Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2008-06
Add to Favorite Get Latest Update

Stamping process design of oil filler

WANG Yue-zhen1,2,ZHAO Zhen-duo1,LIU Jian-xin2,LI Bin2,LI Feng2(1.School of Materials Science and Engineering,Shandong University,Jinan 250061,China;2.Complete Set Plant,Weichai Power Co.,Ltd.,Weifang 261001,China)  
The determination and verification of the process planning about tube-shaped parts were introduced by comparing drawing and necking process of the parts.The forming character of necking process was explained.Adopting the principle of the volume of material constant in the deformation process,the billet height of the necking tube was calculated using integral calculus.The key technology problems existing in the design and manufacture of the die were also studied.Qualified parts were produced with simple necking die.The die can ensure the stability of process;increase the utilization ratio of material and production efficiency.Sometimes it is more economic for slender tubular parts to neck instead of drawing.
【CateGory Index】: TG386
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 JI Yu-Jiang,YAO Yan,ZHU Yue-feng (Macheaical and Electrical Engineer College,Kaifeng University,Kaifeng 475004 ,China);Punching process design on defrosting conection of heater unit[J];Forging & Stamping Technology;2009-06
【Citations】
Chinese Journal Full-text Database 1 Hits
1 ZHAI De-mei,DUAN Wei-feng(Henan Mechanical and Electrical Engineer College,Xinxiang 453002,China);Process calculation of the upsetting forming and the design for the end shield's shoulder die[J];Forging & Stamping Technology;2007-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Cui Cunyi(Material Engineering Department,Baotou Vocational & Technical College;Baotou Inner Mongolia, 014030);A Few Noticeable Problems in Blanking Die Designing of Thick Sheet Metal Punching[J];Journal of Baotou Vocational & Technical College;2006-01
2 Yu Wensheng1 Nie Lanqi2(1.Vehicle Engineering Department,Baotou Vocational & Technical College,Baotou Inner Mongolia 014030;2.Shandong Hongqi Electromechanical Ltd.Co.,Weifang Shandong 261031);Protecting and Lubricating Treatment of Stainless Steel under the Deep Drawing[J];Journal of Baotou Vocational & Technical College;2008-04
3 Xie Qingsong ; Hu Xingcai (The 712 Research Institute, CSIC, Wuhan 430064, China);Simple Drawing Mould Design of the Upper Cover[J];Marine Electric & Electric Technology;2003-05
4 SU Guang-yi(Engineering Department of Car Service,Changchun University,Changchun 130022,China);Pro-and-con packed craft for blind hole nail butt and mold design[J];Journal of Changchun University;2006-08
5 HUANG Yan-ping(Shanghai Electronic Information Institute,Shanghai 200000,China);New designing method about the warm extrusion mold[J];Journal of Changchun Institute of Technology(Natural Sciences Edition);2008-01
6 Zhang Zhimin Zhang Baohong Feng Zaixing (North China Institute of Technology, Taiyuan 030051) Dong Yanlan (Chinese Academy of Ordnance Sciences, Beijing 100081);Computer Simulation and Optimization of Axle Housing Upset extruding Process[J];MATERIAL SCIENCE AND TECHNOLOGY;1998-03
7 Traffic College,Northeast Forestry University Ba Xingqiang Yu Jianguo;Design and Case Analysis of large Plate Elongation Cover on Urban Buses[J];Urban Public Transport;2008-05
8 FU Shuang-xue (Changsha Aeronautical Vocational and Technical College, Changsha Hunan 410124);The Exploration into Life in Mould Design and New Technology Application[J];Journal of Changsha Aeronautical Vocational and Technical College;2005-01
9 FU Hai-jun(Qinhuangdao Institute of Technology,Qinhuangdao 066100,China);New Technology for Tower Forging and Restricking of 6206 Bearing Rings[J];Bearing;2010-04
10 FU Hai-jun(Qinhuangdao Institute of Technology,Qinhuangdao 066100,China);A New Hot Extrusion Process to Produce Forging Blanks of 6203 Bearing Outer Ring with Material Core[J];Bearing;2010-08
China Proceedings of conference Full-text Database 7 Hits
1 CHEN Yan1,GAO Lin 1 ,WU Xian-Zhi2,QIU Ting-Yu 2 ,REN Jing2 (1.Department of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics, Nanjing,210016,China; 2.Technology Integration Management Lab,Pegatron Corporation,Suzhou,215000,China);Research on Multistage Deep Drawing and Ironing of an Irregular Cup[A];[C];2009
2 ;模具制造精度控制[A];[C];2008
3 Zhang Shutang Niu Shuhao Chen Yankun Li Xiaopeng Lei yong Henan Benma Co.,Ltd.Changge 461500;Bend the Process of Wrinkling and Fracturing Analysis and Control Methods[A];[C];2008
4 PENG Cheng-yun,HU Jing-pei( School of Material Science and Engineering, Chongqing Institute of Technology, Chongqing 400050, China; School of Technology, Chongqing Radio and TV University, Chongqing 400050, China);Design of cropper handgrip seats in stamping figuration[A];[C];2005
5 ;中心管冲压工艺及模具设计[A];[C];2007
6 Xu Shengli Gong Xiaotao Wang Bo Li Yan Shi Xin (Xi,an Aeronautical Polytechnic Insititute,Xi,an Shaanxi 710089,China);Forming Limit of Ellipsoid-bottomed Conical Bodies[A];[C];2007
7 ;An investigation of stamping-forging process for car flywheel panel[A];[C];2008
【Co-references】
Chinese Journal Full-text Database 1 Hits
1 WANG Xu-fang(Mechatronics Engineering Department,Hangzhou Vocational and Technical College,Hangzhou 310008,China);Technological analysis and drawing die design of complicated tube-shaped shell[J];Forging & Stamping Technology;2008-01
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 LIU Ming-hui(Guangdong School of Advanced E-commerce Technology, Guangzhou 51000, China);The die design of small cover by deep drawing process and press[J];Machine Development;2005-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved