Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Electronics and Information Technology》 2003-01
Add to Favorite Get Latest Update

PID CONTROLLER FOR ACTIVE QUEUE MANAGEMENT

Ren Fengyuan Wang Fubao Ren Yong Shan Xiuming (Department of Electronic Engineering, Tsinghua University, Beijing 100084, China) (Dept. of Computer Sci. and Eng., Northwestern Polytechnical Univ., Xi'an 710072, China)  
Acting on the intermediate nodes, Active Queue Management (AQM) either keeps the high throughput for routers or effectively controls the queue lengths, so that arrives the object to control end-to-end delay for QoS guarantees. C. Hollot, et al. (2001) designed the PI controller for AQM with the frequency approach in classical control theory, but it seems to be unscientific to tune the controller parameters through trial-errors, moreover the transient performance of the PI controller is not perfect, such as the adjusting time is very long, etc. In this paper, the differential component is introduced to enhance the responsibility, and an approach for tuning controller parameters is put forward based on the explicit gain and phase margins. The simulation results show that the integrated performance of PID controller designed with the new approach is obviously superior to that of the PI controller.
【Fund】: 国家自然科学基金(No.69972040)
【CateGory Index】: TP393
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved