Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《》 2005-04
Add to Favorite Get Latest Update

Experiment Study on Power Spinning of Cylinders with Inner Ribs

ZHANG Lipeng1, LIU Zhichong2, ZHOU Hongyu3 (1.College of Automobile & Traffic Engineering Liaocheng University,Liaocheng 252059,Shandong China;2.Dicastal Wheel Manufacturing Co.Ltd,Qinhuangdao 0066003,Hebei China;3.Beijing EHE Machinery & Electronic Company,Beijing 100043)  
Trough choosing different professing parameters including the ratio of thinning and the ratio of feeding and using two rollers power spinning machine experiment research on cylinders with inner ribs has been started. According to the result of the experiment, the reasons of every kind of production defect have been analysed and some solutions put forward so as to provide theories and practice basis for reduction of loss of large-scale production and qualified work pieces production.
【CateGory Index】: TG376
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 XIA Qin-xiang,LI Xiao-man,LI Xiao-long,ZHOU Chi,ZHANG Shi-jun(School of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China);Experimental research and numerical simulation on cup-shaped thin-walled trapezoidal inner gear formed by spinning[J];Forging & Stamping Technology;2008-06
2 YANG Hefa1, CHENG Xiuquan1, HU Yu2, XIA Qinxiang2 (1.Department of Airplane Maintenance Engineering,Guangzhou Civil Aviation College,Guangzhou 510403, China; 2.College of Mechanical Engineering, South China University of Technology, Guangzhou 510640, China);Application and Prospect of Spinning Technology on Inner Gear[J];China Metal Forming Equipment & Manufacturing Technology;2007-01
3 SUN Ling-yan,YE Bang-yan,XIA Qin-xiang(School of Mechanical and Automobile Engineering,South China University of Technology,Guangzhou 510640,China);Influence of preformed blank on spin-forming of cup-shaped thin-walled trapezoidal inner gear[J];Forging & Stamping Technology;2010-01
4 XIA Qinxiang~1 YANG Minghui~1 HU Yu~1 CHENG Xiuquan~2 (1.College of Mechanical Engineering,South China University of Technology,Guangzhou 510640; 2.Department of Airplane Maintenance Engineering,Guangzhou Civil Aviation College,Guangzhou 510403);NUMERICAL SIMULATION AND EXPERIMENTATION CUP-SHAPED THIN-WALLED INNER RECTANGULAR GEAR FORMED BY SPINNING[J];Chinese Journal of Mechanical Engineering;2006-12
【Citations】
Chinese Journal Full-text Database 2 Hits
1 XUE Ke-min, JIANG Shu-yong, KANG Da-chang (School of Materials Science and Engineering , Harbin Institute of Technology Harbin, 15001 China);Power spinning deformation of thin-walled cylinders with longitudinal inner ribs[J];Material Science and Technology;2002-03
2 YANG Yan-tao, ZHANG Li-wu, HAN Dong (The 7414~(th)Factory of the Fourth Academy of CASC, Xi'an 710025,China);Research on process database system for powerful spinning of tubular workpiece[J];Heavy Machinery;2004-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 HUANG Liang,YANG He,ZHAN Mei(State Key Laboratory of Solidification Processing,School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China);Development of the research on splitting spinning[J];Materials Science and Technology;2008-04
2 JIANG Shu-yong~1,XUE Ke-min~2,LI Chun-feng~1,LU Yan~1 (1.School of Material Science and Engineering,Harbin Institute of Technology, Harbin Heilongjiang 150001,China; 2.School of Material Scrience and Engineering,Hefei University of Technology, Hefei Anhui 230000,China;);Analysis of ball spinning formability of thin-walled tubular parts of aluminum alloy[J];Forging & Stamping Technology;2005-04
3 ZHANG Li-peng~(1),LIU Zhi-chong~(2)(1.School of Automobile and Transportation Engineering,Liaocheng University,Liaocheng Shandong 252059,China;2.Dicastal Wheel Manufacturing Co.,LTD,Qinhuangdao Hebei 066003,China);Analysis of power spinning process parameters selection mode for cylinders[J];Forging & Stamping Technology;2006-01
4 ZHAO Lin-yu HAN Dong ZHANG Li-wu LI Zeng-hui WANG Bei-ping YANG Yan-tao GONG Jun-shan (Xi'an Aerospace Power Machine Factory,Xi'an 710025,China);Typical application and development of metal spinning technology and equipment[J];Forging & Stamping Technology;2007-06
5 YANG Hefa1, CHENG Xiuquan1, HU Yu2, XIA Qinxiang2 (1.Department of Airplane Maintenance Engineering,Guangzhou Civil Aviation College,Guangzhou 510403, China; 2.College of Mechanical Engineering, South China University of Technology, Guangzhou 510640, China);Application and Prospect of Spinning Technology on Inner Gear[J];China Metal Forming Equipment & Manufacturing Technology;2007-01
6 ;The Application of Spinning Technology on Manufacturing Axial-flow Compressor[J];Compressor,Blower & Fan Technology;2009-04
7 XIA Qinxiang~1 YANG Minghui~1 HU Yu~1 CHENG Xiuquan~2 (1.College of Mechanical Engineering,South China University of Technology,Guangzhou 510640; 2.Department of Airplane Maintenance Engineering,Guangzhou Civil Aviation College,Guangzhou 510403);NUMERICAL SIMULATION AND EXPERIMENTATION CUP-SHAPED THIN-WALLED INNER RECTANGULAR GEAR FORMED BY SPINNING[J];Chinese Journal of Mechanical Engineering;2006-12
8 ZHANG Tao1 LIU Zhichong1 MA Shicheng2 (1.College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004; 2.The 5th Graduate School, China Weapon Combine, Changchun 130012);TECHNOLOGIC RESEARCH AND NUMERICAL ANALYSIS OF SPINNING OF CYLINDERS WITH INNER RIBS[J];Chinese Journal of Mechanical Engineering;2007-04
9 ZHAO Chuan-bo(Northeast Forestry University,Heilongjiang Harbin 150040,China);Design of Tool and Experimental Study with Respect to Ball Spinning Forming of Thin-walled Tubular Parts[J];Forestry Machinery & Woodworking Equipment;2005-02
10 XIA Qin-xiang 1,YANG Ming-hui 1,CHEN Jia-hua 1,CHENG Xiu-quan 2(1.South China University of Technology,Guangzhou,Guangdong 510640,China; 2.Guangzhou Civil Aviation College,Guangzhou,Guangdong 510403,China);Numerical simulation of influence of technological parameters on spinforming of proculiform inside engaged gear[J];Die & Mould Industry;2006-12
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 XUE Ke-min, JIANG Shu-yong, KANG Da-chang (School of Materials Science and Engineering , Harbin Institute of Technology Harbin, 15001 China);Power spinning deformation of thin-walled cylinders with longitudinal inner ribs[J];Material Science and Technology;2002-03
2 XU Wen-chen, SHAN De-bin, LU Yan,LI Chun-feng (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China,);Research on the multi-pass shear spinning technology of small-angle conical workpieces[J];Material Science and Technology;2004-01
3 XU Yin-li,ZHAN Mei,YANG He,ZHANG Jin-hui,MA Fei(College of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072,China);Springback law analysis of cone spinning using 3D FEM[J];Materials Science and Technology;2008-02
4 Zhou Zhaoyao; Lu Yan; Wan Huibin; Zhao Xiangming (Harbin Institute of Technology);A Rigid-plastic FEM Analysis of the Plastic Flow Field of Backward Spining[J];MATERIAL SCIENCE AND TECHNOLOGY;1994-02
5 LI Hong-bo 1 ,LV Mei 1 ,ZHANG Yu-hua 1 ,ZHAO Jun 1 (1. College of Mechanical Engineering, Yanshan University, Qinhuangdao, Hebei 066004, China);3D numerical simulation on new method of precision forging processing for straight inner gear[J];Journal of Yanshan University;2005-06
6 Li Jiquan1,Yang Ding2,Huang Zhigao3,Guo Zhiying1,Li Dequn3 (1.Shanghai Jiaotong University,Shanghai 200030,China;2.Sichuan Vocational and Technical College,Suining 629000,China;3.Huazhong University of Science & Technology,Wuhan 430074,China);Research Situation of Robust Design in Material Forming[J];Electromachining & Mould;2008-01
7 Northwestern Polytechnical Univresity L i Kezhi L i Hejun Harbin Institute of Technology Xue Kemin Lu Yan;Influence of process parameters on residual stress distribution in backward tube spinning[J];Forging & Stamping Technology;1997-04
8 Shandong Institute of Technology Xiao Zuoyi;New technology of power spinning for tube parts—floating mandrel spinning[J];FORGING & STAMPING TECHNOLOGY;1999-05
9 Shanghai Jiaotong University Lin Xinbo Zhai Fubao Zhang Zhiliang Ruan Xueyu;Research on stagger spinning defects of tube parts by FEM[J];Forging & Stamping Technology;2002-04
10 South China University of Technology Xia Qinxiang Ruan Feng Kyoto University Susumu Shima Hidetoshi Kotera Daifu Yasuhuku;Study on one-pass deep drawing spinning of cups[J];Forging & Stamping Technology;2002-06
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 XIA Qin-xiang,LI Xiao-man,LI Xiao-long,ZHOU Chi,ZHANG Shi-jun(School of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China);Experimental research and numerical simulation on cup-shaped thin-walled trapezoidal inner gear formed by spinning[J];Forging & Stamping Technology;2008-06
2 CHENG Xiu-quan1,SHANG Yue2,XIA Qin-xiang2(1.Department of Aircraft Maintenance Engineering,Guangzhou Civil Aviation College,Guangzhou 510403,China;2.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510641,China);Experimental research on spin-forming of cup-shaped thin-walled trapezoidal inner-gear[J];Forging & Stamping Technology;2009-01
3 XIA Qinxiang, LI Xiaoman, LI Xiaolong, WANG Jiazi, ZHANG Shijun (South China University of Technology, School of Mechanical Engineering,Guangzhou 510640,Guangdong China);Manufacture of Cup-shaped Thin-walled Trapezoidal Inner Gear Spun Workpiece and Research of Metallographic Organization[J];China Metal Forming Equipment & Manufacturing Technology;2008-01
4 DONG Hong-bo,WANG Gao-chao (School of Materials Science and Engineering,Nanchang Hangkong University,Nanchang 330063,China);Spin-forming numerical simulation of cup-shaped inner meshing gear[J];Forging & Stamping Technology;2009-04
5 XIA Qin-xiang1,WANG Jia-zi1,WANG Ying-pin1,LIN Ye-hai2,MA Zhe-ming2 (1. School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China;2. Zhongshan Jonjee Precision Machinery Co.,Ltd.,Zhongshan 528400,China);Analysis on metal flow and deformation mechanism during thickening process of poly-wedge pulley spinning[J];Forging & Stamping Technology;2009-06
6 SUN Ling-yan,YE Bang-yan,XIA Qin-xiang(School of Mechanical and Automobile Engineering,South China University of Technology,Guangzhou 510640,China);Influence of preformed blank on spin-forming of cup-shaped thin-walled trapezoidal inner gear[J];Forging & Stamping Technology;2010-01
7 LUO Du-yu1,XIA Qin-xiang2,SUN Ling-yan 2(1.Mechanical and Electrical Engineering Department,Guangdong Polytechnic College,Guangzhou 510520,China;2.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China);Cup-shape blank design of inner-gear spinning[J];Forging & Stamping Technology;2010-02
8 HAO Ji-dong1,XING Zhao-bin2,QIN Sheng-xue1,2,WU Feng-ling2(1.College of Mechanical and Electronical Engineering,Shandong University of Science and Technology,Qingdao 266510,China;2.Die and Mould Subsidiary Company of Shandong Xiaoya,Ji'nan 250101,China);Three-dimensional numerical simulation of power spinning for cone part[J];Forging & Stamping Technology;2010-03
9 Li Xiao-man,Gui Yan (Guangzhou panyu polytechnic,Department of mechanical and electrical engineering,Guangzhou Guangdong 511400,China);Research on the development of gear technology by spinning[J];Mechanical Research & Application;2009-03
10 Li Yong Xu Ze-chuan Tang Yong Zeng Zhi-xin(School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China);Numerical Simulation of High-Speed Spinning of Thin-Wall Copper Tube with Axial Micro-Grooves[J];Journal of South China University of Technology(Natural Science Edition);2010-01
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 ;CAD/CAM system for power spinning of tube workpiece[J];METALFORMING MACHINERY;1999-01
2 WU Yan, SUN Ai guo (Dept. of Mechanical Engineering, North China Institute of Technology, Taiyuan 030051, China);Module Design for the Post Processing of the CAD/CAM System for Power Spinning[J];Journal of North China Institute of Technology;2002-01
3 ZHAO Xian ming 1, WU Di 1, LU Yan 2, XUE Ke min 2 (1. Northeastern University, The State Key Laboratory of Rolling and Automation, Shenyang, 110006, China) (2. Harbin Institute of Technology, Dep. of Material Science and Engineering, Harbin 150001;FEM analysis of spinning pressure for forward tube flow forming[J];Journal of Harbin Institute of Technology;2000-04
4 XUE Ke min 1, LI Ping 1, LU Yan 1, KAWAI Kenichi 2 (1. School of Materials Science and Eingineering, Harbin Institute of Technology, Harbin 150001, China; 2. Yokohama National University);Influence of process parameters on tangential strain in tube spinning[J];Journal of Harbin Institute of Technology;2001-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved