Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Chongqing University》 2009-06
Add to Favorite Get Latest Update

Numerical simulation of the internal dynamic excitation of a spiral bevel gear transmission

LIN Teng-jiao,YANG Yan-ni,LI Run-fang,LI Ying-chao (State Key Laboratory of Mechanical Transmission,Chongqing Univercity,Chongqing 400030,P.R.China)  
A 3-D geometry model and a static/dynamic finite element(FE) model of a spiral bevel gear transmission are established.Using ANSYS software,the mesh stiffness excitation of a tooth pair is calculated via the static contact FE method.Using LS-DYNA software,the approach position and relative velocity between the driving and driven gears are determined and used to analyze the impact excatation of the tooth pair.The error exaction is described by a half-sine function;the internal dynamic excitation of a spiral bevel gear transmission then can be obtained based on the acquired stiffness excitation,error exaction and impact exaction.The results indicate the following: the gear torque has a significant effect on impact characteristics,while the impact time is independent of the impact velocity;the impact force force is directly proportional to the impact velocity;the backlash and the error of crossed axes angle lead to the delay of the impact time and increase of the impact force;the backlash has considerable influence on lag time,while the error of crossed axes angle has noticeable influence on the impact force amplitude.
【Fund】: 国家科技支撑计划资助项目(2006BAF01B01-03);; 重庆市重大科技专项资助项目(CSTC 2007AB3030);; 重庆市重点科技攻关项目(CSTC 2006AA3010-6)
【CateGory Index】: TH132.41
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 8 Hits
1 HUANG Ze-ping1, MA Ji-sheng1, LI Wei1, LUO Ming-shan2 (1. Dept. of Guns Engineering, Ordnance Engineering College, Shijiazhuang 050003, China; 2. 73865 Unit, Yingtan 335004, China);Study on Gear Pair Meshing Impact Simulation[J];Ordnance Industry Automation;2006-10
2 YANG Hong-bin,GAO Jian-ping,DENG Xiao-zhong,ZHOU Yan-wei (Henan University of Science and Technology,Luoyang471003,China);Nonlinear Dynamics of Spiral Bevel Gears and Hypoid Gear Drives[J];Journal of Aerospace Power;2004-01
3 Xie Haidong, Zhou zhaoyao, Xiawei, Qiu Cheng, Zhang wen;Numerical Study on Meshing Impact of Helical Gear[J];Journal of Mechanical Transmission;2005-03
4 Ma Xuejie,Xie Gang,Wang Xiaolin;Dynamic Contact Emulate Analysis of Hypoid Gear with ANSYS/LS-DYNA[J];Journal of Mechanical Transmission;2005-06
5 SHENG Yun, WU Bao-lin(School of Mechanical and Electronics Engineering, Tianjin Polytechnic University, Tianjin 300160, China);Calculation analysis on meshing impact in gear transmission[J];Journal of Machine Design;2005-07
6 ZHOU Changjiang~1 TANG Jinyuan~2 ZHONG Zhihua~1 1.State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University,Changsha 410082; 2.School of Mechanical and Electrical Engineering,Central South University,Changsha 410075;Corner Contact and Impact Friction of Gear Drive[J];Chinese Journal of Mechanical Engineering;2008-03
7 TANG Jin-yuan1, LIU Xin1, DAI Jin1,2(1. School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China;2. Hunan University of Technology, Zhuzhou 412000, China);STUDY ON CORNER CONTACT SHOCK OF GEAR TRANSMISSION BY ANSYS/LS-DYNA SOFTWARE[J];Journal of Vibration and Shock;2007-09
8 LIN Teng-jiao, JIANG Ren-ke, LI Run-fang, LIU Wen(Slate Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China);NUMERICAL SIMULATION OF DYNAMIC RESPONSE AND SHOCK RESISTANCE OF MARINE GEARBOX[J];Journal of Vibration and Shock;2007-12
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIN Teng-jiao,JIANG Ren-ke,LI Run-fang,DU Xue-song(State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400030,P R China);Vibration Analysis and Noise Evaluation of Coaxial Planetary Gear Reducer with Dual Power Output[J];Journal of Chongqing University(Natural Science Edition);2007-11
2 ZHU Cai-chao,XU Xiang-yang,WANG Hai-xia,LU Bo(State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400030,P.R.China);Structural optimization of high-power marine gearbox[J];Journal of Chongqing University;2008-11
3 LIN Teng-jiao,LIAO Yong-jun,LI Run-fang,LIU Wen(State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400030,P.R.China);Numerical simulation of dynamic response and radiation noise of gearbox[J];Journal of Chongqing University;2009-08
4 BAI Hong-jin1,ZHANG Jin-mei1,YAO Jian-hao2(1.Jiaxing Vocational Technical College,Jiaxing Zhejiang 314036,China;2.Jiaxing Machinery Research Institute,Jiaxing Zhejiang 314001,China);Gear Noise Analysis and Noise Reduction Design[J];Equipment Manufacturing Technology;2010-01
5 DENG Xin-yuan,CAI Hao (Vehicle & Motorcycle Fittings Quality Supervision Control Center of Hunan Province, Changsha , Hunan 410013,China);Dynamic contact simulation analysis of the moving element in rotor lubricating pump[J];Hunan Agricultural Machinery;2009-01
6 CHEN Hongkou1,WEI Zhigang2(1.Nanjing College of Chemical Technology,Nanjing 210048,China;2.Southeast University,Nanjing 211189,China);Transient Analysis on the Engagement of Planet Gear Train[J];Machine Tool & Hydraulics;2008-04
7 WANG Yu-qing,ZHU Yun-pan(School of Mechanical Engineering,Henan Polytechnic University,Jiaozuo 454003,China);Image acquisition and pre-processing of spiral bevel gear contact spots[J];Journal of Henan Polytechnic University(Natural Science);2009-02
8 Dai Jin, Lu Yanfeng, Tang Jinyuan;Low Noise Gear Design based on a Genetic Algorithem[J];Journal of Mechanical Transmission;2007-06
9 Sun Jianguo, Lin Tengjiao, Li Runfang, Liu Wen;Dynamic Contact Finite Element Analysis of Involute Gears and the Influence of Modification[J];Journal of Mechanical Transmission;2008-02
10 ZHONG Cen-hong, ZHANG Yi-du (College of Mechanical Engineering and Automation, Beihang University, Beijing 100083, China);A Quasi-static Meshing Simulating Analysis for Spiral Bevel Gear[J];Mechanical Engineer;2008-01
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Li Zuozhang Wang Yanzhong Zhou Yunfei Zhou Ji College of Mech. Sci. & Eng., HUST, Wuhan 430074, China.;Getting Contacting Points of Bevel Gear Tooth Fitting Surfaces[J];JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY;2000-06
2 ZHOU Chang-jiang~1,TANG Jin-yuan~(1,2),WU Yun-xin~(1,2)(1.School of Mechanical and Electrical Engineering,Central South University,Changsha 410075,China;2.State key Laboratory of Mechanical Transmission,chongqing university,chongqing 400030,China);Load-hist Evaluation of Stresses and Deflection of Spur Gear Teeth Based on Exact Model[J];Machine Design and Research;2004-03
3 Li Runfang,et al.;Numerical Simulation for Inner Dynamic Excitation of Gearing[J];Journal of Mechanical Transmission;2001-02
4 Wang Xiaolin, Xie Gang, Ma Xuejie;CAD Program Development for Parameteric Design of Hypoid Gear[J];Journal of Mechanical Transmission;2005-04
5 WU Bao-lin1,YANG Su-jun1,YAO Jun-hong2 ( 1 Tianjin Polytechnic University,Tianjin 300160; 2 Dezhou Institute of Technology, Dezhou 253015);Theoretical Analysis on Meshing Impact of Involute Gears[J];Mechanical Science and Technology;2003-01
6 SHENG Yun, WU Bao-lin(School of Mechanical and Electronics Engineering, Tianjin Polytechnic University, Tianjin 300160, China);Calculation analysis on meshing impact in gear transmission[J];Journal of Machine Design;2005-07
7 Lin Tengjiao; Li Rnfang ;Tao Zeguang(Chongqing University);NUMERICAL SIMULATION OF 3-D GAP TYPE NONLINEAR DYNAMIC CONTACT-IMPACT CHARACTERISTICS FOR GEAR TRANSMISSION[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;2000-06
8 Wang Sanmin Shen Yunwen Dong Haijun (Northwestern Polytechnical University);NONLINEAR DYNAMICAL CHARACTERISTICS OF A SPIRAL BEVEL GEAR SYSTEM WITH BACKLASH AND TIME-VARYING STIFFNESS[J];Chinese Journal of Mechanical Engineering;2003-02
9 Sun Yuehai Zhang Ce Ge Nan (Tianjin University);TOOTH PROFILE MODIFICATION FOR SPUR GEARS WITH MANUFACTURING ERROR[J];Chinese Journal of Mechanical Engineering;2003-12
10 Long Hui; Zhang Guanghui;Ou Hengan(Chongqing University);COMPUTER SIMULATION OF LOAD AND STRESS OF SPUR GEARS IN MESHING PROCESS[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;1995-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved