Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Powder Metallurgy Technology》 1993-03
Add to Favorite Get Latest Update

TiC-Ni AND TiC-Ni-Mo HARD ALLOYS PRODUCED BY SHS

Yin Sheng, Tang Qing, Miao Suxia and Lai Heyi(University of Science and Technology Beijing, Beijing 100083)  
TiC-Ni and TiC-Ni-Mo hard alloys were produced by SHS processing. In Ti-C-Ni system, molten Ti-Ni was formed, C dissolved into the melt and then TiC precipitated. Dense TiC-Ni alloy was formed by liquid phase sintering under pressure. Ni content influences the grain size and morphology of TiC. Mo additive decreases the grain size of TiC. The mechanical properties of TiC-Ni and TiC-Ni-Mo can be compared to those of conventional alloys having nearly similar composition.
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 5 Hits
1 Zhang Xinghong;He Xiaodong;Chen Guiqing;Han Jiecai and Du Shanyi(Center for Composite Materials,Harbin Institute of Technology, Harbin, 150001);RESEARCH ON TiC-Ni CERMETS BY SHS AND PSEUDO HEAT ISOSTATIC PRESSING[J];POWDER METALLURGY TECHNOLOGY;1999-01
2 Zhang Xinghong He Xiaodong Han Jiecai Qu Wei Du Shanyi (Center for Composite Materials, Harbin Institute of Technology, Harbin 150001);INFLUENCE OF Ni CONTENT ON TiC Ni CERMETS BY SHS/PHIP[J];ACTA MATERIAE COMPOSITAE SINICA;1999-04
3 Zhang Shouquan1),2),Wang Haitao1),Huang Jihua1),Zhu Jinglei1),Zhang Qiang1),Liu Huiyuan1) 1)(School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China) 2)(Xiamen Golden Egret Special Alloy Company Limited,Xiamen Fujian 361006,China);TiC reinforced cermet coatings prepared by reactive flame spraying of powders via carbonization of precursor[J];Powder Metallurgy Technology;2009-06
4 LIU Hui-yuan~1,HUANG Ji-hua~(1,3),WEI Shi-zhong~2,ZHANG Hua~1,ZHAO Xing-ke~1(1.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;2.Henan Engineering Research Center for Wear of Material,Luoyang 471003,China;3.National Key Laboratoryof Advanced Welding Production Technology,Harbin Institute of Technology,Harbin 150001,China);Ceramet Composite Coating Synthesized and Deposited from Ti-Ni-C System Composite Powder for Reactive Flame Spray[J];Journal of Aeronautical Materials;2007-01
5 Wang Shuangxi Wang Jianjiang Li Junshou Zhang Long(Institute of Ordnance Engineering, Shijiazhuang, Hebei, 050003);SHS Technology Application in Manufacturing of Metal-ceramic Composite[J];MACHINE DESIGN AND MANUFACTURING ENGINEERING;1999-03
【Citations】
Chinese Journal Full-text Database 1 Hits
1 Yin Sheng ,Lai Heyi (University of Science and Technology Beijing, Belling 100083);DEVELOPMENTS IN SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS(SHS)[J];Powder Metallurgy Technology;1992-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Tang Qing Yin Sheng Yu Zhigang Lai Heyi Department of Materials Science and Engineering;A Study of SHS - Pressing Process of Ti-C-Ni-Mo System[J];Journal of University of Science and Technology Beijing;1993-06
2 JIN Hua feng (Departement of Chemistry , Ankang Teacher's College ,Shanxi Ankang 725000,China);Research for Application and Developing Trend of Combustion Synthesis Ceramic Coating Technology[J];Surface Technology;2000-06
3 LI Wen-ge et al (Dept. of Materials Science and Engineering, Tsinghua Univ., Beijing, Peop. Rep. China 100084);Present Status and Development of Combustion Synthesizing of Ceramic Coating[J];Materiais Protection;2001-01
4 LI Zu-de~1,LI Song-lin~2,ZHAO Mu-yue~2(1.Beijing Powder Metallurgy Research Institute,Beijing 100078,China; 2.State Key Laboratory of Powder Metallurgy,Central South University, Changsha 410083,China);New P/M technologies and materials developed in late-20th century:(1)——Review of new techniques development[J];Materials Science and Engineering of Powder Metallurgy;2006-05
5 Zhu Xinkun, Zhao Kunyu, Su Yuneng ,and Gao Tao (Kunming Institute of Technology, Kunming 650093);SELF-PROPAGATING HIGH TEMPERATURE SYNTHESIS OF Al_2O_3+ZrO_2 +Cr COMPOSITE[J];POWDER METALLURGY TECHNOLOGY;1994-03
6 Zhao Zhongmin;Wang Jianjiang;Ye Minghui;Zhang Long;Li Junshou;Wang Shuangxi(Ordnance Engineering College Shijiazhuang Hebei 050003 PRC);Structure and Properties of the Ceramic-Lined Pipes Produced by SHS Gravitational Separation-Thermit Process[J];MATERIALS FOR MECHANICAL ENGINEERING;1998-02
7 Cui Hongzhi; Li Huiqi; Bi Yong (Shangdong Institute of Mining and Technology,Taian Shangdong 271019,PRC);Application and Investigation of Self-Propagating High-Temperature Synthesis in Surface Matallurgic Strengthening[J];MATERIALS FOR MECHANICAL ENGINEERING;1996-04
8 CHEN Sen-chang(Dept.of Material Engineering,Hubei Automotive Industries Institute,Shiyan 442002, China);Research Situation of Self-Propagating High - Temperature Synthesis[J];Journal of Hubei Automotive Industries Institute;2002-01
9 Yin Sheng(University of Science and Technology Beijing)Luo Zhenbi(Qinghua University);INVESTIGATION ON CUBIC BORON NITRIDE CUTTING TOOL MADE FROM HIGH PRESSURE COMBUSTION SYNTHESIS[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;1994-04
10 LI Qiang, YU Ying-yuan, MU Bai-chun (Material & Chemical Engineering Dept. of Liaoning Institute of Technology, Jinz hou 121001, China);A Brief Introduction to Self-propagation in High Temperature Synthesis (SHS) Technique[J];Journal of Liaoning Institute of Technology;2001-05
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 YAO Hai-yu,WANG Yin-zhen,WANG Hai-fang,WANG Wei(College of Mechanical and Electronic Engineering,University of Petroleum,Dongying 257061,China);Sliding wear properties of reactive high velocity oxy-fuel flame spraying TiC-Ni coatings[J];Ordnance Material Science and Engineering;2006-02
2 Guo Shiju(Postdoctor,Powder Metallurgical Teaching & Research Section, University of Science Technology Beijng,100083);Lai Heyi;SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS OF INTERMETALLICS[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1994-01
3 Wang Yongkang(P,O.Box 303,Ninbo 315040);Wang Weimin;Xia Lifang;et al;EROSION RESISTANCE GRADIENT COATING[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1994-04
4 CHEN Ji min,ZUO Tie chuan (National Center of Laser Technology,Beijing University of Technology,Beijing 100022,China);Microfabrication of micron metallic powder with laser sintering[J];Micronanoelectronic Technology;2003-Z1
5 Yin Sheng Miao Suxia Liao Xiangwei Lai Hoyi Wang Run Department of Materials Science and Engineering;Preparation of TiC / Ni Functionally Gradient Materials by SHS-Pressing[J];Journal of University of Science and Technology Beijing;1993-01
6 ZHOUZhangjian; GE Changchun; ; LIJiangtao (Laboratory of Special Ceramic & P/M, UST Beijing, Beijing 100083,China LU Guanwei Beijing institute of Aeronautical technology, Beijing 100024,China);Fabrication and Evaluation of B,C/Cu Graded Coating by Plasma Spray[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;2000-02
7 XI Mingzhe, ZHANG Yongzhong, SHI Likai, CHENG Jin1) Material Science and Engineering School, UST Beijing, Beijing 100083, China2) General Research Institute for Nonferrous Metals, Beijing 100088, China;Investigation on the Fully Dense Metal Part by Laser Rapid Prototyping[J];Journal of University of Science and Technology Beijing;2002-04
8 Wang Lu; Wang Fuchi; Lu Guangshu; Zhang Lihua; Fan Tianyou(School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing 100081);Residual Thermal Stress for the Interface in ZrO2-NiCrAl Functionally Gradient Thermal Barrier Coatings[J];JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY;1998-05
9 ZHOU Jing 1, WEI yun-long 1, ZHANG long-ping 2,WU hu-lin 2 (1.Chongqing University Chongqing 400044,China; 2.No. 59 Institute China Ordnance Industry of Chongqing 400039,China);The Development of Wear Resistant Coating and TBC by Plasma Spaying Process[J];Surface Technology;2001-02
10 LIU Chang song, YIN Sheng(83);Advance in Reactive Thermal Spraying[J];MATERIAIS PROTECTION;2000-01
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 WANG Wei, WANG Yin-zhen, WANG Hai-fang, YAO Hai-yu (College of Mechanical and Electronic Engineering in China University of Petroleum, Dongying Shandong 257061);Effect of MoS2 Content on Microstructures and Performances of the Self-Lubricant Coating[J];China Surface Engineering;2006-02
2 ZHANG Yong1,ZHAO Hong2,ZHANG Xing-hong1,Ren Nan-qi1 (1.Harbin Institute & Technology,Harbin,150001 China;2.Qiqihar University,Qiqihar 161006,China );Investigation of Wear-Resistant Property of TiC/Fe Ceramic Coating Produced by Self-Propagating High-Temperature Synthesis[J];China Surface Engineering;2007-01
3 SHI Jianwen, WANG Yinzhen, LI Xiaolong (Department of Materials Science and Engineering, College of Mechanical and Electronic Engineering, University of Petroleum (East China), Dongying 257061, China).;Structures and Properties of (Ti, Mo) C-Ni Coatings by High Velocity Oxy Fuel Spraying[J];Materials Protection;2005-05
4 WANG Hai-fang,WANG Yin-zhen,YAO Hai-yu,WANG Wei(College of Mechanical and Electronic Engineering in the University of Petroleum, Dongying 257061,China);Influence of Ni on the Microstructure and Wear Resistance of TiC-Ni Coatings Prepared by Reactive High Velocity Oxy Fuel Flame Spraying[J];Materials Protection;2006-02
5 LI Wenxian ZHANG Gang LAI Yanqing TIAN Zhongliang QIN Qingwei ( School of Materials Science and Engineering, Central South University, Changsha Hunan 410083; School of Metallurgy Science and Engineering, Central South University, Changsha Hunan 410083);Functionally Gradient Materials: Current Status and Future Directions[J];Materials Review;2003-S1
6 ZHANG Xing hong, HE Xiao dong, WANG Hua bin, HAN Jie cai(Center for Composite Materials, Harbin Institute of Technology, Harbin 150001, China);Thermal physical properties of TiC-xNi cermets produced by combustion synthesis[J];Material Science and Technology;2000-04
7 XU Qiang, ZHANG Xing hong, HE Xiao dong, HAN Jie cai(Center for Composite Materials, Harbin Institute of Technology, Harbin 150001, China);Self-propagating high-temperature synthesis of TiB/Ti composites[J];Material Science and Technology;2001-04
8 XU Qiang, ZHANG Xinghong, HAN Jiecai, HE Xiaodong(Center for Composite Materials, Harbin Institute of Technology, Harbin 150001);Influence of calculated purity of boron powder on TiB_2-Cu composites[J];Material Science and Technology;2003-03
9 YAO Hai-yu,WANG Yin-zhen,WANG Hai-fang,WANG Wei (College of Mechanical and Electronic Engineering,University of Petroleum,Dongying 257061,China);Influence of Ni on the Microstructure and Wear Resistant Properties of Reactive High Velocity Oxy-fuel Flame Spraying TiC/Ni Coatings[J];Development and Application of Materials;2005-05
10 LIU Changlei LI Shu~* LIU Yang LIU Yue (Institute of Metal Research.Chinese Academy of Sciences,Shenyang 110016);Wear behaviors of titanium carbide reinforced composites under different conditions[J];Chinese Journal of Materials Research;2007-06
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved