Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2004-01
Add to Favorite Get Latest Update

Effect of the forming parameters on the spinning force of the one-path deep drawing spinning of cups

Xia Qinxiang Ruan Feng (South China University of Technology)  
The effects of the forming parameters on the spinning force of the one\|path deep drawing spinning of cups are analyzed in this paper. The forming parameters used for the experiment were: the rotating speed of the mandrel n , characteristics of the material, the feed rate of the roller f , the nominal drawing ratio m , and the relative clearance between the roller and the mandrel C , etc. The results show that the spinning force is affected in varying degrees by all of the forming parameters except n , and the variation characters of the spinning force are also affected by the necking phenomena accruing on the workpiece during deformation.
【CateGory Index】: TG376
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 1 Hits
1 LUO Du-yu1, XIA Qin-xiang2(1.Mechanical and Electrical Engineering Department,Guangdong Polytechnic College,Guangzhou 510520,China;2.School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640,China);Research on the Processing Parameters of Cup-shaped Blank Spinning Based on Orthogonal Experiment[J];Journal of Netshape Forming Engineering;2010-02
Chinese Journal Full-text Database 1 Hits
1 South China University of Technology Xia Qinxiang Ruan Feng Kyoto University Susumu Shima Hidetoshi Kotera Daifu Yasuhuku;Study on one-pass deep drawing spinning of cups[J];Forging & Stamping Technology;2002-06
Chinese Journal Full-text Database 10 Hits
1 PAN Er-shun,XU Xiao-yun,XI Li-feng(School of Mechanical and Power Engrineering.,Shanghai Jiao tong University,Shanghai 200030,China);Robustness design of die for V-shape stamping process based on finite element and taguchi design of experiment[J];Materials Science and Technology;2008-05
2 Tang Xiong; Xu Pin; Liu Zhuozhi (Mechanical Engineering Department,Changsha Railway University,Changsha, 410075 );The Development of Computer Aided Process Planning System for Rolling Stock Punching Parts[J];JOURNAL OF CHANGSHA RAILWAY UNIVERSITY;1996-04
3 Qiu Jianghong,Niu Dongbao (Chinese Airborne Missile Academy,Luoyang 471009,China);Design of the Drawing Dies for Economy Material[J];Electromachining & Mould;2008-04
4 CHENG Xiu-quan~1,XIA Qin-xiang~2(1.Guangzhou Civil Aviation College,Guangzhou Guangdong 510403,China;2.College of mechanical Engineering South China University of Technology,Guangzhou Guangdong 510640,China);Stamping technology and die design of the dust cover for the brake hub of the automobile axle[J];Forging & Stamping Technology;2005-06
5 ZHA Guang-cheng,JIA Li-li(Material College of Nanjing University of Technology,Nanjing Jiangsu 210013,China);Study on the automatic system of typical 3D punching-mould design[J];Forging & Stamping Technology;2005-06
6 ZHOU Chi,HUANG Zhen-yuan,RUAN Feng(School of Mechanical Engineering,South China University of Technology,Guangzhou Guangdong 510641,China);Applying fuzzy sets to the recognition of stamping features[J];Forging & Stamping Technology;2006-04
7 LI He-ping(Institute of Technology,Jinggangshan College,Ji'an Jiangxi 343009,China);Research on new technology of spark plug forming[J];Forging & Stamping Technology;2006-05
8 ZUO Hong1,LIU Geng-wu2(1.College of Mechanical Engineering,Yanshan University,Qinhuangdao 066001,China;2.Department of Mechanical and Electrical Engineering,Hunan Railway Professional Technology College,Zhuzhou 412001,China);Die design and mechanics analysis for riveting product used by flanging technology[J];Forging & Stamping Technology;2008-05
9 DONG Hong-bo,WANG Gao-chao (School of Materials Science and Engineering,Nanchang Hangkong University,Nanchang 330063,China);Spin-forming numerical simulation of cup-shaped inner meshing gear[J];Forging & Stamping Technology;2009-04
10 ZHANG Qing-feng1,JIA Ping1,ZHOU Xu-dong2,MU Xin1,FANG Shi-jie1(1.Department of Mechanical and Electrical Engineering,Luoyang Institute of Science and Technology,Luoyang 471023,China;2.Department of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471003,China);Research development of incremental sheet metal forming[J];Forging & Stamping Technology;2010-02
China Proceedings of conference Full-text Database 4 Hits
1 Zha GuangCheng, Jia LiLi (Nanjing University of Technology 210013);study on the automatic system of typical 3D punching-mould design[A];[C];2005
2 ;Research on three different forming technologies used in one kind of parts[A];[C];2008
3 LIU Zhiyun YANG Guotai HUANG Juhua YANG Xuechun Nanchang University,Nanchang 330029 China;The stress-strain analysis of narrow strips in plastic bending[A];[C];2004
4 ;薄板回转体的成形[A];[C];2001
Chinese Journal Full-text Database 10 Hits
2 Sun changguo ; Yu Datai; Hu Jianzhong; Ma Zhenping; Li Yu( 1) Robot Research Institute, UST Beijing, Beijing 100083, China 2) 12th Research Institute, MEI, Beijing 100016, China);^Self-learning Motion Control of Spinning Machine[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1998-05
3 KANG Da-chang,LI Mao-sheng,CHEN Yu(School of Material Science and Engi neering,Harbin Institute of Technology,Harbin150001,China);A study of force and power in ball spinning[J];Material Science and Technology;2002-02
4 XU Wen-chen, SHAN De-bin, LU Yan,LI Chun-feng (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China,);Research on the multi-pass shear spinning technology of small-angle conical workpieces[J];Material Science and Technology;2004-01
5 ZHANG Jin-hui,ZHAN Mei,YANG He,XU Yin-li,MA Fei(College of Materials Science & Engineering,Northwestern Polytechnical University,Xi'an 710072,China);Influence of process parameters on spinning force and wall thickness difference of shear spinning[J];Materials Science and Technology;2007-02
6 Lu Mei;Qian Zhiping; Li Hongbo;Wang Jiaxun (The College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004),;Thinning Spinning of Uniform Strength Spoke[J];JOURNAL OF YANSHAN UNIVERSITY;1998-04
7 Jinan Foundry & Metalforming Machine Research Institute Wang Qiang Harbin Institute of Technology Z.R.Wang;Analysis of the Blank Wrinkling in Conventional Spinning Process[J];Forging & Stamping Technology;1992-05
8 Northwestern Polytechnical Univresity L i Kezhi L i Hejun Harbin Institute of Technology Xue Kemin Lu Yan;Influence of process parameters on residual stress distribution in backward tube spinning[J];Forging & Stamping Technology;1997-04
9 Yanshang University Zhang Tao Lin GangBeiman Special Steel Co.Ltd. Zhou Jinglong;Three dimension FEM numerical simulation of tube necking-in spinning process[J];Forging & Stamping Technology;2001-05
10 Shanghai Jiaotong University Lin Xinbo Zhai Fubao Zhang Zhiliang Ruan Xueyu;Research on stagger spinning defects of tube parts by FEM[J];Forging & Stamping Technology;2002-04
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Li-juan1,ZHOU Hong-wei2,HAN Yun2,CHANG Hai-ping2,CHEN Zhi2(1.Department of Environmental Engineering,Environment Management College of China,Qinhuangdao 066004,China;2.Product Development Department,Dicastal Wheel Manufacturing Co.,Ltd.,Qinhuangdao 066003,China;);Requirement analysis of spin casting aluminum wheel on spinning equipment[J];Forging & Stamping Technology;2010-04
2 CHANG Haiping(Product Development Dep.,Dicastal Wheel Manufacturing Co.,Ltd.,Qinhuangdao 066003,Hebei China);A cast spinning process for aluminum alloy wheel hub[J];China Metal Forming Equipment & Manufacturing Technology;2012-04
3 HE Wei-jun1,SONG Hong-wu1,2,CHANG Hai-ping 2,LI Chang-hai2,ZHANG Shi-hong1(1.Institute of Metal Research Chinese Academy of Sciences,Shenyang 110016,China;2.Citic Dicastal Wheel Manufacture Co.,Ltd.,Qinhuangdao 066003,China);Numerical Simulation and Process Optimization of Hot Spinning Process for Cast-spinning Wheel[J];Journal of Netshape Forming Engineering;2011-02
4 LIU Zhi-chong1,CHANG Hai-ping1,ZHANG Li-juan2(1.Dicastal Wheel Manufacturing Co.,Ltd.,Qinhuangdao 066003,China;2.Department of Environmental Engineering,Environment Management College of China,Qinhuangdao 066004,China);Multi-factor Analysis of A356 Aluminum Alloy Wheel on the Spinning Process[J];Journal of Netshape Forming Engineering;2012-03
5 WANG Hong-ji,CHEN Chen,XU Ying-qiang,WANG Qi-shan,HAN Ying;Technical parameter optimization about spinning of double conical parts without mandrel[J];Die and Mould Technology;2011-03
6 SHEN Guo-zhang1, ZHAO Meng1, TANG Ji-ping2, QU Fang2, XUE Ke-min1 (1.School of Materials Science and Engineering,Hefei University of Technology, Hefei 230009, China; 2.Jiangsu Nantong Fuleda Vehicle Accessory Component Co., Ltd., Nantong 226300, China);Simulation and Optimization on the Forming of Cylinder of Belt Pulley by Shovel Spinning Technology[J];Journal of Netshape Forming Engineering;2012-06
7 Li Wei Li Heng Liu Quankun(School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);Key Technical Analysis of Pulley Spinning Forming[J];Journal of Mechanical Transmission;2013-08
8 CHEN Jia WAN Min LI Wei-dong(School of Mechanical Engineering and Automation,Beihang University,Beijing 100083 China)XU Cheng-xi XU Xu-dong HUANG Zhen-biao(Chengdu Aircraft Industrial Co.Ltd.,Chengdu 610092 China);Design of the involute trace of multi-pass conventional spinning and application in numerical simulation[J];Journal of Plasticity Engineering;2008-06
9 YANG Jei1,MA Shi-cheng2,WU Fu-jia1,2(1 School of Mechatronic Engineering,North University of China,Taiyuan 030054,China;2 Aerospace Research Institute of Special Material and Processing Technology,Beijing 100074,China);Status of appliance and trends of numerical simulation in spinning technique[J];Modern Manufacturing Engineering;2011-01
10 KONG Ling①,ZHANG Lijuan②,CHANG Haiping③,LI Changhai③(①College of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,CHN;②Department of Environmental Engineering,Environment Management College of China,Qinhuangdao 066004,CHN;③Product Development Dept,Dicastal Wheel Manufacturing Co.,Ltd.,Qinhuangdao 066003,CHN);Study on Al-alloy wheel spinning die and the blank holder mode[J];Manufacturing Technology & Machine Tool;2011-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved