Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Metal Forming Equipment & Manufacturing Technology》 2007-01
Add to Favorite Get Latest Update

Research on Die-face Design for Automotive Panels

SUN Yu, WANG Yilin (State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074,Hubei China)  
The method and principle of panel die-face design have been researched with analysis of deficiency and strongpoint of present development methods.Upon which the design procedure based on KBE and the design methods of the template-based parametric section curves on addendum surface have been proposed by applying a knowledge-based engineering approach in the die-face design. The knowledge-driven design for panel die-face design has been realized by using the control curves embedded into engineering rules constrain, the section curves and generate addendum and blankholder surface,which improve the automatic and intellectual level of the stamping process planning for automotive panels.
【Fund】: 汽车车身先进设计制造国家重点实验室开放基金资助项目
【CateGory Index】: TG385.2
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 2 Hits
1 LIU Gang,CHENG Ying-chao,JIANG Gu-ming,WU Peng-fei (Die Center,Shanghai Volkswagen Co.,Ltd.,Shanghai 201805,China);Stamping process improvement of rear cover outer top[J];Forging & Stamping Technology;2009-06
2 QIN Jian (Xuzhou Metalforming Machine(Group) Co.,Ltd.,Xuzhou 221116,Jiangsu China);New Forming Technology of Outer Arc Surface for Linkage in Press[J];China Metal Forming Equipment & Manufacturing Technology;2011-02
【Citations】
Chinese Journal Full-text Database 5 Hits
1 HUANG Yo ng,ZHENG Jinqiao,WANG Yilin,LI Zhigang(National Laboratory of Plastic Formi ng Simulation and Die&Mould Technique,Huazhong University of Science&Technolo gy,Wuhan430074,Hubei China);Knowledge Driving Drawing Process Part Modeling in Panel die Design[J];;2003-02
2 WANG Yi-lin,ZHENG Jin-qiao,LI Zhi-gang(State Key Lab of Plastic Forming Simulation and Die&Mould Technology, Huazhong University of Science&Technology,Wuhan,Hubei430074,China);Design of drawing operation part based on section control curve model[J];Die & Mould Industry;2006-04
3 YAO Xing, CHEN Jun, SHI Xiao-xiang et al;Addendum And Binder Surface Parametric Design for Automotive Panel Drawing Die[J];Die and Mould Technology;2002-04
4 Wu Bojie,Zhao Shu;Development of preferences design of the drawing process complementary surface automobile panel based on UGⅡ[J];Machinery Manufacturing Engineer;2003-04
5 Wang Yiling; Wang Gengyun; Li Zhigang et al.;Research and Implementation of Optimum Design Method for Dieface[J];CHINA MECHANICAL ENGINEERING;1995-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 HUANG Yanping (Department of Machine Electrical System,Shanghai Electronic Information Institute ,Shanghai 201411);Mechanics Factor Processes Which with the Finite Element Method Analysis Forging[J];Journal of Changchun University of Science and Technology(Natural Science Edition);2008-03
2 Wang Heng;Current situation and development tendency of designing autobody outpanels' drawing dies[J];Electromachining & Mould;2001-02
3 Xu Huijuan, et al.;The present situation of designing and thefuture prospecting of autopanel deep drawing die[J];Electromachining & Mould;2004-S1
4 ZHOU Jie~1,YANG De-sen~1,LUO Zheng-zhi~1,Li Hui~2,Li Ze~2,Gao Yang~3(1.College of Machanical Engineering,Chongqing University,Chongqing 400044,China;2.Chongqing Chang'an-Suzuki Automobiles Co.,Ltd.,Chongqing 401320,China;3.Chongqing Dajiang Industry Group,Chongqing 401320,China);Finite element analysis and optimization of blank for fender groupware[J];Forging & Stamping Technology;2006-01
5 ZHANG Xu~1,ZHOU Jie~1,HE Guang-chun~1,ZHANG Yan-qing~1,FENG Xiang~2,YANG Ming~2(1.College of Mechanical Engineering,Chongqing University,Chongqing 400044,China;2.Wuliangye Group Push Mold & Die Ltd.,Yibin 401121,China);Forming analysis and optimization of car's taillight pedestal based on numerical simulation of fem[J];Forging & Stamping Technology;2006-04
6 WANG Wei,SHI Fa-zhong(School of Mechanical Engineering and Automation,Beijing University of Aeronautics andAstronautics,Beijing 100083,China);Process addendum's parametric design in panel drawing die modeling[J];Forging & Stamping Technology;2007-02
7 CHEN Junyong,WANG Gengyun,LI Zhigang(National Laboratory of Die&Mould Technique,Huazhong University of Science&Technology,Wuhan430074,Hubei China);Study on 3D CAD of Panel Die & Its Key Algorithms[J];;2003-04
8 WU Bojie, JIANG Zhi(Tsinghua University, Beijing 100084, China);Optimization Design of Drawing Pieces of Automobile Panels[J];;2004-06
9 LI Jianxin, XIANG Huiyu(School of Mechanical Engineering,Shandong University,Jinan 250061,China);The Parametric Design of Addenda for the Autobody Panel Part[J];;2005-01
10 LI Yan,WANG Gengyun(State Key Lab of Plastic Forming Simulation And Die & Mould Tech.Huazhong University of Science and Technology,Wuhan 430074,Hubei China);Study on Three-Dimensional CAD System of Panel Die and Technology of Sophisticated Surface Treatment[J];;2005-02
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 HU Chun YOU Fei (Department of Mechanical Engineering, Jiangsu Teachers University of Technology,Changzhou 213001);Design of Press Direction Optimization System of Automobile Covering Panels[J];Journal of Changzhou Institute of Technology;2005-02
2 Xing Longbin,Wang Minjie,Zhao Danyang,Yu Qing'an,Song Mancang (Dalian University of Technology,Dalian 116023,China);Present Situation and Development of CAPP Technology for Mould and Die[J];Electromachining & Mould;2008-01
3 Beijing University of Aero & Astro Xu Bingkun\ Shi Fazhong;Establishment and implementation of equivalent drawbead model in sheet metal forming numerical simulation[J];Forging & Stamping Technology;2000-06
4 WANG Chang~(1,2),HE Yu-lin~(2),HU Ya-min~(1),XU Nanshao~(1)(1.Automobile Engineering Faculty,Chongqing Institute of Technology,Chongqing 400050,China;2.College of Mechanical Engineering,Chongqing University,Chongqing 400044,China);Application and practice for addenda of stamp forming process of auto-body panel[J];Forging & Stamping Technology;2006-05
5 HU Jiang-bo,LIU Yu-qi,ZHANG Zhi-bing(State Key Laboratory of Material Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China);Process design and optimization of drawbead on autobody panel die[J];Forging & Stamping Technology;2008-01
6 HUANG Yo ng,ZHENG Jinqiao,WANG Yilin,LI Zhigang(National Laboratory of Plastic Formi ng Simulation and Die&Mould Technique,Huazhong University of Science&Technolo gy,Wuhan430074,Hubei China);Knowledge Driving Drawing Process Part Modeling in Panel die Design[J];;2003-02
7 NI Hongqi, LIU Xianghua, WANG Guodong(national Key Lab of Rolling Technique & Continuous Rolling Automation,Northeastern University,Shenyang 110004, Liaoning China);Numerical Simulation of Sheet Metal Stamping Process[J];;2004-04
8 HUANG Haifeng ( Department of Technology of Plasticity Shanghai Jiao Tong University, Shanghai 200030, China );Optimization of the Stamping Direction Based on UG NX Platform for Automotive Panels[J];China Metal Forming Equipment & Manufacturing Technology;2006-02
9 LI Mingkun (Chengdu Industrial School, Chengdu 610081, Sichuan China);Computer Numerical Simulation of Sheet Forming[J];China Metal Forming Equipment & Manufacturing Technology;2006-04
10 CHEN Yaping, YE Chunsheng, HUANG Shuhuai (State Key Lab of Plastic Forming Simulation and Die &Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, Hubei China);Factors Analysis of Extruded Filament Width in FDM Molding Process[J];China Metal Forming Equipment & Manufacturing Technology;2007-02
【Secondary References】
Chinese Journal Full-text Database 2 Hits
1 LI Xue,CHENG Ying-chao,LIU Gang,JIANG Gu-ming(Die Center,Shanghai Volkswagen Co.,Ltd.,Shanghai 201805,China);Sheet metal stamping analysis of automobile side-panel[J];Forging & Stamping Technology;2011-03
2 ZHONG Jiang-jing1,ZHOU Meng-rong2,ZONG Yue2,LIANG Shi-hong1(1.Mechanical &Electrical Engineering Department,Suzhou Institute of Industrial Technology,Suzhou 215104,China;2.Suzhou Victory Precision Manufacture Co.,Ltd.,Suzhou 215000,China);Structure design improvement of support board's bending die[J];Forging & Stamping Technology;2011-03
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Zhang Weibo Wang Longshan(Jilin University, Changchun, 130025) Luo Hongyun(Jilin Institute of Technology);REALIZATION OF GENETIC ALGORITHM IN THE SEQUENCING OF MACHINING OPERATIONS AND A DISCUSSION OF RELEVANT PROBLEMS[J];Acta Armamentarii;2002-02
2 CHEN Si zhong, WANG Tian lin, LIN Cheng, WU Zhi cheng (School of Vehicular Engineering, Beijing Institute of Technology, Beijing100081);The Car Body Panels Parameterized Modeling Method Based on Features[J];JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY;2000-03
3 XU Wei li 1, LIN Zhong qin 2,LU Jiang xin 1 , WANG Cheng pu 1(1.R&D Center, Baosteel company,Shanghai 200000, China; 2.Research Lab for Automotive engineering, School of mechanical engineering, Shanghai Jiao Tong university, Shanghai 200030, China;Application of dynamic simulation in auto-body panel stamping[J];Material Science and Technology;2001-03
4 SUN Zhen-zhong~1,XUE Yao~2, YE Zhong-qi~1,YANG Yu-ying~1 (1.Dept. of Materials Science and Engineering, Harbin Institute of Technology, Harbin, 150001, China;2. The First Automobile Group Corporation, changchun, 130011, China);The experiment analysis and finite-element simulation on stability of complex sheet metal part drawing[J];Material Science and Technology;2004-01
5 LIU Yu-qi, DU Ting, ZHANG Zhi-Binggy, Huzhong University of Science and Technology, Wuhan 430074,China,);Sheet forming fast analysis system for product and mold design FASTAMP[J];Material Science and Technology;2004-04
6 ZHENG Qing chun 1,XU Yan shen 1,HOU Liang 1, NIU Wen tie 1,CHEN Jun 1,CHANG Shi ping 2 (1.Tianjin University,Tianjin 300072; 2.Tianjin Motor Dies Co.Ltd.,Tianjin 300401,China)$$$$;The Research on Modular Design Technology in Automobile Panel Dies Oriented to Rapid Manufacturing[J];Group Technology & Production Modernization;2001-03
7 GAO Zhao\|fa 1, QIN Xu\|jia 1, OU Zong\|ying 1,2 ( 1. School of Mech. Eng., Dalian Univ. of Technol., Dalian 116024, China; 2. Open Lab. of CAD/CAM Technol. for Adv. Manuf., Acad. Sinica, Shenyang 110003, China );An intelligent feature\|based product model framework and its implementation[J];JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY;2000-02
8 National Mold & Dies CAD Engineering Research Center Bao Xiangjun Tao Hongzhi He Dannong Li Congxin Shanghai Volkswagen Automotive Company Ltd.(SVW) Cheng Jinglei Jiang Jingyu;Virtual manufacturing system for autopanel stamping based on Internet/Intranet[J];FORGING & STAMPING TECHNOLOGY;2000-04
9 Beijing University of Aero & Astro Xu Bingkun\ Shi Fazhong;Establishment and implementation of equivalent drawbead model in sheet metal forming numerical simulation[J];Forging & Stamping Technology;2000-06
10 Jiangsu University of Science & Technology Wang Heng;Optimization of autobody sheets'drawing direction by Pro/Dieface[J];Forging & Stamping Technology;2002-01
China Proceedings of conference Full-text Database 1 Hits
1 ;基于特征和知识的覆盖件冲压CAPP[A];[C];2000
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved