Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2010-06
Add to Favorite Get Latest Update

Microstructure and properties of cold rolled Cu_(88)Fe_(12) alloys

ZHOU Zhi-ming1,CAO Min-min1,TANG Li-wen1,LIU Chun1,WANG Ya-ping2(1.Schcool of Material Science and Engineering,Chongqing University of Technology,Chongqing 400054,China;2.Schcool of Science,Xi'an Jiaotong University,Xi'an 710049,China)  
The microstructures and properties of heavily cold rolled Cu88Fe12 alloys at low strain rate were studied at room temperature.The experiment results show that the microstructure of Fe-rich phases are deformed to ribbons filaments,the microhardness increases continuously with the increasing of rolling strain,the electrical conductivity first decreases gradually with the deformation strain,however,after deforming to certain degree,the electrical conductivity increases again.
【Fund】: 重庆市自然科学基金;; 重庆市教育委员会科学技术研究项目;; 新世纪优秀人才支持计划(NCET-07-0679);; 重庆理工大学基金(09-60-16)
【CateGory Index】: TG335.12
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 3 Hits
1 GUO Wei1,2,WANG Qu-dong1,2(1.National Engineering Research Center of Light Alloy Net Forming,Shanghai Jiao Tong University,Shanghai 200240,China;2.State Key Laboratory of Metal Matrix Composites,Shanghai Jiao Tong University,Shanghai 200240,China);Research progress of fabricating ultrafine-grained composites by severe plastic deformation[J];Forging & Stamping Technology;2010-01
2 XU Honghui DU Yong CHEN Hailin PAN Zhu XIONG Wei(State Key Lab for Powder Metallurgy, Central South University, Changsha 410083);Present Status and Development of Cu-based Alloy with High Strength and High Conductivity[J];Materials Review;2004-10
3 Wang Debao1,Wu Yucheng1,Wang Wenfang1,Zong Yue2 (1.School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China;2.Composites Company,Hefei University of Technology,Hefei 230009,China);Extension Solid Solubility of Immiscible Cu-Cr Alloy System Induced by Mechanical Alloying[J];Chinese Journal of Rare Metals;2008-01
【Co-citations】
Chinese Journal Full-text Database 4 Hits
1 CHEN Wen-jie,ZHOU Qing,DENG Zhu-jun,ZHANG Fang-zhe(College of Mechanical & Electrical Engineering,Nanjing University of Aeronautics andAeronautics,Nanjing 210016,China);Numerical simulation of crack initiation trends during ECAP based on Normalized Cockcroft & Latham ductile fracture criterion[J];Forging & Stamping Technology;2010-05
2 Hu Jiangping1,Liu Gaojie1*,Yan Wei1,An Geng2(1.School of Material Science and Engineering,Xi′an Jiaotong University,Xi′an 710049,China;2.Center of Technology,Jinduicheng Molybdenum Group Co.,Ltd,Xi′an 710068,China);Micro/Nanometer MoC Powders Prepared by High-Energy Mechanochemistry Method and Coating Abrasion Test[J];Chinese Journal of Rare Metals;2009-02
3 Guo Zhongzheng1,Sun Yong1,Duan Lingkun1,Guo Shimei2,Li Yuge1 (1. Key Laborary of Advanced Materials Yunnan Province,Kunming University of Science and Technology,Kunming 650093,China; 2. Qujing Normal University,Qujing 655000,China);Structure and Mechanical Properties of Cu-W Alloy Thin Films Deposited by Sputtering[J];Chinese Journal of Rare Metals;2010-01
4 LIU Dong-hua,LIU Yong,ZHAO Da-peng,LIU Zu-ming,HAN Yun-juan(State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Effect of addition manner of oxygen on mechanical properties of iron-based alloy 14YWT[J];The Chinese Journal of Nonferrous Metals;2010-05
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 JIA Shu-zhuo, GUO Xue-feng, XU Chun-jie, ZHANG Zhong-ming,L Tao (School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, China);Microstructure and ageing behavior of Mg_2Si/Mg-Al composites produced by reciprocating extrusion[J];Ordnance Material Science and Engineering;2007-05
2 CUI Xiao long, QI Min, WANG Lai ( Dept. of Mater. Eng., Dalian Univ. of Technol., Dalian 116024, China );Control of oxidation and formation of non-equilibrium phase in Cu-Cr alloys during MA[J];Journal of Dalian University of Technology;2001-02
3 HU Qiang,JIE Xiao-ping,YAN Hong,ZHANG Fa-yun,CHEN Guo-xiang (Institute of Advanced Forming and Manufacturing and Die and Mold,Nanchang University,Nanchang 330031,China);Mechanical properties and damping capacity of AZ61 magnesium alloy matrix composites with SiC particulates[J];Forging & Stamping Technology;2008-02
4 HAN Ya-li1,LIU Jin-song1,2,ZHANG Fu-quan2(1.Department of Mechanical and Electronic Engineering,Air Force Aeronautical and Service Technical College,Changsha 410124,China;2.School of Materials Science and Engineering,Hunan University,Changsha 410082,China);Study on sheet rolling process of SiC_p particulate reinforced aluminum matrix composite[J];Forging & Stamping Technology;2008-05
5 GUO Sheng-li1,LI De-fu1, CHEN Dong2,WANG Hao-wei2(1. Processing Engineering Research Center,General Research Institute for Nonferrous Metals, Beijing 100088,China;2. State Key Laboratory of Metal Matrix Composite, Shanghai Jiaotong University, Shanghai 200030, China);Research on material constant values of TiB_2/Al during elevated temperature tensile test[J];Forging & Stamping Technology;2009-03
6 Zhang Tongjun; Yang Junyou; Zhou Zhuohua;Zhang Jie and Cui Kun(Huazhong University of Science and Technology,Wuhan 430074 );MECHANICAL ALLOYING PROCESS DURING HIGH ENERGY BALL MILLING[J];POWDER METALLURGY TECHNOLOGY;1996-01
7 Z.M.Zhang~* C.J.Xu X.F.Guo S.Z.Jia School of Materials Science & Engineering,Xi'an University of Technology,Xi'an 710048,China;RECIPROCATING EXTRUSION OF IN SITU Mg_2Si REINFORCED Mg-Al BASED COMPOSITE[J];金属学报(英文版);2008-03
8 Wang Yaping Cui Jiangou Yang Zhimao Ding Bingjun Zhou Jingen (Xian Jiaotong University, 710049, Xian);The Investigation of the Micro Grain CuCr Alloys and Its Electrical Breakdown Properties[J];JOURNAL OF XI'AN JIAOTONG UNIVERSITY;1997-03
9 Cui Lan 1, Ji Xiaona 1*, Chen Xiaoping 1, Ding Li 2 (1. Analysis Center of Tianjin University, Tianjin 300072, China; 2. The 46th Research Institute of Scientific and Technological Group Company of Chinese Electron, Tianjin 300072, China);Research and Development of Pure Copper Wires and Copper-Based Materials with High Strength and High Conductivity[J];Chinese Journal of Rare Metals;2004-05
10 Zhang Bing, Yuan Shouqian, L Shuang, Zhang Xifeng, Wang Chao (College of Materials Science and Engineering, Xi'an University of Architecture & Technology, Xi'an 710055, China);Effect of Accumulative Roll Bonding(ARB) Process on Microstructure and Mechanical Properties of 1060 Commercial Pure Aluminium[J];Chinese Journal of Rare Metals;2008-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved