Process Analysis and Treatment for Die & Mould on WDEM
LIN Chaoping (Changshu College of Science & Technology, Changshu 215500, Jiangsu China)
According to process analysis for die and mould parts on WDEM,the process treatment measures have been presented to enhance production efficiency and processing quality.
【CateGory Index】:
TG48
|
|
Chinese Journal Full-text Database |
10 Hits
|
|
|
1 |
Ge Zhenghao, Xu Feng, Li Siyi (Mechanical & Electrical Engineering College, Shanxi University of Science & Technology, Xianyang 712081, China);APPLICATION OF THE TOP-DOWN METHOD IN THE MOULD DESIGN[J];Engineering Plastics Application;2003-05 |
2 |
Niu Xiaotie (Beijing Vocational & Technical Institute of Industry,Beijing 100042,China);Methods of Presetting Cutter in NC Machining[J];Journal of Beijing Vocational & Technical Institute of Industry;2003-02 |
3 |
WANG Chang YU Tong-min ZHOU Jin-jin;Application of Surface Engineering Techniques in the Manufacturing of Moulds[J];China Surface Engineerign;2002-01 |
4 |
ZHOU Chun-hua, SUN Tao (Changsha Aeronauticl Vvocational and Techaical College, Changsha Hunan 410124);Design of the shank[J];Journal of Changsha Aeronautical Vocational and Technical College;2003-02 |
5 |
ZHOU Chun-hua (Changsha Aeronauticl Vocational and Technical College, Changsha Hunnan 410124);A Discussion on Grinding Cracks Caused by Die & Mould-repolishing[J];Journal of Changsha Aeronautical Vocational and Technical College;2003-04 |
6 |
ZENG Ping(Wuhan Institute of Shipbuilding Technology,Wuhan 430050,China);Research for welding technology of blade of the cold trimming die surfacing[J];Electric Welding Machine;2004-11 |
7 |
Liu Fei;The methods to improve the die lifetime[J];Electromachining & Mould;2003-02 |
8 |
Lu Yuwei;Application of CAD/CAM in mould and die manufacturing[J];Electromachining & Mould;2004-S1 |
9 |
Lan Haigen,Zhang Qisheng (North University,Taiyuan 030051,China);The Calculation and Application of Offset in WEDM Machining the Blanking Die[J];Electromachining & Mould;2006-01 |
10 |
Lin Chaoping (Changshu Institule of Technology,Changshu 215500,China);Application of the Second Wire Cut Method in WEDM for Die and Mould Machining[J];Electromachining & Mould;2006-02 |
|