Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials Science and Engineering of Powder Metallurgy》 2011-03
Add to Favorite Get Latest Update

Oxidation and cutting properties of TiN and TiAlN coated cemented carbide

XU Yin-chao1,CHEN Kang-hua1,WANG She-quan1,2,ZHU Chang-jun1,XIE Can-qiang1,CHEN Xiang-ming2(1.State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China;2.Zhuzhou Cemented Carbide Cutting Tools Co.Ltd,Zhuzhou 412007,China)  
The oxidation resistance of coated cemented carbides and the effect of which on cutting properties were studied.TiN and TiAlN coatings were deposited onto WC-8 %(Ti,Ta,Nb) C-6%Co cemented carbides by cathodic arc-evaporation.The micro-structure,morphology and micro-hardness of the coated cemented carbides were investigated using X-ray diffraction,scanning-electron microscopy and micro hardness testing system.The cutting test was performed at 160 m/min and 280 m/min.It is found that there are lots of oxides in the border of the TiN and TiiAlN coated cemented carbide after being oxidized two hours at 700 and 800 ℃.However,the border craze of TiAlN coated cemented carbide is later than that of TiN coated cemented carbide.Micro hardness of the TiN and TiAlN coated cemented carbide decreases as oxidation time increases.The cutting property of TiAlN is more obvious with the increase of the cutting speed,because of its better oxidation resistance.
【Fund】: 高档数控机床与基础制造装备科技重大专项(2009ZX04012-021);; 国家自然科学基金委员会创新研究群体科学基金资助项目(50721003)
【CateGory Index】: TG174.44
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 ZHONG Chun-liang,DONG Shi-run,YU Li-hua,XU Jun-hua(School of Materials Science and Engineering,Jiangsu University of Science and Technology,Zhenjiang 212003,China);The Study on Microstructure and Oxidation Resistance for Cr_(1-x)Al_xN Coating[J];Surface Technology;2007-06
2 WANG Xing-qing,LI Xiao-dong,GUO Hai-liang,HE Bao-shan(School of Materials Science and Engineering,Shanghai University,Shanghai 200072,China);Influence of Al content on properties of corrosion resistance of WC-Co cemented carbide[J];Materials Science and Engineering of Powder Metallurgy;2006-04
3 HU Zhi-jie1,2,YAN Peng2,LI Zheng-xian1,2,WANG Bao-yun2(1.School of Mechanical and Electrical Engineering,Shaanxi University of Science & Technology,Xi'an 710021,China;2.North-west Institute for Non-ferrous Metal Research,Xi'an 710016,China);MICROSTRUCTURE AND PROPERTIES OF THE TiAlN COATING ON Ti ALLOY BY ARC ION PLATING[J];Journal of Shaanxi University of Science & Technology(Natural Science Edition);2008-03
4 Hu Shubing 1, Mei Zhi 2, Li Zhizhang 3 and Zeng Yuewu 3 1 Department of Materials Engineering, Hubei Automobile Industries Institute, Shiyan 442002, P. R. China 2 School of Materials Science and Engineering, Huazhong University of Science and Tech;OXIDATION PROPERTIES OF TiN COATING BY ION PLATING AT HIGH TEMPERATURE[J];THE CHINESE JOURNAL OF NONFERROUS METALS;1999-S1
5 CHEN Li~(1,2),WU En-xi~1,YIN Fei~(1,2),WANG She-quan~(1,2),WANG Xiu-quan~1(1.State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China;2.Zhuzhou Cemented Carbide Cutting Tools Co.LTD.,Zhuzhou 412007,China);Microstructure and properties of (Ti,Al) N coating[J];The Chinese Journal of Nonferrous Metals;2006-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LI Jia XIA Changqing LIU Changbing DAI Xiaoyuan (School of Materials Science and Engineering, Central South University, Changsha 410083);Effect of Al Content on Crystalline Structure And Properties of (Ti,Al)N Coating[J];Materials Review;2003-12
2 ZENG Peng, HU She jun, XIE Guang rong, HUANG Na can, WU Qi bai(Guangdong University of Technology, Guangzhou 510643, China);Multi-element-layer Ti-W-N films deposited by ultiarc ion plating[J];Material Science and Technology;2000-03
3 HU She jun, ZENG Peng, XIE Guang rong, HUANG Na can, WU Qi bai (Guangdong University of Technology, Guangzhou\ 510643,China);Microstructure and Properties of Ti-Mo-N Tenary Multi-layer Films[J];MATERIALS SCIENCE AND ENGINEERING;2000-03
4 JIANG Yuan-yuan~(1,2),YI Dan-qing~(1,2),LI Jian~(1,2),ZHANG Lu-huai~(1,2),SU Hua~3,HUANG Liang~(1,2),PENG Zhen-wen~(1,2)(1.Department of Material Science and Engineering,Central South University,Changsha 410083,China;2.The Key Laboratory of Non-Ferrous Meta.Material Science and Engineering,Ministry of Education, Changsha 410083,China;3.Klt Carbide Co.,Ltd.,Guanghan 618306,China);Corrosion Characteristic of WC-9Ni-0.57Cr Cemented Carbide in Artifical Seawater Environment[J];Journal of Materials Science and Engineering;2008-05
5 Zheng Liyun~(1,2) Xiong Weihao~2 Wang Yuguo~3 Zhao Lixin~1 (1.Hebei University of Engineering,Handan 056038,China) (2.Huazhong University of Science and Technology,Wuhan 430074,China) (3.Tianjin University,Tianjin 300072,China);Microstructure and Properties of TiN/TiAlN Coating Ion-Plated on Cermets[J];Rare Metal Materials and Engineering;2007-S2
6 WANG She-quan1,2,CHEN Kang-hua1,XU Yin-chao1,ZHU Chang-jun1,XIE Can-qiang1,CHEN Xiang-ming2 (1.State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China;2.Zhuzhou Cemented Carbide Cutting Tools Co.Ltd,Zhuzhou 412000,China);Oxidation behavior of TiN coated cemented carbide in air[J];Materials Science and Engineering of Powder Metallurgy;2010-04
7 MA Li-li1,2 (1.China National R&D Center for Tungsten Technology,Xiamen Tungsten Co.Ltd.Technology Center, Xiamen 361009,China; 2.Xiamen Golden Egret Special Alloy Co.Ltd.,Xiamen 361006,China);Corrosion behavior of cemented carbide in water[J];Materials Science and Engineering of Powder Metallurgy;2010-06
8 FU Shu-ying,ZHONG Wei(Department of Solar Energy Science and Engineering Xinyu College,Xinyu Jiangxi 338031,China);Research Progresses on TiN Solar Spectroscopic Selective Absorbing Film[J];Heat Treatment Technology and Equipment;2009-01
9 Hu Shubing 1,2 , Li Zhizhang 2 , Mei Zhi 3 , Ye Xianyun 1 (1 Hubei Automobile Industrial Institute, Shiyan Hubei 442002;\ 2 Department of Material Science and Engineering, Zhejiang University, Hangzhou 310027;\ 3 State Key La;Adhesion Strength and Wear Behavior of Ion Plating TiN Composite Coating with Electric Brush Plating Ni W Interlayer[J];Transactions of Metal Heat Treatment;2000-04
10 DONG Song-tao,YU Li-hua,XUE An-jun,XU Jun-hua (Key Laboratory of Advanced Welding Technology,Institute of Material Science and Engineering,Jiangsu University of Science and Technology,Zhenjiang 212003,China);Microstructure and properties of TiAlN /CrAlN nanostructured multilayer films[J];Transactions of Materials and Heat Treatment;2010-08
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 GU Yan-hong1 , WANG Cheng-biao1 , LIU Jia-jun2 (1.School of engineering and technology, China University of Geosciences, Beijing 100083; 2.Tsinghua University, Beijing 100085);Tribological Properties and Preparation of (Ti,Al)N Coatings on High Speed Steel Substrate[J];China Surface Engineering;2004-05
2 LI Qin-hu,WANG Jun(School of Mechanical Engineering,Yangzhou University,Yangzhou 225009,China);Oxidation Resistance of Magnetron Reactive Sputtering CrN Films[J];Surface Technology;2005-06
3 RU Qiang, HU She-jun, HUANG Na-can ZHAO Ling-zhi, QIU Xiu-li, HU Xian-qi (1. School of Material and Energy. Guangdong University of Technology, Guangzhou 510006, China; 2. School of Physics & Telecommunication Engineering, South China Normal University, Guangzhou 510006. China; 3. Shenzhen Goldenhouse Vacuum TechnologyCo. Ltd., Shenzhen 518053, China).;Resislance to High-Temperature Oxidation of Are Ion PlatedTiAIN Coaling on Heat-Resisting Titanium Alloy[J];Materials Protection;2007-01
4 WANG Yong kang,LEI Ting quan,XIA Li fang (Harbin Institute of Technology,Harbin 150001,China) XIONG Ren zhang(Ningbo Surface Engineering Research Centre,Ningbo 315041,China);The Oxidation Resistant Behavior of Ti_(0.5) Al( 0.5) N Coating at Elevated Temperature[J];Journal of Materials Engineering;2001-01
5 WANG Yong kang 1, XIONG Ren zhang 1,2 , LEI Ting quan 2, XIA Li fang 2, LI Bing sheng 1 (1 Ningbo Surface Engineering Research Center, Ningbo 315041, China; 2 Harbin Institute of Technology, Harbin 150001, China );The Effect of Al Content on the Microstructure of Ti_ (1-X) Al_XN Coating[J];Journal of Materials Engineering;2002-08
6 LI Cheng-ming~1, SUN Xiao-jun~2, ZHANG Zeng-yi~3, TANG Wei-zhong~1, LU Fan-xiu~1 (1. School of Material Science and Engineering, University of Science and Technology Beijing, Beijing,100083, China, Institute of Chemical physics, Chinese Academy of Sciences, Lanzhou 730000 China; 3. Hebei Mechanical & Electronic Equipment Tendering Corporations, Shijiazhuang, 050051,China);The experimental analysis of suppressing macroparticles in films by filtering arc[J];Material Science and Technology;2004-03
7 Wang Yukui;Li Xiulan;Wang Xiumin; Gao Lusi; Liao Yongquan; Han Huimin(Dept.of Materials Engineering,DUT);Study of technology of coatings consisting of Ti_2N and TiN deposited by plasma enhanced magnetron sputter ion plating[J];Journal of Dalian University of Technology;1996-01
8 Song Jiebing, Li Xuefei, Liu Guijin, Zhang Chunyan;Coatting hard alloy cutting's application in the cutting[J];Electro-optics & Passive Countermeasures;2002-03
9 Li Wenmei (College of Engineering, Yangzhou University, Yangzhou Jiangsu 225009, PRC)He Jiaweu (Xi'an Jiaotong University,Xi'an Shanxi 710049,PRC);Oxidation Resistant Properties of Vapor Deposited TiN、Ti(C, N)Coatings[J];MATERIALS FOR MECHANICAL ENGINEERING;1997-04
10 WU Xiao-mei,LI Wei-guang,LU Feng Beijing Institute of Aeronautical Material,Beijing 100095,China;Research of Protective Coating to the Titanium Alloy Blade[J];Equipment Environmental Engineering;2006-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved