Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2009-06
Add to Favorite Get Latest Update

Electric screw press driven by permanent magnet synchronous motor

FENG Yi,HUANG Shu-huai,LI Jun-chao,XIONG Xiao-hong (State Key Laboratory of Plastic Forming and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China)  
The fast response and stable output of the torque are key techniques of electric screw press. Working principle of the electric screw press with gear transmission was introduced,basic principle of flux vector control was discussed,then the driven solutions of electric screw press by permanent magnet synchronous motor of flux vector control were proposed. The superior performance of torque control was shown through experiments. Motor starting current and temperature rising were effectively controlled,which made the electric screw press achieve long-term stable operation. This research has been applied successfully in practical work.
【Fund】: 湖北省科技厅工程中心建设项目(2004AA101E04)
【CateGory Index】: TG315.9
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 LU Wei-min;SUN You-song;LU Huai-liang;Changjiang-Züblin Construction & Engineering(Shanghai)Co.,Ltd.;Faculty of Materials and Energy,Guangdong University of Technology;Faculty of Materials Science and Engineering,Huazhong University of Science and Technology;;Refabrication plan for heavy friction screw press[J];Forging & Stamping Technology;2013-05
2 GE Guang-jun1,YANG Shi-bin1,ZHANG Xiao-jie1,LI Xue-wei2(1.Henan University of Urban Construction,Pingdingshan 467036,China;2.Pingdingshan Coal Mine Machinery Corporation Limited,Pingdingshan 467000,China);Electric Screw Press Driven PLC Control System[J];Coal Mine Machinery;2012-05
3 MAO Kun,WANG Zhiqiang,LIU Gang(Key Laboratory of Inertial Technology,School of Instrumentation Science & Opto-electronics Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Research on Servo Control System of Screw Press Driven by Permanent Magnet BLDC Motor[J];Micromotors;2012-02
4 GE Guangjun1,YANG Fan2,ZHANG Xiaojie1(1.School of Electrical Engineering Henan University of Urban Construction, Pingdingshan 467036,China;2.School of Electrical Engineering,Henan University of Technology,Zhengzhou 450001,China);Electric Screw Press Driven by Switched Reluctance Motor[J];Electric Machines & Control Application;2012-01
【Citations】
Chinese Journal Full-text Database 4 Hits
1 XIONG Xiao-hong,LI Jun-chao,FENG Yi,HUANG Shu-huai(State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology,Huazhong University ofScience and Technology,Wuhan 430074,China);CNC electrical screw presses[J];Forging & Stamping Technology;2007-05
2 LI Jun-chao,FENG Yi,HUANG Shu-huai (State Key Laboratory of Plastic Forming and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China);Research on PLC S7-200 control system of electrical screw press[J];Forging & Stamping Technology;2008-03
3 SUN Yousong WEI Liangmo HUANG Kaisheng LI Mingliang (Guangdong University of Technology Guangzhou 510090 China);NC Heavy Duty Mechanical Driving Technology and Its Applications in Forming Equipments[J];;2005-01
4 SUN Yousong,LI Mingliang,WEI Hang(Guangdong Industrial University,Guangzhou 510090,Guangdong China);A Survey of Development of Screw Presses[J];;2005-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 YANG Kai, SHI Hang-fei, CHEN Zhi-jin, PENG Xi-wen (Dept. of CNC Engineering, No. 58 Research Institute of China Ordnance Industries, Mianyang 621000, China);A Detection Platform of Servo Drive System[J];Ordnance Industry Automation;2010-01
2 Peng Xiwen,Zhu Tongxing,Yang Kai(Dept.of CNC Engineering,No.58 Research Institute of China Ordnance Industries,Mianyang 621000,China);Design of Twin Motor AC Servo Drive Based on DSP[J];Ordnance Industry Automation;2010-07
3 Li Mao,Lei Ling(Dept.of Armament Products,No.58 Research Institute of China Ordnance Industries,Mianyang 621000,China);Compensation Method of Cannon Tilted Disturbance Torque[J];Ordnance Industry Automation;2011-03
4 Zhang Sen,Shi Hangfei,Chen Zhijin,ZhouXu,YangKai(Dept.of CNC Engineering,No.58 Research Institute of China Ordnance Industries,Mianyang 621000,China);DSP-Based Permanent Magnet Synchronous Motor Vector Control[J];Ordnance Industry Automation;2011-10
5 CAO Yong1,2),LI Hua-de1)1)School of Information Engineering,University of Science and Technology Beijing,Beijing 100083,China 2)College of Electrical Engineering,Liaoning University of Technology,Jinzhou 121001,China;Filtered-version iterative learning linear servo system with forgetting factor[J];Journal of University of Science and Technology Beijing;2009-02
6 WU Zhang-hui,LI Chun-mao,DENG Jia-ze (School of Electrical Engineering,Southwest Jiaotong University,Chengdu,Sichuan 610031,China);Judgment on Rotor Position of Brushless Rotor Based on Flux Relation Function[J];Converter Technology & Electric Traction;2008-02
7 LIU Cheng,LIU Jun,ZHANG Kai-kai(Shaanxi University of Science & Technology,Xi′an 710021,China);Research on Application of AC Servo Press in Pressure Tester for Package[J];Packaging and Food Machinery;2009-06
8 Du Juan; Xu Qiang; Jia Zhengchun (Huazhong University of Science and Technology, Wuhan 430064. China);Feedback Linearised Controller for PMSM[J];Marine Electric & Electric Technology;2003-01
9 Zhang Yu Wuhan Institute of Technology;Research In Motion Control Algorithm Based On Digital Servo Control Unit[J];;2004-04
10 HAO Chao?ying, WU Ying?wen (Changjiang Research Division of Controlling Equipment of Yangtze River Scientific Research Institute, Wuhan 430010,China);Preliminary research on key technologies and problems of using domestic turbine governors for Three Gorges Project[J];Journal of Yangtze River Scientific Research Institute;2003-03
China Proceedings of conference Full-text Database 6 Hits
1 LI Li-Na,DOU Li-Hua,CAI Tao,PAN Feng Beijing Institute of Technology,Beijing 100081,P.R.China;Sliding Mode Variable Structure Controller Design Based on Disturbance Observer[A];[C];2010
2 ZHU Guang-bin MENG Xiao-li YAN Yang-guang (Aero-Power Sci-Tech Center,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);Design of Speed Control Loop for PMSM AC Servo System Based On DSP[A];[C];2007
3 TENG Fu~-lin HU Yu~-wen HUANG Wen~-xin (Aero~-Power Sci~-Tech Center,Nanjing University of Aeronautics & A stronuautics,Nanjing,210016,China);The Application Research of AC Position Servo System Based on IRMCK201[A];[C];2007
4 ;NEW TREND OF TECHNOLOGICAL DEVELOPMENT ON THE LARGE AND HEAVY FORGING AND FORMING EQUIPMENTS[A];[C];2008
5 WANG Liang~(1,2),XU Jian-yuan~(1,2),LIN Xin~(1,2) (1.School of Electrical Engineering,Shenyang University of Technology, Shenyang,110870,China; 2.The Liaoning Province Key Laboratory of Safety operation and monitoring of the electrical network,Shenyang,110870,China);High Voltage Breaker Motor Drive Mechanism to Control Technology[A];[C];2012
6 LIU Aimin;ZHANG Jinhua;YANG Yanhui;Electrical Engineering School,Shenyang University of Technology;Liaoning Province Key Lab of Power Grid Safe Operation and Monitoring;;Research on the Brushless DC Motor Mechanism of High Voltage Circuit Breaker Based on Fuzzy Self-adaptive PID Control[A];[C];2014
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Zhang Xiaofeng Hu Qingbo Lü Zhengyu (Zhejiang University Hangzhou 310027 China);Torque Ripple Reduction in Brushless DC Motor Drives Using a Buck Converter[J];Transactions of China Electrotechnical Society;2005-09
2 Tan Guojun Luo Jinsheng Tao Yongzheng Wang Sijian;Variable Frequency Speed Adjustable System of Mine-hoist Design Based on S7-300 PLC[J];Electric Drive;2007-03
3 Tan Guojun Wang Sijian Kuai Songyan;Fully Digital Control System for High Power SRM Based on DSP[J];Electric Drive;2007-08
4 ZHAO Ting-ting1,JIA Ming-quan2(1.School of Mechanical Engineering,Shandong University of Technology,Zibo 255012,China2.Shandong Kehui Electric Corporation,Ltd.,Zibo 255087,China);Numerical control screw press driven by variable speed switched reluctance motor[J];Forging & Stamping Technology;2007-03
5 XIONG Xiao-hong,LI Jun-chao,FENG Yi,HUANG Shu-huai(State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology,Huazhong University ofScience and Technology,Wuhan 430074,China);CNC electrical screw presses[J];Forging & Stamping Technology;2007-05
6 LI Jun-chao,FENG Yi,HUANG Shu-huai (State Key Laboratory of Plastic Forming and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China);Research on PLC S7-200 control system of electrical screw press[J];Forging & Stamping Technology;2008-03
7 SUN Yousong,LI Mingliang,WEI Hang(Guangdong Industrial University,Guangzhou 510090,Guangdong China);A Survey of Development of Screw Presses[J];;2005-02
8 ZHANG Yuanliang, ZHUANG Yunxia, XING Jibai (Qingdao Qingduan Metalforming Machinery Co.,Ltd.,Qingdao 266300,Shandong China);Research and Development of the Electric Screw Press[J];China Metal Forming Equipment & Manufacturing Technology;2008-01
9 ZHU Yuansheng,ZHANG Fengjun,JIANG Tongxiu (Qingdao Qingduan Metal Forming Machinery Co.,Ltd. Qingdao 266300,Shandong China);The Latest Development of Electric Screw Press in China[J];China Metal Forming Equipment & Manufacturing Technology;2009-06
10 ZHUANG Yunxia,LUAN Xinmin,ZHU Yuansheng(Qingdao Qingduan Metalforming Machinery Co.,Ltd.,Jiaozhou 266300,Shandong China);Research and exploration of 100 MN friction screw press[J];China Metal Forming Equipment & Manufacturing Technology;2011-03
【Secondary References】
Chinese Journal Full-text Database 4 Hits
1 LI Xiu-ling;WEI Bao-li;Zhengzhou Railway Vocational & Technical College;;Manipulator Module Design of the Drive Motor[J];Equipment Manufacturing Technology;2013-09
2 Li Qin;Zhang Lichao;Yu Jun;Yi Wenxing;Feng Yi;State Key Laboratory of Material Process and Die and Mould Technology,Huazhong University of Science and Technology;;Data monitoring system of electrical screw press based on UDP protocol[J];Forging & Stamping Technology;2014-04
3 ZHANG Yuan-liang,ZHANG Hua-de,LIU Xue-zhen,ZHANG Xiang-yuan(Qingdao Qingduan Metal Forming Machinery Co.,Ltd.,Qingdao 266300,China);Research on 160 MN electric screw press[J];Heavy Machinery;2013-03
4 Zhao Tingting;Wang Hao;School of Mechanical Engineering,Shandong University of Technology;JIER Machine Tool Group Co. Ltd.;;Study of working control model and simulation system of servo screw press[J];Modern Manufacturing Engineering;2014-02
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Song Juming (Xuzhou Nonnal University);FM354-Based AC Servo System-Controlled and Implementation[J];Electrotechnical Journal;2003-04
2 Tsinghua University Jiao Wei Ma Qingxian Huang Benyang;Development of control software system for compound friction screw press[J];FORGING & STAMPING TECHNOLOGY;2000-04
3 Shandong University Xia sifei Hao binhai Shandong Institute of Measurement Science Xia xiaohong;Discussion on heating problem of motor rotor for electric screw presses[J];Forging & Stamping Technology;2003-01
4 SUN You-song ZHANG Hong-chao (Guangdong University of Technology);Some new trends in metal sheet processing equipments[J];Forging & Stamping Technology;2004-04
5 Huazhong University of Science & Technology Xiong xiaohong Huang shuhuai;CNC system for powder compaction presses[J];FORGING & STAMPING TECHNOLOGY;1999-02
6 Guan Yanjin, Li Peiwu;Model JA58-160A double-strike electric screw press[J];METALFORMING MACHINERY;2000-04
7 WEI Liangmo,ZHU Xinrong,SUN Yousong,WEI Hang(Guangdong Technology University,Guangzhou 510090,Guangdong China);Kinematical Analysis of Crank Press Driven by Varying Speeds[J];;2004-03
8 XU Gang, LU Jie, HUANG Caiyuan( Editorial Department of this Magazine, Jinan 250022, Shandong China );Actuality & Progress in Metal Sheet Stamping Forming Technique & Equipment[J];;2004-04
9 SUN Yousong WEI Liangmo HUANG Kaisheng LI Mingliang (Guangdong University of Technology Guangzhou 510090 China);NC Heavy Duty Mechanical Driving Technology and Its Applications in Forming Equipments[J];;2005-01
10 SHANG Siyue(The Jinan Municipal Peoples Government,Jinan 250001,Shandong China);Study and Reference about the Taiwan Forging Machine Tool Industry[J];;2005-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved