Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Powder Metallurgy Technology》 2004-02
Add to Favorite Get Latest Update

Study of process of fine-grained W-Cu composites

Fan Jinglian,Liu Jun,Yan Dejian,Huang Baiyun (State Key Laboratory for Powder Metallargy,Contral South University,Changsha 410083,China)  
Elemental W-20%Cu powder mixtures were mechanically alloyed in a planetarg high ball milling. After a certain time of high-energy ball milling, nanostructured W-Cu composite powder was obtained where W crystalline size about 30nm. Crystalline sizes of milled powder were analyzed by means of XRD. Meanwhile the powder characterization such as particle size, distribution, apparent density and tap density of MA-ed powder were examined. The green part from the nanostructured powder was then sintered at 1200~1300 ℃ . The relative density of the sample is higher than 99.5%, tensile strength is higher than 780MPa, elongation of the samples higher than 3.5% and tungsten grain is about 1~2μm.
【Fund】: 湖南省科学技术重点基金项目 (0 1JZY2 0 5 7)
【CateGory Index】: TB331
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 LI Huiqian, LIN Tao, GUO Zhimeng, WU Chengyi, LUO JiSchool of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083;Sintering process of nanoscale tungsten powder[J];Journal of University of Science and Technology Beijing;2008-03
2 CHEN Qiang1,LIU Rui1,TAN Dun-qiang1,LI Wen-xian2(1.School of Material Science and Engineering,Nanchang University,Nanchang 330031,China;2.School of Materials Science and Engineering,Central South University,Changsha 410083,China);Study on Processes of Aluminum Electro-deposition on Tungsten-copper Foil[J];Surface Technology;2011-02
3 WANG Zhan-lei,LI Xiao-jie,ZHANG Cheng-jiao, YI Cai-hong,WANG Hai-tao,SUN Wei(Department of Engineering Mechanics,Dalian University of Technology, Dalian 116024,Liaoning,China);Explosive consolidation of W-Cu alloy as liner materials and its performance[J];Explosion and Shock Waves;2011-03
4 Liu Binbin, Lu Yannan, Xie Jianxin (State Key Laboratory of Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China);Compact and Mechanical Properties of W-Cu Gradient Heat-Sink Materials[J];Rare Metal Materials and Engineering;2008-04
5 LUO Han,LUAN Dao-cheng,WANG Zheng-yun,WANG Lei(College of Materials Science and Engineer,Xihua University,Chengdu Sichuan 610039,China);INFLUENCE OF HIGH POWER BALL MILL TECHNOLOGY ON STRUCTURE OF TUNGSTEN-COPPER COMPOSITES[J];Powder Metallurgy Industry;2007-01
6 TAN Dun-qiang,YANG Xiao-xia,LIU Bing-fa (School of materials science and engineering,Nanchang university,Nanchang Jiangxi 330031,China);STUDY ON COMPACT FORMING OF W-Cu NANO-COMPOSITE POWDER[J];Powder Metallurgy Industry;2010-03
7 CHEN Qiang1,TAN Dun-qing1,YU Fang-xin1,LI Wen-xian2(1.School of Material Science and Engineering,Nanchang University,Nan Chang 330031,China;2.School of Materials Science and Engineering,Central South University,Changsha 410083,China);STUDY ON IMPROVING THE SURFACE QUALITY OF W-Cu LED THERMAL SUBSTRATE[J];Powder Metallurgy Industry;2010-06
8 Tan Dunqiang1),Xiao Dongfei1),Liu Bingfa1),Zhou Lang1),Zhang Quanxiao2),Yang Runtian2),Chen Wei2) 1)(School of Materials Science and Engineering,Nan Chang University,Nanchang 330047,China) 2)(Ningbo Branch of China Ordnance Science,Ningbo Zhejiang 315103,China);Research into preparation of composite W-Cu oxide nanopowder[J];Powder Metallurgy Technology;2007-06
9 Chen Mianzhi1),Chen Wenge1),2),Dai Guangqian1)1)(School of Material Science and Engineering,Xi'an University of Technology,Xi'an 710048,China)2)(School of Material Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China);Influence of rare earth and its oxide on properties of W-Cu alloy[J];Powder Metallurgy Technology;2008-06
10 Liu Tao,Fan Jinglian,Tian Jiamin,Cheng Huichao (State Key Laboratory for Powder Metallurgy,Central South University,Changsha 410083,China);Phase transformation during calcining and reducing of spray-dried W-Cu precursor powder[J];Powder Metallurgy Technology;2010-02
China Proceedings of conference Full-text Database 1 Hits
1 WANG Feng-tao WU Yu-cheng WANG Tu-gen REN Rong (School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);Effects of mechanical alloying on microstructure and properties of W-20Cu composites[A];[C];2007
【Citations】
Chinese Journal Full-text Database 2 Hits
1 Cai Yixiang; Liu Bowu(Guangzhou Institute of Non-ferrous Metals, Guangzhou 510651);PORBLEMS & SOLUTIONS IN DENSIFICATION OF W-Cu COMPOSITE[J];POWDER METALLURGY TECHNOLOGY;1999-02
2 Li Yunping Qu Xianhui Duan Behua (State key laboratory for powder metallurgy,changsha,410083,china);THE NEW DEVELOPMENTS OF TUNGSTEN-COPPER(MOLYBDENUM-COPPER) COMPOSITE[J];Cemented Carbide;2001-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZOU Zheng-jun(Hefei Railway Engineering School,Hefei Anhui 230011,China);Properties and Process of Electroless Plating Copper on Super-fine Tungsten Particles[J];Anhui Chemical Industry;2007-04
2 CHEN Wenge,HU Kewen,SHI Nailiang(School of Materials Science and Engineering,Xi′an University of Technology,Xi′an 710048,China);Fabrication and characteristic of the tungsten powder coated by copper[J];Ordnance Material Science and Engineering;2010-03
3 XU JinLong;ZHANG Liying;LIN Tao;WU Chengyi Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Preparation of Nanoscaled WO_3-CuO Composite Powders[J];Journal of University of Science and Technology Beijing;2004-03
4 ZHAO Fang, LIN Tao, ZHANG Liying, WU Chengyi Materials Science and Engineering School, Universities of Science and Technology Beijing, Beijing 100083, China;Sintering and mechanical properties of nanoscaled W-40%Cu alloys[J];Journal of University of Science and Technology Beijing;2005-05
5 HAN Sheng-li,SONG Yue-qing,CUI ShunPowder Metallurgy and Special Materials Research Department,General Research Institute for Nonferrous Metals,Beijing 100088,China;Deformed microstructure of Mo-30Cu alloy at room temperature[J];Journal of University of Science and Technology Beijing;2009-03
6 WANG Guang-jun,WANG De-zhi,WU Zhuang-zhi,WANG Yi(School of Materials Science and Technology,Central South University,Changsha 410083,China);Electroless Copper Plating on Molybdenum Powder Surface[J];Materials Protection;2008-05
7 SHI Nailiang, CHEN Wenge(School of Materials Science and Engineering,Xi’an University of Technology, Xi’an 710048);Characteristics ,Preparation and Research Advance of W-Cu Composite Material for Electronic Packaging[J];Materials Review;2007-S1
8 LI Liang,SHEN Chunying,QIU Tai (College of Materials Science and Engineering,Nanjing University of Technology,Nanjing 210009);Research Progress in Microwave Dielectric Ceramics with Low Permittivity[J];Materials Review;2008-S1
9 XUE Xiang~1,LI Song~2,QIU Ruliang~2,LEI Xuxu~3,ZHANG Meng~1,TANG Jianchen~1 (1 School of Materials Science and Engineering,Nanchang University,Nanchang 330031;2 Fushan Branch of Special Equipments Supervising Bureau in Guangdong Province,Fushan 528000;3 Qiyang Bureau of Hunan Electric Power Company,Qiyang 426100);Research Progress in W-Cu Matrix Composites[J];Materials Review;2008-S1
10 LIU Jinglei, LIU Zuyan, WANG Erde (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China,E-mail:lgy@hope.hit.edu.cn);Densification of Cu-15wt%Cr composite powders prepared by mechanical milling[J];Material Science and Technology;2003-02
China Proceedings of conference Full-text Database 5 Hits
1 Jia Chengchang, Hou Changheng, Fan Shimin, Zhao jun, Xie Zizhang (School of Materials Science and Engineering, USTB, 100083, Beijing);PREPARING W-Cu COMPOSITES FROM fflGH ENERGY BALL MILLED POWDER[A];[C];2000
2 LIU Hai-yan, LI Zeng-feng, TANG Hui-ping, GAO Guang-rui, HUANG Yuan-ping (Northwest Institute for Non-ferrous Metal Research, Xi'an 710016, China);Mo-Cu composite material prepared by mechanical alloy[A];[C];2004
3 Chen Guoqin Jiang Longtao Zhu Dezhi Wu Gaohui (Center for MMCs Engineering and Technology, Harbin Institute of Technology, Harbin, 150001);Fabrication and Mechanical Properties of High Densification Mo/Cu Composites[A];[C];2004
4 Lu Da-ming(Central Iron & Steel Research Institute , Advanced Technology and Materials Co.,Ltd, Beijing 100081, China);Production, Application and Development of Tungsten-copper Composites[A];[C];2004
5 XIU Zi-yang, WU Gao-hui, SONG Mei-hui, ZHU De-zhi (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China);Thermophysical properties of Si_p/Al environment protection composites[A];[C];2005
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Yang Sen,Huang Weidong,Liu Xin,Zhou Yaohe;RECENT DEVELOPMENT OF DIRECTIONAL SOLIDIFICATION TECHNOLOGY[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;2000-02
2 Zhang Quanxiao,Gao Yun,Jia Wanming,Chen Jisen;STUDY OF MECHANICALLY ALLOYED Cu W SHAPEDCHARGE LINER MATERIALS[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;2000-03
3 Luo Shoujing,Li Jinping, Niu Wei , Hu Weiye, Gong Zhaohui P.O.Box 303,Ningbo 315041.;STUDY ON EXPOLSIVE COMPACTING TECHNOLOGY OF CuCr ALLOY[J];Ordnance Material Science and Engineering;2001-03
4 LIU De - bao, GUI Chun - xiang, MA Xu ( Institute of Material, Hebei University of Technology, Tianjin 300293, China; Institute of Material, Tianjin University of Technology, Tianjin 300191, China);Surface coating copper on AlN particle and AlN particle - reinforced copper matrix composites[J];Ordnance Material Science and Engineering;2005-02
5 ZHANG Quan-xiao, ZHANG Xin-ming, JIA Wan-ming,SHI Li-jun (Materials Science and Engineering College,Central South University, Changsha 410083, China; Ningbo Branch of China Academy of Ordnance Science, Ningbo 315103, China);Study on textures of the precision copper shaped charge material with high properties[J];Ordnance Material Science and Engineering;2005-04
6 WANG Tie-jun,XIONG Ning,QIN Si-gui,LIU Guo-hui(Antai Science and Technology Limited Company,Beijing 100081,China);Research on TiC/Cu cermet composites[J];Ordnance Material Science and Engineering;2006-05
7 ZHAO Teng,LUO Hong,JIA Wan-ming ,MA Shao-hua (Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China);Influencing factors analysis of the application performance of shaped liner material[J];Ordnance Material Science and Engineering;2007-05
8 HUANG Dan1,XIONG Jian2,GUO Yi-mu3 (1. Department of Engineering Mechanics, Hehai University, Nanjing 210098, China;2. Changli Steel Limited Company, Nanchang 330012, China;3. Department of Mechanics, Zhejiang University, Hangzhou 310027, China);Study on failure of nanoscale BCC and FCC monocrystalline bulks subjected to tension and shearing[J];Ordnance Material Science and Engineering;2008-03
9 Li Guobin (P O Box 4, Baotou 014034);RESEARCH DEVELOPMENT OF COMPOSITE LINERS OF SHAPED CHARGE[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1995-01
10 Wang Yaping, Zhao Feng, Ding Bingjun, Zhou Jingen;PREPARATION AND PROPERTIES OF CuCr CONTACT MATERIALS WITH NANOMETER GRAINS[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1998-03
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 SHEN Haining1,2,LIU Ruiying1,LIU Yong1,HUANG Wei1,WU Caijun2,CHEN Min1(1.Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China; 2.Ningbo Yuan-da-cheng-li Technology Limited Company,Ningbo 315000,China);Anti-corrosion property of nickle coating of special-shaped W-Ni-Cu part[J];Ordnance Material Science and Engineering;2011-05
2 SHI Nailiang, CHEN Wenge(School of Materials Science and Engineering,Xi’an University of Technology, Xi’an 710048);Characteristics ,Preparation and Research Advance of W-Cu Composite Material for Electronic Packaging[J];Materials Review;2007-S1
3 XUE Xiang~1,LI Song~2,QIU Ruliang~2,LEI Xuxu~3,ZHANG Meng~1,TANG Jianchen~1 (1 School of Materials Science and Engineering,Nanchang University,Nanchang 330031;2 Fushan Branch of Special Equipments Supervising Bureau in Guangdong Province,Fushan 528000;3 Qiyang Bureau of Hunan Electric Power Company,Qiyang 426100);Research Progress in W-Cu Matrix Composites[J];Materials Review;2008-S1
4 LIU Manmen,LIU Jie,XIE Ming,YANG Youcai,CHEN Yongtai,CUI Hao,ZHANG Jiming,CHEN Hongyan (Kunming Institute of Precious Metals,Kunming 650106);Research Progress of Metal Injection Molding in Copper-based Materials[J];Materials Review;2011-07
5 GUO Shi-bo,KANG Qi-ping,CAI Chun-bo(College of Electromechanical Engineering,Hunan University of Science and Technology,Xiangtan 411201,China);Effects of Activating Element Co on Microstructure and Properties of Mo-Cu Alloy[J];Journal of Materials Science and Engineering;2011-01
6 Li Xiankuan1,2,Chen Li1,2,3,Cai Hongzhong1,2,Wei Qiaoling1,2,Hu Changyi1,2,3 (1.Kunming Institute of Precious Metals,Kunming 650106,China) (2.Yunnan Key Lab of Precious Metallic Materials,Kunming 650106,China) (3.Kunming University of Science and Technology,Kunming 650093,China);Development of Chemical Vapor Deposition and Refractory Metal Materials[J];Rare Metal Materials and Engineering;2010-S1
7 Zhao Ming,Wang Jinshu,Liu Wei,Zhou Meiling(Key Laboratory of Advanced Functional Materials,Ministry of Education,Beijing University of Technology,Beijing 100124,China);Preparation of WCu Composite Powders by Sol-Gel Method and Their Reduction Behavior[J];Rare Metal Materials and Engineering;2011-02
8 GAO Jiacheng~(1**) WU Shufang~1 YANG Xiaodong~2 CHANG Xin~2 1.College of Material Science and Engineering,Chongqing University,Chongqing 400045 2.Yibin Nuclear Fuel Company,Yibin 644000;Effect of Pre-oxidation Powders on Sintering Properties of Uranium Dioxide Pellets[J];Chinese Journal of Materials Research;2012-03
9 KE Si-xuan, FENG Ke-qin, YANG Yi, WU Jin-ling, WEN Min (School of Manufacturing Science and Engineering, Sichuan University, Chengdu 610065, China);Effect of metal elements on rapid sintering W-Cu alloy under the action of electric field[J];Electronic Components and Materials;2008-10
10 WU Hua-bo, WANG Zhi-fa, LIU Jin-wen, RUAN Tao (School of Materials Science and Engineering, Central South University, Changsha 410083, China);Research of wet hydrogen sintering of W-skeleton[J];Materials Science and Engineering of Powder Metallurgy;2008-06
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 Zhang Quanxiao,Gao Yun,Jia Wanming,Chen Jisen;STUDY OF MECHANICALLY ALLOYED Cu W SHAPEDCHARGE LINER MATERIALS[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;2000-03
2 Jiang Guosheng Wang Zhifa Liu Zhengchun (Department of Materials Science and Engineering, Central South University d Technology, Changsha, 410083, China);THE STATUS OF THE STUDY ON W-Cu COMPOSITES WITH HIGH CONTENT OF TUNGSTEN[J];Materials Science and Engineering of Powder Metallargy;1999-01
3 Lu Daming (Central Iron & Steel Research Institute,100081 Beijing);TUNGSTEN COPPER MATERIALS USED IN VACUUM SWITCHES AND ELECTRONICS[J];POWDER METALLURGY INDUSTRY;1998-06
4 Tang Anqing Lü Darning (Central Iron and Steel Research Institute, Beijing 100081,China);DIFFUSION BONDING OF W-Cu TO Cu AND CuCr_(0.7) BY HIP PROCESSING[J];Powder Metallurgy Technology;1993-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved