Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2005-05
Add to Favorite Get Latest Update

Status and development of the precise progressive die key technology of the IT products

HUANG Zhen-yuan~(1),RUAN Feng~(1),ZHANG Han~(1),XIAO Min~(2) (1.School of Mechanical Engineering,South China University of Technology Guangzhou Guangdong 510640,China;2.DongguanYidong Electron Co.ltd,Dongguan Guangdong 523125,China)  
The increasing demand for IT products and its development direction toward "light,thin,short and small" create many difficulties for designing and manufacturing the precise progressive die of the IT products,which blocks the development situation of IT industry.Aiming at the characteristic of Ultrathin,microsize,high precision,difficult forming and large batch production of IT products,this paper discusses the key technologies for precise progressive die of the IT products,such as the design and manufacture of the progressive die,high-speed and high-efficiency industrialization of the IT products and proposes many solutions.To solve this key technology,we must start from the system engineering aspect,considering all influence facts,such as mold design,mold material,mold manufacturing,high speed stamping,increasing mold life roundly,product quality and stamping speed,etc.
【Fund】: 2004粤港关键领域重点突破项目(2004A10402002)
【CateGory Index】: TG385.2
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 Huang Zhenyuan,Guo Lei,Zhou Chi,Ruan Feng (South China University of Technology,Guangzhou 510640,China);Fracture Failure Investigation of WC-Co Cemented Carbides Precision Progressive Die[J];Electromachining & Mould;2007-03
2 WANG Bo,GUO Lei,HUANG Yu-ping,RUAN Feng (School of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China);Research on structure design standardization for precision progressive die[J];Forging & Stamping Technology;2008-03
3 CHEN Huai-min(School of Mechanical Engineering,Jimei University,Xiamen 361021,China);Research on high speed stamping die precision-oriented machine[J];Forging & Stamping Technology;2010-06
4 GUO Lei,HUANG Zhenyuan,HUANG Minfei,RUAN Feng(School of Mechanical Engineering South China Univ.of Tech.,Guangzhou 510640,Guangdong China);Stress Analysis of Thin Sheet Blanking Based on Numerical Simulation[J];China Metal Forming Equipment & Manufacturing Technology;2006-06
5 GONG Xin,WANG Lei(School of Mechatronics Engineering,Taizhou University,Taizhou,318000,Zhejiang China);Design of multi-position progressive die for slim pin of connector terminal[J];China Metal Forming Equipment & Manufacturing Technology;2011-03
6 HUANG Zhen-yuan1,LUO Jian-dong1,LIU Hui-ping2(1.School of Mechanical and Automobile Engineering,South China University of Technology,Guangzhou 510640,China; 2.77569 Troop of Chinese People's Liberation Army,Lasa 850000,China);New manufacturing method of projecting jacket used for slim punch of small holes blanking[J];Forging & Stamping Technology;2012-05
7 SUN Li-jun1,HUANG Zhen-yuan2,ZHANG Han2,RUAN Feng2(1.Department of Mechanical Engineering,Guangdong Technical College of Water Resources and Electric Engineering,Guangzhou 510925,China;2.School of Mechanical and Automotive Engineering, South China University of Technology,Guangzhou 510641,China);Theory research on rupture limit prediction for thin plate[J];Forging & Stamping Technology;2013-02
8 Ruan Feng Huang Zhen-yuan Zhou Chi Wang Bo(School of Mechanical Engineering,South China Univ.of Tech.,Guangzhou 510640,Guangdong,China);Review of High-Speed & Precise Progressive Dies of IT Products[J];Journal of South China University of Technology(Natural Science Edition);2007-10
9 CHEN Yu-fang 1,CHEN Wei 2,HUANG Zhong-fu 2,ZONG You-san 3,QI Wei-gen 3(1 Mechanical Engineering School,Wenzhou Vocational & Technical College,Wenzhou 325035,China)(2 Die and Mould Technology Institute,Jiangsu University,Zhenjiang 212013,China)(3 Zhenjiang Chuanshan Mould Base Factory,Zhenjiang 212013,China);Study on Deflection of Terminal in Multi-Blanking of Precision Progressive Die[J];Machinery Design & Manufacture;2012-06
10 HUANG Zhen-yuan,LIU Wen-juan,ZHOU Chi,RUAN Feng(School of Mechanical Engineering,South China University of Technology,Guangzhou,Guangdong 510640,China);Wear of carbide alloy progressive die in high-speed stamping[J];Die & Mould Industry;2007-01
【Citations】
Chinese Journal Full-text Database 2 Hits
1 Li Guanghua(20);The Problems Existing in High-Speed Stamping of the Multi-Position Progressive Die and the Measures[J];DIE & MOULD INDUSTRY;2000-05
2 LIANG Pei zhi,LI Chang, LI Jian jun et al.;Research on Standard Parts Library in Progressive Die Al Design[J];Die and Mould Technology;2003-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 WANG Bo,GUO Lei,HUANG Yu-ping,RUAN Feng (School of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China);Research on structure design standardization for precision progressive die[J];Forging & Stamping Technology;2008-03
2 CHEN Huai-min(School of Mechanical Engineering,Jimei University,Xiamen 361021,China);Research on high speed stamping die precision-oriented machine[J];Forging & Stamping Technology;2010-06
3 FU Xin,CHEN Fuxiao,CHANG Qunfeng,HU Wenzhuang(Material Science&Engineering College Henan University of Science&Technology,Luoyang471003,Henan China);Application of SolidWorks in Establishment of Standard Parts Data of Progressive Die[J];;2003-05
4 DENG Ming1, JIA Jinzhou2(1.Chongqing Institute of Technology,Chongqing 400050,China; 2.Factory of Xinan Vehicle Manufacture,Chongqing 400050,China);Design of the Progressive Die of the Electric Insert Element[J];;2004-06
5 GONG Xin,WANG Lei(School of Mechatronics Engineering,Taizhou University,Taizhou,318000,Zhejiang China);Design of multi-position progressive die for slim pin of connector terminal[J];China Metal Forming Equipment & Manufacturing Technology;2011-03
6 HUANG Zhen-yuan1,LUO Jian-dong1,LIU Hui-ping2(1.School of Mechanical and Automobile Engineering,South China University of Technology,Guangzhou 510640,China; 2.77569 Troop of Chinese People's Liberation Army,Lasa 850000,China);New manufacturing method of projecting jacket used for slim punch of small holes blanking[J];Forging & Stamping Technology;2012-05
7 ZHOU Sheng,LI Jian-jun(Huazhong University of Science & Technology, Wuhan430074, China);Association design method research of plate holes in progressive die[J];Machine Development;2005-09
8 ZHAO Wan-chong,LI Jian-jun,XIAO Xiang-zhi(National Leading Lab for Plastic Forming Simulation & Die Technology,Huazhong University of Science & Technology,Wuhan,Hubei 430074,China);Correlated design of standardized parts and components in CAD system for progressive die[J];Die & Mould Industry;2006-05
9 GU Wei-liang,CHEN Wei,BEI Jian-wei,CHEN Hong-hui (School of Mechanical Engineering,Jiangsu University,Zhenjiang,Jiangsu 212013,China);Optimization of pressure center of progressive die based on torque equilibrium and numerical simulation[J];Die & Mould Industry;2008-09
10 NIU Qiang,LIU Wei,MEI Qiong-feng,et al;Research and development of plastic injection mold standard parts library based on UG[J];Die and Mould Technology;2008-06
China Proceedings of conference Full-text Database 1 Hits
1 Quan Lu-bin,He Long,Guo Hui (Tianjin Zhi Cheng Motor Dies Company Limited(Subsidiary of Tianjin Motor Dies Company Limited).Tianjin 300308,China);UG Parametric Design on Standard Component[A];[C];2012
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Liu Zongde ̄a;Feng Shuping ̄b;Sun Chenwei ̄b;Han Mingbao ̄a(a.Department of Mechanics, Peking University,beijing,100871,China)(b.Southwest Insitute of Fluid Physics,Chengdu 610003,China);STUDIES ON HIGH HEATING RATES APPARATUS[J];EXPLOSION AND SHOCK WAVES;1995-04
2 Liu Zongde; Feng Shuping; Zhang Ning;Han Mingbao; Sun Chengwei(North China Electric Power University, Beijing, 102206)(Southwest Institute of Fluid Physics, P. O. Box 523, 610003)( Department of Mechanics, Peking University, Beijing, 100871);STUDIES ON THERMO-SOFTENING OF THREE ALLOY UNDER SHORT TIME ELEVATED TEMPERATURE[J];EXPLOSION AND SHOCK WAVES;1996-02
3 Han Mingbao a,Liu Zongde b,Liu Yiguang a( a .Beijing University,Beijing,100871) ( b .the North Electric Power University of China,Beijing,100085);AN EXPERIMENTAL STUDY ON THE MECHANICAL BEHAVIOR OF A3 STEEL UNDER RAPID HEATING[J];EXPLOSION AND SHOCK WAVES;1999-01
4 PENG Chao qun,HUANG Bai yun,HE Yue hui (State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China);Effects of Rapid Heating Induction Heat Treatment on Microstructures and Mechanical Properties of TiAl based Alloy[J];Journal of Materials Engineering;2001-12
5 LIU Zongde (Noorth Electric Power University of China, Beijing 100085) LIU Yiguang HAN Mingbao (Peking University);MECHANICAL BEHMIORS OF PRELOADED A3 STEEL UNDER RAPID HEATING[J];CHINESE JOURNAL OF MATERIAL RESEARCH;2000-01
6 Wu Xinghua(Anhui Kaile Automoblie CO.,LTD,Fuyang 236112,China);The Design of High-Speed Progressive Dies for Carry to Cover the Plank[J];Electromachining & Mould;2006-05
7 Guo Xiaoming Zhao Huilin (College of Civil Engineering, Southeast University, Nanjing 210096, China);Study on contact problems in engineering structures[J];Journal of Southeast University (Natural Science Edition);2003-05
8 Harbin Institute of Technology Li Shucben.Cui Lingjiang Yu Lianzhong.Li Chunfeng;A Study on the Plastic Instability in Uniaxial Tesion of Sheet Metal[J];Forging & Stamping Technology;1989-01
9 WANG Ke-sheng 1,2,DONG Ding-fu 1,LI Wen-sheng 2 (1.School of Material Science and Engineering, Hefei University of Technology,Hefei Anhui 230009,China; 2. Yu King Hardware Co. Ltd.,Shenzhen Guangdong, 518103,China);New technology and progressive die design for twist forming pressure arm[J];Forging & Stamping Technology;2005-03
10 WAN Liang-hui*,XIE Han-bin (Shenyang Aeronautical Industry College, Institute of Aeronautic and Astronautic Engineering, Shenyang Liaoning 110032,China);Method of developing the 2D and 3D parametrization drawing database for stamping die standard-parts[J];Forging & Stamping Technology;2005-03
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 YAN Li-li,FANG Xian-shi,LIANG Yong-feng,YE Feng,LIN Jun-pin(State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China);Stamping Properties of Cold-rolled Fe-6.5%Si Alloy Sheet[J];Journal of Materials Engineering;2012-06
2 Zheng Fuqiang1,Zou Dan2,Zang Haitian3 (1.Hunan Boyun-dongfang Powder Metallurgy Co.,Ltd,Changsha 410012,China; 2.Nanjing Jinning Frock Co.,Ltd,Nanjing 210025,China);The Influence of Denatured Layer on the Properties of Cemented Carbides[J];Electromachining & Mould;2009-05
3 WANG Wan-xin(Mechanical and Electronic Engineering Department,Dezhou University,Dezhou 253023,China);Design of PLC control system in automatic fins-puncher[J];Forging & Stamping Technology;2009-05
4 FANG Ming-cai1,LI Hong-lin1,CHEN Bo-jie1,LI Jian-jun2,MAO Jun-ting3,XU Jian-kai3(1.School of Mechanical Engineering and Mechanics,Ningbo University,Ningbo 315211,China;2.Huazhong Universityof Science and Technology,Wuhan 430074,China;3.Ningbo Hongda Motor Die Co.,Ltd.,Ningbo 315333,China);Study on correlated design method of plate holes for progressive die based on library feature[J];Forging & Stamping Technology;2009-05
5 CHEN Huai-min(School of Mechanical Engineering,Jimei University,Xiamen 361021,China);Research on high speed stamping die precision-oriented machine[J];Forging & Stamping Technology;2010-06
6 MA Chun-yu,YUAN Jun-ping,BO Hai-rui(Jewelry Institute,Guangzhou Panyu Polytechnic,Guangzhou 511483,China);Effect of radial grinding depth on microcosmic crack tendency for cold working precision forging die steel[J];Forging & Stamping Technology;2011-06
7 WANG Jie,WANG Lei (1.School of Mechatronics Engineering,Taizhou University,Taizhou 318000,Zhejiang China);Analysis of Pressing Technology and Design of Multi-position Progressive Die of Contact Terminal[J];China Metal Forming Equipment & Manufacturing Technology;2010-02
8 LIN Zhichao,WANG Lei (School of Mechanical Engineering,Taizhou University,Taizhou 318000,Zhejiang China);Design of Precision Progressive Die for Connector Terminal[J];China Metal Forming Equipment & Manufacturing Technology;2010-03
9 CHEN Peiming,WANG Lei (School of Mechatronics Engineering,Taizhou University,Taizhou 318000,Zhejiang China);Analysis of Pressing Technology and Design of Multi-position Progressive Die for Contact Terminal of Fuse Cap[J];China Metal Forming Equipment & Manufacturing Technology;2010-03
10 WANG Jixun,WANG Lei (School of Mechatronics Engineering,Taizhou University,Taizhou,318000,Zhejiang China);Design of Multi-position Progressive Die for a Shell of USB[J];China Metal Forming Equipment & Manufacturing Technology;2011-02
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 Wang Binfang et al;A Study on the CAD Method for Progressive Dies Based on 3D Combined Parts[J];Die & Mould Industry;2001-07
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved