Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2006-01
Add to Favorite Get Latest Update

Database development of the standardized parts of moulds in Solidworks condition

GAO Ying-ying,ZHANG Yao-zong,LIANG Shi-hong(School of Material Science and Engineering,Henan University of Science & Technology,Luoyang Henan 471003,China)  
The standard entity models and size parameters for all kinds components in solidworks condition are set up with the help of VB,through calling API functions of solidworks and making use of technology of ADO.With the punch shank as an example,the process for developing the database of the standardized parts of moulds is introduced in detail.The techniques of the development on SolidWorks and the key techniques on the development of 3D standard-part library of moulds are introduced.The parameterization standardized parts of moulds,the parameter database of standardized parts of moulds and the structure and function of mutual interface of user are emphasized in this paper.It will be of a great value in the further development of solidworks and generalizing standardization technology of mould.
【Fund】: 河南省自然科学研究基金(0111040900);; 河南科技大学科学研究基金(200113)
【CateGory Index】: TP391.72
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 6 Hits
1 YE Xiao-feng,LI Jian-jun (State Key Laboratory of Material Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China);Research on the intelligent standard part library based on knowledge reusable scheme[J];Forging & Stamping Technology;2008-02
2 WANG Bo,GUO Lei,HUANG Yu-ping,RUAN Feng (School of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China);Research on structure design standardization for precision progressive die[J];Forging & Stamping Technology;2008-03
3 LI Dalei,LI Huiping(School of Mechanical Engineering,Zhengzhou University,Zhengzhou Henan 450001,China);Establishment of Special Fixture Parts Library and Computation of Location Error by SolidWorks[J];Machine Tool & Hydraulics;2010-03
4 Luo Jixiang1,Zhou Li1,Jiang Yuhua2,Huang Guoqing1,Zhang Shuiyong2(1.School of Logistics,Wuhan University of Technology,Wuhan,China;2.Wanfeng Auto Science and Technology Development Co.,Ltd.,Xinchang,China);Development of Standard Parts Library of Squeezing Casting Die[J];Special Casting & Nonferrous Alloys;2007-12
5 FANG Zhou,CAO Yan,Bai Yu(School of Mechatronic Engineering,Xi'an Technological University,Xi'an 710032,China);Jaw Clutch Standard Part Library Development based on Solid Works[J];Journal of Xi'an Technological University;2007-04
6 SONG Chunming,ZHANG Shiyong(Institute of Mechanic Engineering,Shaanxi University of Technology,Hanzhong 723003,CHN);Design of The Standard Die Set Library for Stamping Mould Based on SolidWorks[J];Manufacturing Technology & Machine Tool;2010-11
【Citations】
Chinese Journal Full-text Database 3 Hits
1 Central South University Chen Yueping Luo Yiping Yang Yue Wang Pingan;Development of 3D standard-part library of stamping die CAD in SolidWorks[J];Forging & Stamping Technology;2002-05
2 ZHU Chao-kuan (Yuzhou University,Chongqing,400033,China);Development of Standard Entity Library in Solidworks[J];Machine Design and Manufacturing Engineering;2002-03
3 CHI Yong 1 ,XIN Xuan-rong 1 ,GE Zhong-xin 2 ,LIU Ting 1 (1.Henan University of Science&Technology,Luoyang,Henan471003,China; 2.China Luoyang Float Glass Group,Luoyang,Henan471001,China);Development of the Database of the Standardized Parts of Dies and Moulds[J];Die & Mould Industry;2003-11
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Cui Cunyi(Material Engineering Department,Baotou Vocational & Technical College;Baotou Inner Mongolia, 014030);A Few Noticeable Problems in Blanking Die Designing of Thick Sheet Metal Punching[J];Journal of Baotou Vocational & Technical College;2006-01
2 Yu Wensheng1 Nie Lanqi2(1.Vehicle Engineering Department,Baotou Vocational & Technical College,Baotou Inner Mongolia 014030;2.Shandong Hongqi Electromechanical Ltd.Co.,Weifang Shandong 261031);Protecting and Lubricating Treatment of Stainless Steel under the Deep Drawing[J];Journal of Baotou Vocational & Technical College;2008-04
3 HUI Ye,LI Xiang,WANG Chang-hao,ZHANG Fu-ping(Shaanxi University of Science & Technology,Xi'an 710016,China);Parametric Design of Packaging Container Structure Based on SolidWorks[J];Packaging Engineering;2007-12
4 Xie Qingsong ; Hu Xingcai (The 712 Research Institute, CSIC, Wuhan 430064, China);Simple Drawing Mould Design of the Upper Cover[J];Marine Electric & Electric Technology;2003-05
5 SU Guang-yi(Engineering Department of Car Service,Changchun University,Changchun 130022,China);Pro-and-con packed craft for blind hole nail butt and mold design[J];Journal of Changchun University;2006-08
6 HUANG Yan-ping(Shanghai Electronic Information Institute,Shanghai 200000,China);New designing method about the warm extrusion mold[J];Journal of Changchun Institute of Technology(Natural Sciences Edition);2008-01
7 Zhang Zhimin Zhang Baohong Feng Zaixing (North China Institute of Technology, Taiyuan 030051) Dong Yanlan (Chinese Academy of Ordnance Sciences, Beijing 100081);Computer Simulation and Optimization of Axle Housing Upset extruding Process[J];MATERIAL SCIENCE AND TECHNOLOGY;1998-03
8 LIU Yu-xia(ChongQing industry school,Chongqing 400043,China);Parametrical design of Mechanical parts Based on Solidworks[J];Journal of Chongqing Vocational & Technical Institute;2006-02
9 Traffic College,Northeast Forestry University Ba Xingqiang Yu Jianguo;Design and Case Analysis of large Plate Elongation Cover on Urban Buses[J];Urban Public Transport;2008-05
10 FU Shuang-xue (Changsha Aeronautical Vocational and Technical College, Changsha Hunan 410124);The Exploration into Life in Mould Design and New Technology Application[J];Journal of Changsha Aeronautical Vocational and Technical College;2005-01
China Proceedings of conference Full-text Database 8 Hits
1 CHEN Yan1,GAO Lin 1 ,WU Xian-Zhi2,QIU Ting-Yu 2 ,REN Jing2 (1.Department of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics, Nanjing,210016,China; 2.Technology Integration Management Lab,Pegatron Corporation,Suzhou,215000,China);Research on Multistage Deep Drawing and Ironing of an Irregular Cup[A];[C];2009
2 ;模具制造精度控制[A];[C];2008
3 Zhang Shutang Niu Shuhao Chen Yankun Li Xiaopeng Lei yong Henan Benma Co.,Ltd.Changge 461500;Bend the Process of Wrinkling and Fracturing Analysis and Control Methods[A];[C];2008
4 WANG Wei, JI Xiao-min (Department of Mechanical and Instrumental Engineering, Xi'an University of Technology);The Establishment of Standard Part Library based on Feature in SolidWorks[A];[C];2004
5 PENG Cheng-yun,HU Jing-pei( School of Material Science and Engineering, Chongqing Institute of Technology, Chongqing 400050, China; School of Technology, Chongqing Radio and TV University, Chongqing 400050, China);Design of cropper handgrip seats in stamping figuration[A];[C];2005
6 ;中心管冲压工艺及模具设计[A];[C];2007
7 Xu Shengli Gong Xiaotao Wang Bo Li Yan Shi Xin (Xi,an Aeronautical Polytechnic Insititute,Xi,an Shaanxi 710089,China);Forming Limit of Ellipsoid-bottomed Conical Bodies[A];[C];2007
8 LI Ying-jie (Shanxi Changling Electronic Science&Technology Co.,Ltd,Baoji 721006,China);Formulation and Verification of Bending Coefficients in Range from 0° to 180°[A];[C];2011
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 LONG Ling (Mechanical Department, Chengdu Textile College, Chengdu 610023);Establishment of Standard - Part Stamping Die Library under SolidWorks[J];Journal of Chengdu Textile College;2006-02
2 SHI Jun-you(College of Mechanical and Electronic Engineering,Qingdao University of Science and Technology,Qingdao 266061,China);Variant Design and Automatic Assembly System Based on SolidWorks Under PDM Environment[J];Group Technology & Production Modernization;2005-04
3 YU Shan-ping WU Bin GUAN Li-na(College of Electromechanical & Information Engineering,Dalian Nationalities University,Dalian Liaoning 116605,China);Computer Aided Computation of Location Error for Typical Fixtures[J];Journal of Dalian Nationalities University;2006-03
4 ZHOU Mao jun 1,2 ,SU Tie ming 2,OU Zong ying 2 (1.Dept. of Mech. Eng., Dalian Inst. of Light Ind., Dalian 116034, China; 2.CAD Lab School of Mech., Dalian Univ. of Technol., Dalian 116024, China);Development of 3D mould standardized parts database using SolidWorks software[J];Journal of Dalian Institute of Light Inoustry;2001-04
5 Central South University Chen Yueping Luo Yiping Yang Yue Wang Pingan;Development of 3D standard-part library of stamping die CAD in SolidWorks[J];Forging & Stamping Technology;2002-05
6 WAN Liang-hui*,XIE Han-bin (Shenyang Aeronautical Industry College, Institute of Aeronautic and Astronautic Engineering, Shenyang Liaoning 110032,China);Method of developing the 2D and 3D parametrization drawing database for stamping die standard-parts[J];Forging & Stamping Technology;2005-03
7 HUANG Zhen-yuan~(1),RUAN Feng~(1),ZHANG Han~(1),XIAO Min~(2) (1.School of Mechanical Engineering,South China University of Technology Guangzhou Guangdong 510640,China;2.DongguanYidong Electron Co.ltd,Dongguan Guangdong 523125,China);Status and development of the precise progressive die key technology of the IT products[J];Forging & Stamping Technology;2005-05
8 LU Jun,ZHAO Zhi-guo(College of Mechanical and Electrical Engineering,Shaanxi University of Science and Technology,Xianyang,Shaanxi 712081,China);Automatic assembly of the die based on Solid Works[J];Forging & Stamping Technology;2007-01
9 YE Xiao-feng,LI Jian-jun (State Key Laboratory of Material Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China);Research on the intelligent standard part library based on knowledge reusable scheme[J];Forging & Stamping Technology;2008-02
10 FU Xin,CHEN Fuxiao,CHANG Qunfeng,HU Wenzhuang(Material Science&Engineering College Henan University of Science&Technology,Luoyang471003,Henan China);Application of SolidWorks in Establishment of Standard Parts Data of Progressive Die[J];;2003-05
【Secondary References】
Chinese Journal Full-text Database 7 Hits
1 WANG Wan-xin(Mechanical and Electronic Engineering Department,Dezhou University,Dezhou 253023,China);Design of PLC control system in automatic fins-puncher[J];Forging & Stamping Technology;2009-05
2 FANG Ming-cai1,LI Hong-lin1,CHEN Bo-jie1,LI Jian-jun2,MAO Jun-ting3,XU Jian-kai3(1.School of Mechanical Engineering and Mechanics,Ningbo University,Ningbo 315211,China;2.Huazhong Universityof Science and Technology,Wuhan 430074,China;3.Ningbo Hongda Motor Die Co.,Ltd.,Ningbo 315333,China);Study on correlated design method of plate holes for progressive die based on library feature[J];Forging & Stamping Technology;2009-05
3 CHEN Huai-min(School of Mechanical Engineering,Jimei University,Xiamen 361021,China);Research on high speed stamping die precision-oriented machine[J];Forging & Stamping Technology;2010-06
4 LIU De-fang1,TAN Gui-qing 2,WANG Bin1,WU Hong-pan3(1UGS College,Yancheng Institute of Technology,Yancheng 224001,China)(2School of Mechanical Engineering,Nantong University,Nantong 226019,China)(3School of Automobile and Traffic Engineering,Jiangsu University,Zhenjiang 212013,China);Research on model selection method for gating system based on bayesian inference[J];Machinery Design & Manufacture;2011-06
5 ZHOU Yun-feng,WANG Zong-yan,WU Shi-bin(Engineering Technology Research Center of CAD/CAM,North University of China,Taiyuan 030051,China);Standard Parts Standard Express Research and Application for Engineering Drawings from 3D Design Software[J];Coal Mine Machinery;2011-11
6 CHEN Huai-min(School of Mechanical Engineering,Jimei University,Xiamen 361021 China);Research on multi-position progressive die structure of split-level templates for hight speed stamping[J];Journal of Plasticity Engineering;2011-01
7 LI Ming-ming1,LUO Ji-xiang1,LUO Guo-jian1,CHEN yun1,XIE Wei-lian2(1.School of Logistics,Wuhan University of Technology,Wuhan 430063,China;2.Fuzhou Wealth Machinery Limited Company,Fuzhou 350000,China);Squeeze Casting Technics Numerical Simulation of Spray-gun[J];Journal of Wuhan University of Technology;2010-15
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 CHI Yong 1, XIN Xuan rong 1, GE Zhong xin 2, LIU Ting 1 (1 Henan University of Science & Technology, Luoyang 471003, China);The application of SolidWorks API in its further development[J];Machinery;2003-03
2 Yang Xinhua et al;The Establishment of the Standard part Database of the 3D Blanking Die Shaped Based on the Parameterized Characteristics[J];Die & Mould Industry;2001-07
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved