Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2012-02
Add to Favorite Get Latest Update

Analysis on vibration factors of main drive system of CSP hat rolling mill

WU Ji-min,WU Bing-sheng (College of Mechanical and Electrical Engineering,Hebei University of Engineering,Handan 056038,China)  
The main drive system of CSP rolling mill abnormal vibration phenomena was analyzed to determine the causes of the vibration.At first,it was found that the mechanical gaps of the main drive system had a great impact on twist vibration of system,and then the rolling interface changes due to rolling torque on the vibration impact was analyzed.The MATLAB/Simulink software was used to simulate the rolling torque.The results show that the fluctuation of the rolling torque has a immediate impact on the vibration of the main drive system.The fluctuation of the friction coefficient impacting the main drive system vibration is due to the stead-state self-excited torsional vibration produced to the main drive system.By analyzing the electrical parameters controlled by the inverter and the main drive system torsional vibration impact,it concludes that the harmonics torque is generated by the electromagnetic harmonics,so that the main drive system can produce the torsional response.At last,a series of measures on the theoretical basis to inhibit the abnormal vibration were provides.
【CateGory Index】: TG333
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 Wu Bingsheng;Li Yunqiang;Wu Jimin;College of Mechanical and Electrical Engineering,Hebei University of Engineering;Handan Iron and Steel Group Limited Liability Company;;Simulation and analysis on vertical vibration of CSP hot strip mill[J];Forging & Stamping Technology;2014-01
2 Wu Bingsheng;Wang Zilong;Wu Jimin;Zhang Zibo;College of Mechanical and Electrical Engineering,Hebei University of Engineering;Handan Iron & Steel Group;;Influence of rolling lubrication on vibration of cold rolling mill[J];Forging & Stamping Technology;2014-08
3 Wu Bingsheng;Zhang Shuai;College of Mechanical and Electrical Engineering,Hebei University of Engineering;;Torsional vibration analysis on the main drive system of tandem cold rolling mill[J];Forging & Stamping Technology;2015-05
4 WU Bing-sheng;ZHANG Zi-bo;College of Mechanical and Electrical Engineering,Hebei University of Engineering;;Applied research on blind source separation principle in mill vibration[J];Heavy Machinery;2014-06
【Citations】
Chinese Journal Full-text Database 4 Hits
1 Chen Yonghui Liu Shiyuan Liao Guanglan (Huazhong University of Science & Technology);STUDY ON TfflRD-OCTAVE-MODE CHATTER ON 4-H COLD ROLLING MILLS[J];Chinese Journal of Mechanical Engineering;2003-06
2 FAN Xiaobin~1 ZANG Yong~1 WU Diping~1 WANG Yongtao~1 LIAO Yifan~2 HUANG Zhijian~2 1.School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083; 2.Guangzhou Zhujiang Iron and Steel Co. Ltd.,Guangzhou 510730;VIBRATION PROBLEMS OF CSP HOT TANDEM MILL[J];Chinese Journal of Mechanical Engineering;2007-08
3 Fan Xiaobin~1 Zang Yong~1 Wang Yongtao~1 Liao Yifan~2 Huang Zhijian~2(1.School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083,China;2.Guangzhou Zhujiang Iron and Steel Co.Ltd,Guangzhou Guangdong 510730,China);The Rolling Interface Friction Characteristic of CSP and its Effect with Rolling Mill Vibration[J];Lubrication Engineering;2006-10
4 Yang Xu1,Tong Chaonan1,Meng Jianji2 (1School of Information Engineering,University of Science and Technology Beijing Beijing,100083,China) (2Central Research Institute of Building and Construction Co.,LTD,MCC Group Beijing,100088,China);Mathematical Model of Rolling Force in the Analysis of Cold Rolling Chatter[J];Journal of Vibration, Measurement & Diagnosis;2010-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Pei Lingming(University of Science & Technology Beijing);The Effect of Torsional Vibration on Vertical Vibration of Rolling Mill[J];Anhui Metallurgy;2010-03
2 MENG Ling-qi,PENG Guang-ming(College of Engineering,Anhui Science and Technology University,Fengyang 233100,China);Non-linear Control Process Analysis of Medium Mill[J];Journal of Anhui Science and Technology University;2011-04
3 AI Hou-Zhuang~1,ZHANG De-chen~2,TANG Han~3,LI Jiu-hui~2(1.The Cold Rolling Strip Mill,BenXi Iron & Steel(Group) Co Ltd,Benxi 117021,China;2.School of Mechanical Engineering,University of Science and Technology Liaoning,Anshan 114051,China;3.Angang Intyrpaise Company of Civif Adminix Trion,Anshan 114001,China);Investigation of dynamic characteristics for 1700 four rollers strip mill[J];Journal of Anshan University of Science and Technology;2006-05
4 LI Jiu-hui1,LAI Ying-wu2,ZHANG De-chen3(1.Ansteel Engineering Technology Co Ltd,Anshan 114021,China;2.China Petroleum Liaoyang Petroleum Chemical Fibre Company Machine Factory,Liaoyang 111003,China;3.School of Mechanical Engineering,University of Science and Technology Liaoning,Anshan 114051,China);Dynamic analysis on rolls of 1780 tandem rolling mill[J];Journal of University of Science and Technology Liaoning;2010-02
5 SHA Ming-hong1,LAI Ying-wu2,ZHANG De-chen3(1.School of Materials and Metallurgy,University of Science and Technology Liaoning,Anshan 114051,China;2.Machine Factory of Liaoyang Petroleum Chemical Fibre Company of China Petroleum,Liaoyang 111003,China;3.School of Mechanical Engineering and Automation,University of Science and Technology Liaoning,Anshan 114051,China);Dynamic analysis on mill-stand system of 1780 tandem rolling mill[J];Journal of University of Science and Technology Liaoning;2010-03
6 LI Shanqing (Equipment Div.,Baosteel Research Institute,Shanghai 201900,China);Research and Development of Cold Rolling Technology in Baosteel and Its Combination with Engineering Projects[J];Baosteel Technology;2009-S1
7 LI Qing - min ( CSMCC Mechanical and Electrical Installation Company, Baotou 014010, Nei Monggol, China);Application of AC to AC frequency conversion vector control system in hot continuous rolling project[J];Science & Technology of Baotou Steel(Group) Corporation;2005-02
8 Liao Zili Li Changbing Ji Xiangpu (Armored Force Engineering Institute,Beijing 100072);Study on Brushless DC Motor Digtal Control System Applied in Electric Transmission of Tank[J];;1999-03
9 SONG Xiao qing 1, ZHU Zhi kun 2,ZANG Ke mao 2, ZHENG Mo qiao 1 (1.School of Vehicle & Transportation Engineering,Beijing Institute of Technology,Beijing 100081, China;2.Department of Control Engineering,Armored institute of technology,Beijing;Analysis of the Turning Control of Track Vehicle Droven by BLDCM[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2001-04
10 LI Li-yu, LI Chang-bign, ZANG Ke-mao(Academy of Armored Force Engineering, Beijing 100072 , China);A Design of Signal Converting Circuit for Resolver in the Digital Gun Control System[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2004-03
China Proceedings of conference Full-text Database 7 Hits
1 Guan Liming,Lin Jian,Hu Gengsheng School of printing,Hangzhou Dianzi University,Hangzhou Zhejiang 310018,P.R.China;Synchronization of Non-axis Sheet Lose Machine Based on Sliding Control[A];[C];2008
2 LV Jie LU Bo LIU Lijiao(National Quality Supervision And Inspection Center Of Pneumatic Products,Ningbo 315500);Research on System Features And Oil Filling Program Of Direct Drive Volume Control (DDVC) electro-hydraulic servo system[A];[C];2010
3 ZENG Chun~1,XIONG Zhi-qiang~2 (1.School of Logistics Engineering,Wuhan University of Technology,Wuhan,430063;2.Mechanical and Electrical School,wuhan university of science and technology,wuhan,430081);Reaseach and numerical simulation on influence of horizon chatter velocity to vertical vibration in temper rolling mill[A];[C];2010
4 XIE Jun (Beijing Shougang Automation Information Technology Co.,Ltd.,Beijing Shijingshan 100041);Cycloconverter Power Section Design[A];[C];2008
5 Wang Kuaishe~2 Wang Xunhong~1 Wang Wen~2 Li Youyuan~1 Wang Yong~1 (1.Cold Rolling Plant,Baosteel Branch,Shanghai,200941; 2.Xi' an University of Architecture and Technology,Xi' an,710055);Analysis and Strategy of Vibration Marks on Thin Steel Strip Below 0.2 mm Thickness during Cold Rolling[A];[C];2009
6 Wang Huaimin Liu Zhengshi;Investigation of Dynamic Characteristics for Four Rollers Hot Strip Mill[A];[C];2008
7 Peng Yan~1 Zhang Ming~1 Sun Jianliang~1 Cong Yangyang~1 Xing Jiankang~1 Gao Wei~2 (1:National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University,Qinhuangdao 066004; 2:Shougang Qian'an Iron and Steel Co.,Ltd.,Qian'an 064400);Vibration Comprehensive Test and Analysis on Finisher 2 of 2160 Hot Strip Mill[A];[C];2013
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Ruicheng TONG Chaonan LI Boqun Information Engineering School,University of Science and Technology Beijing,Beijing 100083,China;H_∞ control based on LMI for electromechanical vibration of a rolling mill main drive system[J];Journal of University of Science and Technology Beijing;2006-02
2 Zhang Dengshan Li Huade (Beijing of University Science and Technology Beijing 100083 China);H_∞ Vibration Suppression Controller in the Hot Continues Rolling Mill Machine[J];Transactions of China Electrotechnical Society;2006-01
3 ZHAO Hong,LI Qing,LI Hua-de(University of Science and Technology Beijing,Information collage,Beijing 100085,China);Application of Load Observer to the Control of Torsional Vibration of Rolling Mill[J];Large Electric Machine and Hydraulic Turbine;2006-02
4 WAGN Guang-xiong, LI Lian-feng, WANG Xin-sheng (Department of Control Engineering, Harbin Institute of Technology, Harbin 150001, China);The description of the parameter uncertainty for robust design[J];Electric Machines and Control;2001-01
5 HE Zhen,RAO Dan,WANG Guang-xiong,LIU Zhi-yuan (School of Astronautics,Harbin Institute of Technology,Harbin 150001,China);Fragility and robustness of the control system[J];Electric Machines and Control;2011-04
6 Li Yinshan Pan Wenbo Wu Yanyan LI Xinye ( Department of Mechanics,Hebei University of Technology,Tianjin 300130,China);ASYMMETRIC,STRONGLY NONLINEAR OSCILLATION CHARACTERISTIC ANALYSIS[J];Journal of Dynamics and Control;2012-01
7 Zhao Hong Li Huade Li Qing;High-performance of Frequency Conversion Regulating Speed System Based on the Theory of Robustness Internal Model[J];Electric Drive;2006-12
8 HUANG Shi~1 LIAO Yong~1 XU Ru-qin~2 XIANG Da-wei~1 (1.State Key Laboratory of Power Transmission Equipment & System Security and New Technology,Chongqing University,Chongqing 400044,China;2.School of Information and Control Engineering,Liaoning Shihua University,Fushun 113001,Liaoning,China);Study on Torsional Oscillation Suppression of Rolling Mill Based on the Fuzzy Single Neuron Mixed Control[J];Electric Drive;2008-11
9 ZHAO Hong,LI Hua-de,LI Qing(School of Information Engineering,University of Science and Technology Beijing,Beijing 100083,China);Applying load observer to control the torsional vibration of rolling mill[J];Forging & Stamping Technology;2006-05
10 ZHANG Xian da,BAO Zheng (Key Laboratory for Radar Signal Processing,Xidian University,Xi'an,Shanxi 710071,China);Blind Source Separation[J];Acta Electronica Sinica;2001-S1
【Secondary References】
Chinese Journal Full-text Database 2 Hits
1 Wu Bingsheng;Zhang Shuai;College of Mechanical and Electrical Engineering,Hebei University of Engineering;;Torsional vibration analysis on the main drive system of tandem cold rolling mill[J];Forging & Stamping Technology;2015-05
2 ZHANG Rui-cheng;ZHUO Cong-lin;College of Electrical Engineering,Hebei United University;;Study on the Vibration Characteristics of the Electromechanical Coupling in the Main Drive System of Rolling Mill with Impacts of the Magnetic Parameters[J];Machinery Design & Manufacture;2015-08
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Sun Zhihui; Zou Jiaxiang; He Ruying; Yue Hailong( College of Mechanical Engineering, USTB, Beijing 100083, PRC ) (Baoshan Iron and Steel Company, Shanghai 200941);Vibration Analysis of 2030 Cold Continuous Mill[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1997-S1
2 LUO Yongjun, WANG Changsong, LIU Jiang, ZHANG Me, LI Jiangjie, SUN Ke Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Dynamic Simulation for the AGC of Hot Strip Mills[J];Journal of University of Science and Technology Beijing;2004-02
3 ZHANG Ruicheng,TONG ChaonanInformation Engineering School,University of Science and Technology Beijing,Beijing 100083,China;Electromechanical vibration control of the main drive of a rolling mill based on auto-disturbance-rejection control technology[J];Journal of University of Science and Technology Beijing;2006-10
4 Wang Changsong;Sun Minsheng;Yuan Xi (Mechanical Engineering College, USTB, Beijing 100083, PRC);Simulation and Analysis of Chatter Phenomenon on Cold Mill Rolling Wide Strip[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1994-S2
5 Guo Zhiqiang;THE FINITE ELEMENT METHOD ABOUT THE RIGIDITY PERFORMANCE OF WHOLE MlLL HOUSING[J];JOURNAL OF BAOTOU UNIVERSITY OF IRON AND STEEL TECHNOLOGY;1994-01
6 Yu Hui Xu Shimin Du Fengshan (The College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004);Investigation of Dynamic Characteristics and Strength for the Rolling Mill[J];Journal of Yanshan University;2004-03
7 LI Hong-nan 1, CHANG Zhi-guo 2,ZHAO Bo-dong 3 (1.Dalian University of Technology, Dalian 116024, China; 2.Shenyang Architectural and Civil Engineering Institute, Shenyang 110015, China;3.Shenyang, Dalian, Shenyang 110044,China);Study on optimization of structural vibration control by GA[J];Earthquake Engineering and Engineering Vibration;2002-05
8 LIN He ZOU Jiaxiang YUE Hailong (University of Science and Technology Beijing);FOUR-HIGH MILL STAND CHATTER OF THE THIRD-OCTAVE MODE[J];IRON AND STEEL;1999-12
9 LIN He; ZOU Jinxang; YUE Hailong (University of Science & Technology Beijing);INFLUENCE OF EMULSION LUBRIOANTS ON CHATTER OF COLD ROLLING MILL[J];IRON AND STEEL;1996-10
10 YANG Oijun(University of Petroleum) LIAN Jiachuang;DUAN Zhenyong(Yanshan University);STUDY ON DAMPERS OF 4-HIGH COLD ROLLNG MILL[J];IRON AND STEEL;1996-11
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved