Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2008-05
Add to Favorite Get Latest Update

Finite element model analysis of giant hydraulic die-forging press frame

HUANG Ming-hui,DUAN Zhi-yong,ZHAN Li-hua,PENG Wei-bo(College of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China)  
The conception,theory and significance of finite element model analysis were studied.Taking 300 MN hydraulic die-forging press as the investigating object,the frame's model factors were analyzed based on MSC.Nastran finite element analysis software.Then the frame's original frequencies and model vibration modes were got for the former six steps,which were evaluated in detail by the working practice.According to these results,the stiffness distribution of the frame and the weakness points were gained.From the view of the man-machine engineering aspect,the influence of original frequencies on the people and environment was disscussed.
【Fund】: 国家重点基础研究发展计划(973计划)资助项目(2005CB724102)
【CateGory Index】: TG315.42
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 9 Hits
1 YAN Qing-song1,ZHANG Tie2,TONG Lei1(1.Department of Mechanical & Electrical Engineering,Guangdong Vocational College of Mechanical & Electrical Technology,Guangzhou 510515,China;2.College of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China);Body improvement of QA35Y-30 hydraulic combined punching and shearing machine[J];Forging & Stamping Technology;2010-04
2 ZHAI Qun-jie(China First Heavy Industries,Qiqihar 161042,China);Dynamic analysis and research of forging manipulator clamp[J];Forging & Stamping Technology;2010-05
3 WANG Li-wei,XIE Wen-ke,XUE Feng(Technology Center,Taiyuan Heavy Industry Co.,Ltd.,Taiyuan 030024,China);Finite element modal analysis of 125 MN high speed forging hydraulic press body[J];Forging & Stamping Technology;2010-06
4 HE Wen-bin1,2,ZENG Pan1,LIN Feng1,YAN Yong-nian1(1.Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China;2.Department of Electromechanical Science and Engineering,Zhengzhou University of Light Industry,Zhengzhou 450002,China);Finite element modal analysis of steel wire wound frame for 40 MN multi-cored hydraulic press[J];Forging & Stamping Technology;2011-02
5 ZHANG Yigong(Taiyuan Heavy Industry Co.,Ltd.,Technology Center,Taiyuan 030024,Shanxi China);Design and development of 80 MN double columns high speed forging hydraulic press in pre-stress structure[J];China Metal Forming Equipment & Manufacturing Technology;2011-03
6 YANG Jian-xin,WANG Zhen-hong(School of Mechatronical Engineering,Changchun University of Science and Technology,Changchun 130022,China);Design for the Structural Optimization of a Servo System Load Simulation Test Bench[J];Journal of Changchun University;2013-02
7 SHE Hai-bin1,ZHANG Xue-liang1,WEN Shu-hua1,LIAN Jin-hua2,CHEN Yong-hui1,LAN Guo-sheng1(1.College of Mechanical Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China; 2.Technology Center,Taiyuan Heavy Machinery Group Co.,Ltd.,Taiyuan 030024,China);Finite element modal analysis of 80 MN high speed forging hydraulic press[J];Forging & Stamping Technology;2013-02
8 FAN Bin1,2,LIU Ming1,LU Xin-jiang1,HUANG Ming-hui1(1.School of Mechanical and Electrical Engineering,Central South University,Changsha 410083; 2.College of Architecture and City Planning,Hunan City University,Yiyang 413000,China);Dynamic analysis of rigid-flexible coupled system for heavy forging press[J];Forging & Stamping Technology;2013-04
9 WANG Yong-qin1,LIU Jun-yi1,YAN Xing-chun1,HAN Bing-tao2,ZHANG Ying-jie2,ZHANG Jun2(1.The State Key Lab.of Mechanical Transmission,Chongqing University,Chongqing 400030,China;2.China National Heavy Machinery Research Institute Co,Ltd,Shanxi Xi'an 721000,China);Modal Analysis of the Whole Machine of 12.5 MN Twin Columns Pull-Down High Speed Forging Hydraulic Machine[J];Machinery Design & Manufacture;2013-02
【Citations】
Chinese Journal Full-text Database 1 Hits
1 CAO Yan-yan,ZHAO Deng-feng(School of Manufacturing Science and Engineering,Southwest University of Science and Technology,Mianyang 621010,China);Finite Element Modal Analysis Theory and Application[J];Mechanical Engineering & Automation;2007-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 XIANG Hua-ping(Nanjing Research Institute of Electronic Technology,Nanjing200039,China);A connective technology between hex and tetra based on topo translation[J];Journal of Anhui University(Natural Science Edition);2011-02
2 HUANG Hua, JIAO An chao (School of Vehicle & Transportation Engineering,Beijing Institute of Technology,Beijing 100081,China);Application of No-Contact Measuring by Laser in Modal Analysis of the oil-box of the Vehical[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2002-02
3 MA Bing-jie, FENG Hui-hua, LIAO Ri-dong, YAO Li-min (School of Mechanical & Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Modal Analysis of Engine Structure Based on the Modal Correlation and Model Modification[J];Vehicle & Power Technology;2006-02
4 TANG Qing-hong, WANG Xing-gui (Dept. of Artillery Engineering, Ordnance Engineering College, Shijiazhuang 050003, China);Approaches for Creating Fields by Importing Data in Patran[J];Ordnance Industry Automation;2006-04
5 Yang Jiahua; Chen Weifu; Huang Xudong (School of Mechanical Engineering and Applied Electronic Techmology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083 );Research on Identification of the Structural Interface Parameter of Machine Tool Bed with Column[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
6 ZHANG Liang-cheng,WANG Guo-quan,SUN Xiao-yun,GAO Yan(School of Electromechanical Engineering,Beijing Information Science and Technology University,Beijing 100192,China);Vibration modal analysis on the kart frame of BJ-2[J];Journal of Beijing Information Science & Technology University;2010-01
7 XIANG Sheng-hai,ZHANG Ping,LI Shi-peng,FANG Shu-zhou(School of Mechatronic Engineering,Beijing Institute of Technology,Beijing 100081,China);An Analysis on Faults in the Nozzle Throat Insert of a Pulse Motor[J];Transactions of Beijing Institute of Technology;2006-05
8 YU Xiaoqing,ZHOU Guangming(M O E Key Lab of Structure Mechanics and Control for Aircraft,Nanjing University of Aeronautics & Astronautics,Nanjing 210016);Effects of Temperature Change on the Tensile Strength of Double Lap Joints in Composites[J];Fiber Glass;2011-03
9 YANG Sheng1,MENG Chun-ling1,ZHANG Ai-mei2,ZHENG Hong-hai1 (1.College of Mechanical Engineering,Beijing Technology and Business University,Beijing 100048,China;2.Institute of High Energy Physics,Chinese Academy of Sciences,Beijing 100039,China);FEA ANALYSIS OF MAIN DETECTOR INSTALLED ON HARD X-RAY MODULATION TELESCOPE[J];Journal of Beijing Technology and Business University(Natural Science Edition);2009-05
10 ZHANG Yan-chang, WANG Zi-li, LUO Guang-en (School of Naval Architecture & Ocean Engineering. Jiangsu University of Science and Technology, Zhenjiang 212003, China);FE analysis of the complete lifting and mounting strength of ship superstructure[J];Ship Engineering;2006-03
China Proceedings of conference Full-text Database 4 Hits
1 Yu Linbo Huang Qibai Zhang Yongbo Cao Jian (School of Mechanical Science & Engineering, Huazhong University of Science & Technology, Wuhan 430000; ChangJiang Water Resources Commission, Wuhan 430000 );Research on raft structure and raft isolation characteristics of Double-decked floating raft isolation system[A];[C];2006
2 ZHANG Yan-chang, WANG Zi-li ( School of Naval Architecture & Ocean Eng., Jiangsu University of Science and Technology, Zhenjiang 212003, China);Complete superstructure's strength in liflting and mounting[A];[C];2005
3 Wang Yanbing,Dou Peilin,Du Xunbai (School of Naval Architecture & Ocean Engineering,Jiangsu University of Science and Technology,Zhenjiang Jiangsu 212003,China);Jack-up platform transport technics and analysis[A];[C];2009
4 YANG Zhao-yi,WANG Yuan-xing (China Aerodynamics Research and Development Center, Mianyang Sichuan 621000,China);Structure FEM analysis and optimization on diffusion section of some wind tunnel[A];[C];2013
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 HU Ji-bin,LI Xiao-jin,WEI Chao(National Key Laboratory of Vehicular Transmission,Beijing Institute of Technology,Beijing 100081,China);A Study on the Transformation Ratio Characteristics of the Hydraulic Transformer[J];Transactions of Beijing Institute of Technology;2010-02
2 TAN Jian-ping~1,SU Yong~1,ZHOU Jun-feng~1,HUANG Chang-zheng~2(1.School of Mechanical and Electrical Engineering,Central South University,Changsha Hu'nan 410083,China;2.Shaoguan University,Shaoguan Guangdong 512005,China);Realization of complicated network on 300 MN die forging hydrostatic press control system[J];Forging & Stamping Technology;2007-01
3 TAN Jian-ping1,HUANG Chang-zheng2,ZHOU Jun-feng1,XU Xian-dong1,Wei Liang3(1.School of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China;2.Department of Mechanical and Electrical Engineering,Shaoguan University,Shaoguan 512005,China;3.Southwest Aluminium Co.,Ltd.,Chongqing 401326,China);Improvement of control system of 300 MN die forging hydraulic press[J];Forging & Stamping Technology;2007-03
4 YAN Qing-song1,2,CHEN Hua-feng3(1.Department of Mechanical and Electrical Engineering,Guangdong Vocational College of Mechanical and Electrical Technology,Guangzhou 510515,China;2.College of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China;3.Changsha Punching and Shearing Ltd.,Changsha 410009,China);Design of QA35Y-30 hydraulic combined punching and shearing machine[J];Forging & Stamping Technology;2008-01
5 CHEN Jia-ming1,WANG Wei-xin2 (1.Department of Mechanical ang Electrical Engineering,Hangzhou Vocational Technical Callege,Hangzhou 310018,China;2.R&D Department.,CITIC Dicastal Wheel Manufacturing Co.,Ltd.,Qinhuangdao 066003,China);Study on design method of section size of open-side press frame[J];Forging & Stamping Technology;2008-02
6 LIU Hai-zhu,LEI Xiu,LI Yang,YIN Rui-feng (School of Mechanics,Inner Mongolia University of Technology,Huhhot 010051,China);Optimization design of manipulator clamp based on ADAMS[J];Forging & Stamping Technology;2008-03
7 LIU Xi-fen,HUANG Jia-guang(Department of Mechanical Engineering,Guangxi University of Technology,Liuzhou 545006,China);Injection mould CAD/CAE/CAM based on Pro/E and Moldflow and MasterCAM[J];Forging & Stamping Technology;2008-04
8 LI Zhi-bo1,DONG Guo-jiang*2,WU Shu-liang3,ZHAO Chang-cai3(1.Design Institute,Shenyang Heavy-duty Machinery Group Co.,Ltd.,Shenyang 110025,China;2.College of Vehicles and Energy Engineering,Yanshan University,Qinhuangdao 066004,China;3.College of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,China);Finite element analysis of 12.5 MN high speed forging hydraulic press frame[J];Forging & Stamping Technology;2008-04
9 GAO Jun-feng(Lanzhou Lanshi Heavy Machinery Technology Co.,Ltd.,Lanzhou 730050,China);Resent status and development of high-speed forging hydraulic press in our country[J];Forging & Stamping Technology;2008-06
10 YAO Jian,ZHOU Wei,GUO Wei-zhong(State Key Laboratory of Mechanical System and Vibration,Institute of Design and Control Engineering for Heavy Equipments,Shanghai Jiao Tong University,shanghai 200240,China);Modular analysis of kinematics performances for multi-link mechanical presses[J];Forging & Stamping Technology;2008-06
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 HAN Yu-kun,WANG Zhi-gang (School of Mechanical Engineering,Anyang Institute of Technology,Anyang 455000,China);Design of 6000 kN gantry-type scrap shearing machine[J];Forging & Stamping Technology;2012-03
2 ZHANG Yigong(Taiyuan Heavy Industry Co.,Ltd.,Technology Center,Taiyuan 030024,Shanxi China);Design and development of 80 MN double columns high speed forging hydraulic press in pre-stress structure[J];China Metal Forming Equipment & Manufacturing Technology;2011-03
3 CAO Yingqiang(MCC Capital Engineering & Research Incorporation Limited,Beijing 100176,China);Design and research of recycle unit for mandrel cooling water in forging process[J];China Metal Forming Equipment & Manufacturing Technology;2012-03
4 WANG Jing (Taiyuan Tongze Heavy Industry Co., Ltd., Taiyuan 030032, Shanxi China);Analysis of structure and welding technical process of frame for 12.5MN punch press[J];China Metal Forming Equipment & Manufacturing Technology;2012-03
5 LIU Tong-yi,HAN Ke-zhen (College of Mechanical Engineering,Shandong University of Technology,Zibo 255049,China);Reasons and measures for strong vibration of tube-side thickening press[J];Forging & Stamping Technology;2012-05
6 SHE Hai-bin1,ZHANG Xue-liang1,WEN Shu-hua1,LIAN Jin-hua2,CHEN Yong-hui1,LAN Guo-sheng1(1.College of Mechanical Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China; 2.Technology Center,Taiyuan Heavy Machinery Group Co.,Ltd.,Taiyuan 030024,China);Finite element modal analysis of 80 MN high speed forging hydraulic press[J];Forging & Stamping Technology;2013-02
7 Wang Zhibin,Hangzhou Steam Turbine Co.Ltd,Hangzhou 310022,China,Hangzhou Steam Turbine Co.Ltd,Hangzhou 310022,China,Dong Taining,Lu Hanjun,Hu Bo,Yang Ming,Shao Peng;Mechanical Analysis of Center Rest for Heavy Rotor Fabrication[J];Tool Engineering;2013-04
8 ;A Kind of PLC Control System by Wire Rope Shearing Machine[J];Industrial Control Computer;2013-09
9 HE Wenbin1,2 ZENG Pan1 ZHANG Lei1 LIN Feng1 YAN Yongnian1 ZHAO Jin3(1.Department of Mechanical Engineering,Tsinghua University,Beijing 100084; 2.Department of Electromechanical Science and Engineering, Zhengzhou University of Light Industry,Zhengzhou 450002; 3.Electro-mechanical Branch of China 22MCC Group Corporation Ltd.,Tangshan 063030);Pre-stress Test for Steel Wire Wound Moving Beam of Heavy Forging Press Based on Finite Element Method[J];Journal of Mechanical Engineering;2012-10
10 WANG Yong-qin1,LIU Jun-yi1,YAN Xing-chun1,HAN Bing-tao2,ZHANG Ying-jie2,ZHANG Jun2(1.The State Key Lab.of Mechanical Transmission,Chongqing University,Chongqing 400030,China;2.China National Heavy Machinery Research Institute Co,Ltd,Shanxi Xi'an 721000,China);Modal Analysis of the Whole Machine of 12.5 MN Twin Columns Pull-Down High Speed Forging Hydraulic Machine[J];Machinery Design & Manufacture;2013-02
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 MA Xun 1,ZHAO You ping 2 ( 1 Hubei Automobile College, Shiyan 442002; 2 Dongfeng Automobile Engineering Academy, Shiyan 442001);Finite Element Analysis on the Stiffness of the Body Structure of a Light-duty Bus[J];Mechanical Science and Technology;2002-01
2 Wan Tianbao Yang Jin;Loading Tests Computation of Xiling Changjiang Bridge[J];BRIDGE CONSTRUCTION;1998-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved