Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2010-01
Add to Favorite Get Latest Update

Numerical simulation and experimental investigation on one-path deep drawing spinning of conical part

XIA Qin-xiang1,ZHANG Shuai-bin1,WU Xiao-yu1,CHENG Xiu-quan2(1.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China;2.Department of Airplane Maintenance Engineering,Guangzhou Civil Aviation College,Guangzhou 510403,China)  
The process of one-path deep drawing spinning for the conical part was simulated by the finite element software,MSC.MARC,and the stress-strain distribution was studied.The influences of feed rate of the roller and the ratio of thickness to diameter of the blank on the forming quality were mainly investigated.The causes of the forming defects,such as wrinkling,thinning and springback,and the defect position were analyzed.Both the simulation and experiment results show that wrinkling and thinning occur easily in the mouth region(the blank flange during the forming process) and the lower region of wall near the fillet of the conical part,which is similar to the general deep drawing of conical part and should be paid close attention to.
【Fund】: 国家自然科学基金资助项目(50775076)
【CateGory Index】: TG306
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 5 Hits
1 XU Yin-li,ZHAN Mei,YANG He,ZHANG Jin-hui,MA Fei(College of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072,China);Springback law analysis of cone spinning using 3D FEM[J];Materials Science and Technology;2008-02
2 Xia Qin-xiang Hu Yu Sun Ling-yan Ye Bang-yan (School of Mechanical Engineering,South China Univ.of Tech.,Guangzhou 510640, Guangdong,China);Numerical Simulation of Influence of Roller Working Surface on Spin-Forming of Rectangular Inner Meshing Gear[J];Journal of South China University of Technology(Natural Science Edition);2007-08
3 XIA Qin xiang, RUAN Feng (Institute of Mechanical Engineering, South China University of Technology,Guangzhou 510640,China);Effect of the Roller Shape on the One-Path Deep Drawing Spinning of Cups[J];Metal Forming Technology;2002-06
4 LI Yu-qiang 1 CUI Zhen-shan 3 RUAN Xue-yu 5 (Shanghai Jiao Tong University,Shanghai 200030) YANG He 2 LIU Jian-hua 4 (Northwestern Polytechnical University,Xi'an);Effects of parameters on the distributions of stress and strain of multiprocess draw-spinning[J];Journal of Plasticity Engineering;2004-05
5 ZHAN Mei LI Hu YANG He CHEN Gang(College of Materials Science & Engineering,Northwestern Polytechnical University,Xi'an,710072 China);Wall thickness variation during multi-pass spinning of large complicated shell[J];Journal of Plasticity Engineering;2008-02
Chinese Journal Full-text Database 10 Hits
1 YU Cheng-hui(School of Mechanical and Automotive Engineering,Hefei University of Technology,Hefei 230601,China );The processing research on technology of rotary awl cover spinning[J];Journal of Anhui Technical College of Water Resources and Hydroelectric Power;2005-03
2 ZHANG Ai - rong (Craftsmen School, Anyang 455000, China);Application of Spinning Forming to Production of Constant Magnetic Motors[J];Journal of Anyang University;2004-04
3 Han Yingchun (Jilin University of Technology) Guo Quanjiang Wang Xi (Changchun 55 Research Institute);OPTIMUM DESIGN FOR THE ROLLER REST SYSTEM OF THE SPINNING MACHINE MODEL XYS6-340[J];Acta Armamentarii;1992-01
4 YAN Qun, SUN Changguo, LIN Wenxing, YU Datai, MA Zhenping, LI Yu (Robot Research Institute, UST Beijing, Beijing 100083,China) (12th Research Institute, MEl, Beijing 100016,China);Designing Involute Roller Path in Numeral Control(NC) Spinning Machine Graphic Programming System[J];Journal of University of Science and Technology Beijing;2002-03
5 Sun changguo ; Yu Datai; Hu Jianzhong; Ma Zhenping; Li Yu( 1) Robot Research Institute, UST Beijing, Beijing 100083, China 2) 12th Research Institute, MEI, Beijing 100016, China);^Self-learning Motion Control of Spinning Machine[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1998-05
6 Wang Tiefu; Shi Lianjie(a. Laboratary for Shock Wave and Detonation Physics Research, Southwest Institute of Fluid Physics,Chengdu,610003)(b. Nanjing University of Science and Technology, Nanjing, 210094);STUDIES ON THE RELATION BETWEEN SPIN COMPENSATION AND SHEAR-FORMING PARAMETERS IN SHEAR-FORMED SHAPED CHARGE LINERS[J];EXPLOSION AND SHOCK WAVES;1996-04
7 XUE Ke-min, JIANG Shu-yong, KANG Da-chang (School of Materials Science and Engineering , Harbin Institute of Technology Harbin, 15001 China);Power spinning deformation of thin-walled cylinders with longitudinal inner ribs[J];Material Science and Technology;2002-03
8 XU Wen-chen, SHAN De-bin, LU Yan,LI Chun-feng (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China,);Research on the multi-pass shear spinning technology of small-angle conical workpieces[J];Material Science and Technology;2004-01
9 LI Mao-sheng~1, KANG Da-chang~2, ZHANG Shi-hong~3, YAN Yong-nian~1 (1. Department of Mechanical Engineering, Tsinghua University, Beijing 100084,China;2. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China;3. Research Institute of Metal, CAS, Shenyang 110016,China);Research on contacting pressure in ball-spinning[J];Material Science and Technology;2004-02
10 XU Wen-chen,ZHANG Heng-da,SHAN De-bin,GUO Bin,KANG Da-chang(School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China);Hot spinning technology of wheel rim of TC4 titanium alloy[J];Materials Science and Technology;2008-01
China Proceedings of conference Full-text Database 6 Hits
1 WANG Qun, HE Yi-qiang, SUN You-ping, CHEN Zhen-hua, XU Zheng-kun (College of Material Science and Engineering, Hu'nan University, Changsha Hu'nan 410082, China; Changsha University, Changsha Hu'nan 410082, China);Current state and trend of tube spinning[A];[C];2005
2 ZHANG Yan-qiu, XU Wen-chen, SHAN De-bin, LU Yan(School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, Heilongjiang, China);Numerical simulation and failure analysis of cold spinning of large-size and thin-walled vessel head[A];[C];2005
3 Chen Jian-an~1 Xia Qin-xiang~1 Cheng Xiu-quan~2 Wang Jia-zi~1 1.College of Mechanical Engineering South China University of Technology,Guangzhou Guangdong,510640 2.Guangzhou Civil Aviation College,Guangzhou Guangdong,510403,China;Development of Multi-station Automatic Spinning Roller-depot Used for Horizontal CNC Spinning Machine[A];[C];2007
4 Han Dong Yang Yantao Zhang Liwu Wang Beiping (Xi'an Aerospace Power Machinery Factory,xi'an,710025);Analysis of the burr in the external surface of spinning tube[A];[C];2007
5 Yang Yantao Han Dong Zhang Liwu Xi'an Aerospace Power Machinery Factory,xi'an,710025;Research on spinning process of aluminium alloy case with curved surface[A];[C];2007
6 Mao Baiping Shen Jian (Research Central for Non-Ferrous Metals Processing,General Research Institute for Non-Ferrous Metals,Beijing 100088,China);The Studies on Microstructures and Mechanical Properties of 6061 Al Alloy Tube with Inner Flange and Outer Flange by Spinning Forming[A];[C];2007
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 ZHAN Mei, YANG He, LI Zhen-bin(Department of Materials Forming and Control, College of Materials Science & Engineering, Northwestern Polytechnical University, Xi'an 710072, China,);FEM numerical analysis of springback law of NC tube bending[J];Material Science and Technology;2004-04
2 JIN Chao-hai, ZHOU Xian-bin, DIAO Ke-shan, LI Xiao-xing(Beijing University of Aeronautics and Astronautics, Sheet Metal Forming Research Center, Beijing 100083, China);Springback analysis for stretch bending of aluminum profile[J];Material Science and Technology;2004-04
3 CHEN Lei1,YANG Ji-chang1,ZHANG Li-wen2(1.School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013,China;2.Dept.of Materials Engineering,Dalian University of Technology,Dalian 116023,China);Research on the factors influencing bending springback of sheet metal by FEM[J];Materials Science and Technology;2007-02
4 South China University of Technology Xia Qinxiang Ruan Feng Kyoto University Susumu Shima Hidetoshi Kotera Daifu Yasuhuku;Study on one-pass deep drawing spinning of cups[J];Forging & Stamping Technology;2002-06
5 Xia Qin-xiang1 Liang Bai-xiang1 Cheng Xiu-quan2 Ruan Feng1(1.College of Mechanical Engineering,South China Univ.of Tech.,Guangzhou 510640,Guangdong,China;2.Guangzhou Civil Aviation College,Guangzhou 510403, Guangdong,China);Numerical Simulation of One-Path Neck-Spinning of Oblique Tubes[J];Journal of South China University of Technology(Natural Science Edition);2006-05
6 DU Kun, YANG He (Northwest Polytechnic University, Xi'an 710072) P558;Advances in the Multiprocess Conventional Spinning Technique[J];Mechanical Science and Technology;2001-04
7 LIU Jian-hua, YANG He (School of Materials Science and Engineering, Northwest Polytechnic University, Xi′an 710072);Development of Multi-process Conventional Spinning and Research on Roller-Trace[J];Mechanical Science and Technology;2003-05
8 Ma Fei,Yang He,Zhan Mei (College of Materials Science and Engineering,Northwestern Polytechnical University,Xi′an 710072);Influence of Process Parameters on Conventional Spinning Formation Process[J];Mechanical Science and Technology;2007-03
9 Lin Zhongqin Liu Gang Li Shuhui Ni Jun (Shanghai Jiaotong University);APPLICATION ORTHOGONAL EXPERIMENT DESIGN IN INCREASING DIMENSIONAL ACCURACY OF U-SHAPED PARTS[J];Chinese Journal of Mechanical Engineering;2002-03
10 LIU Xing jia (Harbin University of science and engineering 150080);THE RESEARCH ON THE DESIGN OPTIMATING TWO GOALS OF THE ROLLERS OF END SPINNING MACHINES[J];Journal of Plasticity Engineering;2001-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved