Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Metal Forming Equipment & Manufacturing Technology》 2010-05
Add to Favorite Get Latest Update

Research of Spreading Method for Box Rib Sheet Metal Parts

WU Jianjun,ZHANG Shunying,ZHANG Shen(The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology,Ministry of Education,Northwestern Polytechnical University,Xi'an 710072,Shanxi China)  
Against some problems such as concave feature and opened side walls in the spreading process of sheet metal parts,a new hybrid approach has been developed to avoid the element overlap and wrong spreading direction by combining the advantages of orthogonal length development method and radial spreading approach based on normal vector.Through practical application,the approach has been approved to be efficient.The obtained blank is more reasonable in shape.
【Fund】: 国家863基金资助项目(2008AA04Z120)
【CateGory Index】: TG386.32
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 WU Yaojin, ZHANG Zhimin (Material Engineering Dept. North University of China, Taiyuan 030051, ShanXi China);Spread Length Calculation of Sheet Metal with Multi-Bends[J];;2005-05
2 ZHANG Lecheng, ZHENG Zhizhen, LI Jianjun, XIAO Xiangzhi (State key Laboratory of Plastic Forming and Die & Mould Technology,Huazhong University of Science & Technology,Wuhan 430074,Hubei China);A Method of Unfolding of Bending Parts based on Feature Surfaces[J];China Metal Forming Equipment & Manufacturing Technology;2006-01
3 WU Jian-jun,XUE Xiao-ping(Northwestern Polytechnic University,School of Mechatronics,Key Lab.of Ministry of Contemporary Design and Integrated Manufacturing Technology,Xi'an 710072,China);Spreading method of sheet metal parts with multi-referenced points[J];Materials Science and Technology;2009-04
4 Wu Jianjun Li Shunping Northwestern Polytechnic University,Xi'an,710072;Study on Two Blank Design Methods for Deep Drawing Part[J];China Mechanical Engineering;2004-13
5 Wu Jianjun Yang HanpingKey Lab.of Ministry of Contemporary Design and Integrated Manufacturing Technology,Northwestern Polytechnic University,Xi'an,710072;Study on the Spreading Method of Sheet Metal Parts Considering Outside Normal[J];China Mechanical Engineering;2006-15
【Co-citations】
Chinese Journal Full-text Database 8 Hits
1 WU Jian-jun(The Key Lab.of Contemporary Design and Integrated Manufacturing Technology,Ministry of Education,Northwestern Polytechnical University,Xian 710072,China);Rapid development and forming simulation for deep drawing parts of orthotropic sheet metal[J];Materials Science and Technology;2008-01
2 WU Jianjun (School of Mechatronics,Northwestern Polytechnic University,Xi'an 710072,Shanxi China);Study on the Spreading Method of Sheet Metal Parts with Buckles[J];China Metal Forming Equipment & Manufacturing Technology;2007-05
3 ZHAO Maoyu1,2, XUE Kemin1,LI Ping1, ZHANG Yinyin2 (1.School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009; Anhui China-2.Department of Mechanical engineering,Hefei University,Hefei 230022; Anhui China );Research of Unfolding Complex Shape Autopanel based on Parallelogram-projection and Emit -projection Method[J];China Metal Forming Equipment & Manufacturing Technology;2007-06
4 TAO Wei, WANG Tao (West Branch of Zhejiang University of Technology, Quzhou 324000,Zhejiang China);The Expanding and Nesting Design of Blank Based on FEM[J];China Metal Forming Equipment & Manufacturing Technology;2007-06
5 WU Jian-jun,XUE Xiao-ping(Northwestern Polytechnic University,School of Mechatronics,Key Lab.of Ministry of Contemporary Design and Integrated Manufacturing Technology,Xi'an 710072,China);Spreading method of sheet metal parts with multi-referenced points[J];Materials Science and Technology;2009-04
6 ZHANG Shunying,WU Jianjun (Key Laboratory of Contemporary Design and Integrated Manufacturing Technology,Northwestern Polytechnical University,Xi'an 710072,Shanxi China);Spreading Method for Box Rib Sheet Metal Parts based on Dummy Elements[J];China Metal Forming Equipment & Manufacturing Technology;2009-06
7 MEI Jian-yun1,2,ZHOU Tian-rui1(1.School of Mechanical and Electrical Engineering,Nanchang University,Nanchang 330031;2.Dept.of Architectural and Civil Engineering,Nanchang Normal Institute for Technology,Nanchang 330038,Nanchang,Jiangxi);An overview on the CAPP/CAE integrated stamping system for automobile panels[J];Southern Metals;2009-02
8 Wu Jianjun Yang HanpingKey Lab.of Ministry of Contemporary Design and Integrated Manufacturing Technology,Northwestern Polytechnic University,Xi'an,710072;Study on the Spreading Method of Sheet Metal Parts Considering Outside Normal[J];China Mechanical Engineering;2006-15
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 LIU Yu-qi, DU Ting, ZHANG Zhi-Binggy, Huzhong University of Science and Technology, Wuhan 430074,China,);Sheet forming fast analysis system for product and mold design FASTAMP[J];Material Science and Technology;2004-04
2 WU Jian-jun(The Key Lab.of Contemporary Design and Integrated Manufacturing Technology,Ministry of Education,Northwestern Polytechnical University,Xian 710072,China);Rapid development and forming simulation for deep drawing parts of orthotropic sheet metal[J];Materials Science and Technology;2008-01
3 (Qin Siji), (YanYanhong), (The College of Mechanical Engineering, YanshanUniversity, Qinhuangdao 066004).;The Neutral Surfaces of Stress and Strain in Wide PlateBending Process[J];Journal of Yanshan University;2002-03
4 Mao Yunsheng 1) Hou Lei 2) Wang Chengfang 1) (School of Communications, WUT, Wuhan 430063) 1) (701 Institute of Navy, Wuhan 430064) 2);A Theoritical Study of Bended Plate Stretching[J];Journal of Wuhan University of Technology;2002-05
5 ;宽板弯曲过程中板厚的变化规律[J];Die and Mould Technology;2003-01
6 LI Yan hui, XIAO Xiang zhi, LI Jian jun;Blank Expanding of Stamping Part Based on Feature[J];Die and Mould Technology;2003-03
7 YE Xiao feng, LI Jian jun, XIAO Xiang zhi;Stamping Parts Unfolding System Development Based on UG[J];Die and Mould Technology;2004-01
8 Xu Guoyan(Beijing University of Aeronautics and Astronautics,Beijing,China) Shi Fazhong;Blank Calculation for Sheet Metal Forming of a Square Cup[J];China Mechanical Engineering;2003-09
9 Wu Jianjun Li Shunping Northwestern Polytechnic University,Xi'an,710072;Study on Two Blank Design Methods for Deep Drawing Part[J];China Mechanical Engineering;2004-13
10 Wu Jianjun Yang HanpingKey Lab.of Ministry of Contemporary Design and Integrated Manufacturing Technology,Northwestern Polytechnic University,Xi'an,710072;Study on the Spreading Method of Sheet Metal Parts Considering Outside Normal[J];China Mechanical Engineering;2006-15
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved