Qin-xiang2,SUN Ling-yan 2(1.Mechanical and Electrical Engineering Department,Guangdong Polytechnic College,Guangzhou 510520,China;2.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China);Cup-shape blank design of inner-gear spinning[J];Forging & Stamping Technology;2010-02
5 ZHANG Qing-feng1,JIN Wen-zhong1,ZHOU Xu-dong2(1.Department of Mechanical and Electrical Engineering,Luoyang Institute of Science and Technology,Luoyang 471023,China;2.Department of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471003,China);Numerical simulation and process testing of box part incremental deep drawing[J];Forging & Stamping Technology;2011-01
6 XIA Qin xiang, RUAN Feng (Institute of Mechanical Engineering, South China University of Technology,Guangzhou 510640,China);Effect of the Roller Shape on the One-Path Deep Drawing Spinning of Cups[J];Metal Forming Technology;2002-06
7 LUO Du-yu1, XIA Qin-xiang2(1.Mechanical and Electrical Engineering Department,Guangdong Polytechnic College,Guangzhou 510520,China;2.School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640,China);Research on the Processing Parameters of Cup-shaped Blank Spinning Based on Orthogonal Experiment[J];Journal of Netshape Forming Engineering;2010-02
8 LI Xiao-man;XIAO Su-hua;Department of Mechanical and Electrical Engineering,Guangzhou City Polytechnic;;Experimental research on one-step drawing and spinning of thin-walled cup[J];Die & Mould Industry;2014-10
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 TANG Quan-bo1, HUANG Shao-dong2, WU Tai-bin1 ( 1. Chongqing Technology and Business University, Chongqing 400067, China; 2. No.59 Institute of China Ordnance Industry, Chongqing 400039 , China);Application analysis of magnesium alloys in weapon components[J];Ordnance Material Science and Engineering;2007-02
2 ZHAO Xin GAO Yuwei NAN Yun JING Tianfu (Key Lab. of Metastable Materials Science and Technology,Hebei;Departement of Materials Science and Technology,Yanshan University,Qinghuangdao 066004,P.R.China);Severe Plastic Deformation Methods for Bulk Nanostructured Materials[J];Materials Review;2003-12
3 XUE Ke-min, JIANG Shu-yong, KANG Da-chang (School of Materials Science and Engineering , Harbin Institute of Technology Harbin, 15001 China);Power spinning deformation of thin-walled cylinders with longitudinal inner ribs[J];Material Science and Technology;2002-03
4 XU Wen-chen, SHAN De-bin, LU Yan,LI Chun-feng (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China,);Research on the multi-pass shear spinning technology of small-angle conical workpieces[J];Material Science and Technology;2004-01
5 LIU Jin-song,ZHANG Shi-hong, ZENG Yuan-song, LI Zhi-qiang, REN Li-mei ( Institute of Metal Research, Chinese Academy of Sciences,Shenyang 110016, China, Beijing Aeronau-tical Manufacturing Technology Research Insdtutel, Beijing 100024, China; Shenyang Ligong University, Shenyang 110168,China);Simulation of incremental formingon integral panel skin with grid-type ribs[J];Material Science and Technology;2004-05
6 ZHANG Jin-hui,ZHAN Mei,YANG He,XU Yin-li,MA Fei(College of Materials Science & Engineering,Northwestern Polytechnical University,Xi'an 710072,China);Influence of process parameters on spinning force and wall thickness difference of shear spinning[J];Materials Science and Technology;2007-02
7 XU Yin-li,ZHAN Mei,YANG He,ZHANG Jin-hui,MA Fei(College of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072,China);Springback law analysis of cone spinning using 3D FEM[J];Materials Science and Technology;2008-02
8 Zhou Zhaoyao;Lu Yan;Zhao Xianmin;Xue Kemin;Zhan Lijun;Teng Yun(Harbin Institute of Technology)(Beijing 239 Factory);Stepped Spinning Experimental Study on Cylindrical Workpieces[J];MATERIAL SCIENCE AND TECHNOLOGY;1995-02
9 Ke LU(State Key Laboratory for RSA, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110015, China)Jian LULASMIS, University of Technology of Thoyes, 10000, Troyes, France);Surface Nanocrystallization (SNC) of Metallic Materials-Presentation of the Concept behind a New Approach[J];材料科学技术(英文版);1999-03
10 Yang Yanhui, Liu Dong, He Ziyan, Luo Zijian (Northwestern Polytechnical University, Xi’an 710072, China);Multi-Objective Preform Optimization Using RSM[J];Rare Metal Materials and Engineering;2009-06
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Qing-feng1,JIN Wen-zhong1,ZHOU Xu-dong2(1.Department of Mechanical and Electrical Engineering,Luoyang Institute of Science and Technology,Luoyang 471023,China;2.Department of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471003,China);Numerical simulation and process testing of box part incremental deep drawing[J];Forging & Stamping Technology;2011-01
2 ZHONG Jiang-jing,LIANG Shi-hong(Mechanical and Electrical Engineering Department,Suzhou Institute of Industrial Technology,Suzhou 215104,China);Trimming motion analysis and key part design of floating trimming die[J];Forging & Stamping Technology;2011-06
3 YANG Bao-jian1,XIA Qin-xiang1,CHENG Xiu-quan2(1.School of Mechanical and Automotive Engineering, South China University of Technology,Guangzhou 510640,China; 2.Guangzhou Civil Aviation College,Guangzhou 510403,China);Investigation on fabrication of ultrafine-grain tubular part through power spinning[J];Journal of Functional Materials;2012-S2
4 LUO Du-yu1, XIA Qin-xiang2(1.Mechanical and Electrical Engineering Department,Guangdong Polytechnic College,Guangzhou 510520,China;2.School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640,China);Research on the Processing Parameters of Cup-shaped Blank Spinning Based on Orthogonal Experiment[J];Journal of Netshape Forming Engineering;2010-02
5 WANG Hong-ji,CHEN Chen,XU Ying-qiang,WANG Qi-shan,HAN Ying;Technical parameter optimization about spinning of double conical parts without mandrel[J];Die and Mould Technology;2011-03
6 Yang Bao-jian1 Xia Qin-xiang1 Cheng Xiu-quan2 Xiao Gang-feng1(1.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China; 2.Department of Aircraft Maintenance Engineering,Guangzhou Civil Aviation College,Guangzhou 510403,Guangdong,China);Deformation Mechanism of Nano/Ultrafine Grained Cylindrical Parts Fabricated by Power Spinning[J];Journal of South China University of Technology(Natural Science Edition);2013-03
7 Li Wei Li Heng Liu Quankun(School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);Key Technical Analysis of Pulley Spinning Forming[J];Journal of Mechanical Transmission;2013-08
8 MAO Xianchang;YANG Lianfa;LUO Daisong;LIU Renyi;School of Mechanical & Electronic Engineering,Hezhou University;School of Mechanical & Electrical Engineering,Guilin University of Electronic Technology;Physics & Mechanical & Electronic Engineering Department,Hechi University;;Thickness Analysis of Magnesium Alloy Square Parts with Segmented Blank Holder in Radial Pressure Deep Drawing[J];Machine Tool & Hydraulics;2014-02
9 Wen Pengfei;Liu Yu;Wang Wei;School of Mechanical Engineering and Automation,Xihua University;;The Numerical Analysis for Local Forming Limit of Sheet Metal[J];Mechanical Science and Technology for Aerospace Engineering;2014-06
10 LI Xiao-man;XIAO Su-hua;Department of Mechanical and Electrical Engineering,Guangzhou City Polytechnic;;Experimental research on one-step drawing and spinning of thin-walled cup[J];Die & Mould Industry;2014-10
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved