Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2015-03
Add to Favorite Get Latest Update

Research on numerical simulation of hot isostatic pressing for turbine disk shaped by TC11 titanium alloy powder

Yu Si;Lang Lihui;Yao Song;Wang Gang;Bu Guoliang;Xu Qiuyu;School of Mechanical Engineering and Automation,Beihang University;Institute of Chemical Materials,CAEP;  
The turbine disk with complex structure was shaped by the process of hot isostatic pressing( HIP). Two schemes of powder net shaping and powder-solid diffusion shaping were designed. The processes of the above schemes were simulated by software of MSC. MARC with the parameters of TC11 titanium alloy inserted in Shima model. The results show that the mould deformation of powder net shaping is about two times bigger than that of the powder-solid diffusion shaping. Furthermore,after HIP of the powder by powder net shaping,the density gradient distribution is obvious in the key parts,and the relative density is also lower,however,the relative density distribution of the powder-solid diffusion shaping is better than that of the powder net shaping. Therefore,the powder-solid diffusion shaping scheme is better than that of the powder net shaping scheme. The experimental results show that the hot isostatic pressing process can realize the net forming of the closed turbine disk.
【Fund】: 国家科技重大专项(2009ZX04005-041)
【CateGory Index】: TF124.3
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 ZHANG Yi-wen(High Temperature Materials Research,CISRI,Beijing 100081,China);DEVELOPMENT IN HIP TECHNOLOGY[J];Powder Metallurgy Industry;2009-04
2 YAO Song,LANG Li-hui,BU Guo-liang,ZHANG Dong-xing,WANG Gang(School of Mechanical Engeering and Automation,Beihang University,Beijing 100191,China);Comparison of numerical simulation between hot isostatic pressing and warm compaction on Ti-6Al-4V[J];Forging & Stamping Technology;2013-03
3 Liu Guocheng Shi Yusheng Wei Qingsong Xue Pengju(State Key Laboratory of Material Processing and Die and Mould Technology, Huazhong University of Science and Technology,Wuhan 430074,China);Numerical simulation of the densification of 316L powder during hot isostatic pressing[J];Journal of Huazhong University of Science and Technology(Natural Science Edition);2011-10
4 Li Liang , Sun Jianke , Meng Xiangjun (Luoyang Ship Materials Research Institute, Luoyang 471039, China);Application State and Prospects for Titanium Alloys[J];Titanium Industry Progress;2004-05
5 Han Yongqi(Penglai Economic and Trade Bureau,Penglai 265600,China);On Current Opportunity and Challenge Encountered by China Ti Industry[J];Titanium Industry Progress;2006-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Cheng Jigui, Xia Yonghong ( Department of Material Science and Engineering, Hefei University of Technology 230009) Wang Hualin, Xu Weibing (Department of Chemical Engineering, Hefei University of Technology 230009);STUDY ON THE WARM COMPACTION BEHAVIORS OF PS/Cu POWDER[J];Engineering Plastics Application;2000-06
2 PENG Mao-gong 1, KANG Ro-gu 2, WANG Yun-kun 1, ZHANG Jia-min 1, LIOU Ke-cheng 2 (1.Kunming Metallurgy Research Institute, Kunming 650031, China; 2.Kunming Metallurgy Research & New Material Co.Ltd, Kunming 650031, China);Study of forgeability of dispersion-strengthened copper material with high strength and high conductivity[J];Ordnance Material Science and Engineering;2003-01
3 LIN Yun1,2,ZHANG Wen-xing1,CHAI Dong-lang1,QI Zhi-wang3,SHI Hong-gang3(1.School of Material Science and Technology,Xi'an Jiaotong University,Xi'an 710049,China;2.Guiyang University,GuiYang 550005,China;3.Ningbo Branch of China Academy of Ordance Science,Ningbo 315103,China);Effect of stored energy on sintering process of pure metal powders[J];Ordnance Material Science and Engineering;2006-04
4 TIE Yong-liang,HE Zhao-Rong(Schoole of Mechanical & Electrical Engineering,University of Maoming,Maoming 525000,China);One-side welding and double-forming welding procedure of TA2 argon tungsten-arc welding[J];Ordnance Material Science and Engineering;2006-04
5 LI Yu-yu,ZHANG Ren-yuan (Faculty of Materials and Energy,Guangdong University of Technology,Guangzhou 510090,China);Research on hot-press sintering process of N type thermoelectric materials ZnO[J];Ordnance Material Science and Engineering;2008-05
6 QU Kepeng1,KONG Junli1,WEI Jianfeng2,ZHAO Yongqing3 (1.Xi′an Modern Chemistry Institute,Xi′an 710065,China;2.State Key Laboratory for Mechanical Behavior of Materials, Xi′an Jiaotong University,Xi′an 710049,China;3.Northwest Institute for Nonferrous Metal Research,Xi′an 710016,China);Fracture behavior of a new titanium alloy by semi-solid forging[J];Ordnance Material Science and Engineering;2011-01
7 MA Yunzhu,HUANG Qianfang,LIU Wensheng (State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Research progress of coatings on fiber-reinforcements in metal matrix composite[J];Ordnance Material Science and Engineering;2011-04
8 LI Yanping, HU Xuesheng,GUO Shiju Advanced Technology and Material Co. Ltd., Beijing 100081, China Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Warm compacting and sinter hardening behavior of an iron-based alloy consisting Fe-Mo-B pre-alloyed powder[J];Journal of University of Science and Technology Beijing;2006-05
9 CUI Dawei1,2),QU Xuanhui1),GUO Ping2),LI Ke1)1) School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China 2) Department of Mechanical and Electronic Engineering,Weifang University,Weifang 261061,China;Sintering of nickel-free high nitrogen 0Cr17Mn11Mo3N stainless steel prepared by powder injection molding[J];Journal of University of Science and Technology Beijing;2008-10
10 WANG Lin,WANG Fu-chi,ZHANG Zhao-hui,LIAO Qiu-jin(School of Materials Science and Engineering,Beijing Institute of Technology,Beijing 100081,China);Influence of Sintering Pressure on the SPS of Powdered Copper[J];Transactions of Beijing Institute of Technology;2006-10
China Proceedings of conference Full-text Database 10 Hits
1 ;Failure Analysis of wall thinning of titanium tube in a condenser[A];[C];2011
2 Chen Biao,Qiu Qiyan,Cao Zhenghua (Beijing Aeronautical Manufacturing Technology Research Institute,Beijing 100024);Adhesively-bonded Cocured Tecnology Used on Ripple-girder and Titanium Alloy Joints[A];[C];2006
3 CHEN Lin1, XUN Chun2 (1. Baoshan Iron & Steel Co., Ltd. Baosteel Branch, Shanghai 201900, China; 2. Shanghai Institute of Application Technology, Shanghai 200233, China);Study on Flow Stress of Hot Formation for Commercial Pure Titanium TA2[A];[C];2008
4 Liu Xuemei,Song Xiaoyan,Zhang Jiuxing College of Materials Science and Engineering,Key Laboratory of Advanced Functional Materials,China Ministry of Education,Beijing University of Technology,Beijing 100124,P.R.China;Study on mechanism of homogeneous neck growth of conductive pure materials during SPS[A];[C];2009
5 ZHAO Ning (China Jianzhong Nuclear Fuel Co.,Ltd,Yibin of Sichuan Prov.644000,China);Dry technology and the influence of powder physical characteristics[A];[C];2009
6 WANG Bang-wu,CHEN Ying (China Jianzhong Nuclear Fuel Co.,Ltd Yibin of Hubei Prov.644000,China);The treatment of large quantities of high fluorin contents UO_2 by ammonium double uranate(ADU) techniques[A];[C];2009
7 ZHAO Ning;Dry technology and the influence of powder physical characteristics[A];[C];2009
8 Huang Chuanbing~(1,2) Du Lingzhong~1 Zhang Weigang~1 (1.State Key Laboratory of Multi-Phase Reaction Engineering,Institute of Process Engineering,Chinese Academy of Sciences.Beijing 10080,China;2.Graduate University of Chinese Academy of Sciences,Beijing 100049,China);Microstructure and tribological properties of plasma spray NiCr-Cr_3C_2-BaF_2/CaF_2 coating[A];[C];2008
9 YAN Zhi-qiao,CAI Yi-xiang (Guangzhou Research Institute of Non-ferrous Metals,Guangzhou 510650,China);Progress and trend of high velocity compaction technology[A];[C];2010
10 HE Zhao-jun WANG Wei-jin LIU Xiao-ming YANG Ning ZHU Yu-bin (School of Material Science and Engineering,Shanghai University,Shanghai 200072,China);Sintering behavior of thin W-Cu sheet compact[A];[C];2007
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 DONG Jianxin, HE Dong, ZHANG Maicang, ZENG YanpingMaterials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China;Dynamic Simulations of Element Mutual Diffusion during Hot Isostatic Pressing Diffusion Bonding[J];Journal of University of Science and Technology Beijing;2003-01
2 ZHAO Yongqing WEI Jianfeng GAO Zhanjun LI Yuelu WU Huan LIU Caili FENG Liang CHANG Hui ( Northwest Institute For Nonferrous Metal Research,Xi'an 710016; School of Environmental and Chemical Engineering,Xi'an Jiaotong University,Xi'an 710049; Chinese Academy of Engineering,Beijing 100038);Titanium Alloys:Current status of Application and Low Cost Manufacturing Technologies[J];Materials Review;2003-04
3 OUYANG Hongwu LIU Yong HE Yuehui HUANG Boyun (State Key Laboratory for Powder Metallurgy,Central South University,Changsha 410083);Development and Application of TiAl-Based Alloy Valves[J];Materials Review;2003-04
4 Luo Guozhen(Northwest Institute for Nonferrous Metal Research, Baoji 721014);Research and Development Review for Titanium[J];Rare Metal Materials and Engineering;1993-05
5 Zheng Guoqing, Ren Huping, Kou Xiandong,Wang Jian,Zheng Guoxi, Chan Heiuen, Zhang Ping, Chan Yuping(Xi′an Jiatong University, Xi′an 710061, China);Research of Movable Ti-retractor of Boby′s Sternumand Rib and Its Application in Open Heart Operation[J];Rare Metal Materials and Engineering;2001-04
6 Zhang Xinping, Yu Sirong, Xia Lianjie, He Zhenming (Jilin University, Changchun 130025, China);The Present Status of Ti and Ti Alloys in Dentistry[J];Rare Metal Materials and Engineering;2002-04
7 Zhou Lian ( Northwest Institute for Nonferrous Metal Research, Xi'an 710016, China);Review of Titanium Industry Progress in America, Japan and China[J];Rare Metal Materials and Engineering;2003-08
8 HAN Feng-lin(PM Association of Machine Ceneral Parts Industry Society, Beijing 100825,China);PROGRESS IN MODELING OF HIP[J];Powder Metallurgy Industry;2005-01
9 ZHANG Yi-wen(High Temperature Materials Research,CISRI,Beijing 100081,China);DEVELOPMENT IN HIP TECHNOLOGY[J];Powder Metallurgy Industry;2009-04
10 ZHAN Li-hua,WANG Fang-fang,HUANG Ming-hui(State Key Laboratory of High Performance Complex Manufacturing,Central South University,Changsha 410083,China);MARC FE analysis on influences of different contact analysis methods on calculation precision[J];Forging & Stamping Technology;2012-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved