Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《POWDER METALLURGY TECHNOLOGY》 1996-01
Add to Favorite Get Latest Update

MECHANICAL ALLOYING PROCESS DURING HIGH ENERGY BALL MILLING

Zhang Tongjun; Yang Junyou; Zhou Zhuohua;Zhang Jie and Cui Kun(Huazhong University of Science and Technology,Wuhan 430074 )  
It was studied that the mechanical alloying process of Fe and Ni powders under the protection of argon atmosphere. XRD and SEM were used to study the microstructure of powder during ballmilling process and the microhardness of powder for different ball milling times was measured. The results showed that complete alloying would be achieved after ball millins for 3 hours. The structure ofalloy was two-phases mixed structure of nanocrystulline supersaturated α solid solution(bcc)and γ solidsolution (fcc). After futher ball milling, the supersaturated a phase will be decomposed and transformed into γ phase gradually. The influence of micro-strain and grain size on the microhardness ofpowder during ball milling process has been analysized according to XRD patterns.
【Fund】: 湖北省自然科学基金
【CateGory Index】: TF123.111
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 Sun Jinfeng,Li Xiaopu,Wang Mingzhi,Zhao Yucheng (Key Laboratory of Metastable Materials Science & Technology,Yanshan University,Qinhuangdao Hebei 066004,China);Mechanical alloying of Fe-Cu powder and microstructure of solid phase sintered body[J];粉末冶金技术;2008-05
2 Wang Debao1,Wu Yucheng1,Wang Wenfang1,Zong Yue2 (1.School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China;2.Composites Company,Hefei University of Technology,Hefei 230009,China);Extension Solid Solubility of Immiscible Cu-Cr Alloy System Induced by Mechanical Alloying[J];稀有金属;2008-01
3 ZHANG Yajing CHEN Suiyuan CHENG Lizhi LIU Changsheng (Department of Mechanical Engineering, Northeastern University, Shenyang 110004) Supported by National Natural Science Foundation of China No.59871013. Manuscript received July 30, 2002; in revised form February 18, 2003. To whom correspondence should be addressed, Tel:(024)83682222,;Phase compositions of mechanically alloyed Fe-Ni alloys[J];材料研究学报;2003-03
4 Lin Wensong(Department of Mechanical and Electronic Engineering, Guangzhou 510640);Metallic Phase Transformation in Mechanical Alloying[J];粉末冶金技术;2001-03
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 ZHU Jian-juan, TIAN Bao-hong, LIU Ping (School of Materials Science and Engineering, He′nan University of Science and Technology, Luoyang 471003, He′nan , China);Development of Manufacture Technology for Cu-Cr Contact Materials[J];铸造;2006-11
2 Cui Lan 1, Ji Xiaona 1*, Chen Xiaoping 1, Ding Li 2 (1. Analysis Center of Tianjin University, Tianjin 300072, China; 2. The 46th Research Institute of Scientific and Technological Group Company of Chinese Electron, Tianjin 300072, China);Research and Development of Pure Copper Wires and Copper-Based Materials with High Strength and High Conductivity[J];稀有金属;2004-05
3 Wang Erde, Liu Jinglei, Liu Zuyan (School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001);The Research Progression on the Kinetics of Extension Solid Solubility Induced by Mechanical Alloying[J];粉末冶金技术;2002-02
4 CUI Xiao long, QI Min, WANG Lai ( Dept. of Mater. Eng., Dalian Univ. of Technol., Dalian 116024, China );Control of oxidation and formation of non-equilibrium phase in Cu-Cr alloys during MA[J];大连理工大学学报;2001-02
5 TANG Shaolong;WU Changheng;JIN Ximei;WANG Bowen;ZHUANG Yuzhi ( Department of Mechanical Engineering, Xiangtan University, Xiangtan 411105 Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110015) Correspondent: TANG Shaolong, associ;PHASE TRANSFORMATION IN ANNEALED MECHANICAL ALLOYING Nd-11Fe-Ti ALLOY AND ANNEALED MECHANICAL MILLING NdFe(11)Ti COMPOUND[J];金属学报;2000-01
6 Zhu Xinkun;Lin Qiushi;Chen Tieli;Cheng Baochang;Cao Jianchun(Kunming University of Science and Technology, Department of Materials Science and Engineering, Kunming 650093);RESEARCH AND PROGRESS IN MECHANICAL ALLOYING[J];粉末冶金技术;1999-04
7 wang Chengguo; Qi Baosen; Yang Junfa; Liu Yuxian(Shandong University of Technology, Jinan 250061);MECHANICAL ALLOYING OF Cu-C-Ti AND Cu-CuO-Al POWDERS[J];粉末冶金技术;1999-03
8 HE Zhengming,SHI Yaoming,XU Shiyue,DONG Chuanhua Department of Physics,Shanghai University,Shanghai,200072,China;The Study of XRD for Fe100- x Ni x Ultrafine Powder by the Mechanical Alloying[J];功能材料;1999-02
9 Yang Huaming and Qiu Guanzhou (Department of Mineral Engineering, Central South University of Technology, Changsha 410083, China);New Development of Mechanical Alloying (MA) Technology[J];稀有金属;1998-04
10 Liu Zhijian,Qu Xuanhui and Huang Baiyun(Central South University of Technology,Changsha 410083;Study on Reaction Synthesis of TiN by Mechanical Alloying[J];粉末冶金技术;1997-02
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 LI Jiaming;FAN Jinglian;HAN Yong;State Key Laboratory of Powder Metallurgy, Central South University;;Effect of temperature on interface behaviors of diffusion bonded iron and RAFMs[J];粉末冶金材料科学与工程;2017-02
2 YANG Yihang;WANG Dezhi;LIN Jia;LIN Gaoyong;MA Jidong;School of Materials Science and Engineering,Xiamen University of Technology;School of Material Science and Engineering,Central South University;;Study of low inter-solubility metallic composites and its interfacial model[J];功能材料;2015-24
3 WANG Bo;LIU Dongdong;DONG Zhongqi;SUN Huilan;LIU Jiajia;School of Materials Science and Engineering,Hebei University of Science and Technology;Material Engineering Department,Hebei College of Industry and Technology;;Research on the Development of Cu-Cr Mechanical Alloying[J];材料导报;2015-19
4 HU Ji-lin;HU Chuan-yue;LIU Xin;TIAN Xiu-ying;Department of Chemistry and Materials Science,Hunan Institute of Humanities,Science and Technology;College of Materials Science and Engineering,Hunan University;;Research Progress on Preparation Methods of SiC Powder and Its Sintering Aids[J];硅酸盐通报;2014-09
5 Liao Kai;Jie Xiaohua;Yao Yuan;Liu Ye;Faculty of Material and Energy,Guangdong University of Technology;;Preparation of Fe_3Al intermetallic compound powder by mechanical alloying and heat treatment[J];金属热处理;2014-02
6 SHI Kun-yu;SHEN Tao;CHEN Chun-hao;XUE Li-hong;YAN You-wei;State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology;;Cu-Cr nanocrystalline powder prepared by high-energy ball milling[J];粉末冶金材料科学与工程;2013-04
7 Lan Zhiqiang,Li Shubo,Lu Zhao,Gao Zhaoxi,Guo Jin (Key Laboratory of New Processing Technology for Non-Ferrous Metals and Materials,Ministry of Education,College of Physical Science and Technology,Guangxi University,Nanning 530004,China);Hydrogen Storage Properties of Mg_(76-x)Ti_(12+x)Ni_9Cr_3(x=4,8,12,16) Alloys by Mechanical Alloying[J];稀有金属;2011-04
8 Xie Haofeng,Mi Xujun,Huang Guojie,Yin Xiangqian,Li Yanfeng,Gao Baodong (State Key Laboratory of Non-Ferrous Metals and Processes,General Research Institute for Non-Ferrous Metals,Beijing 100088,China);Effects of Alloying Elements on Mechanical and Electrical Properties of Cu-Cr-Zr Alloy[J];稀有金属;2011-03
9 ZHOU Cheng,SUN Yong,GUO Zhongzheng,YING Guoxiang,PENG Mingjun(Key Laboratory of Advanced Materials Yunnan Province of Kunming University of Science and Technology,Kunming 650093);Characteristics of Cu-W Thin Films Deposited by Magnetron Sputtering and Effect of Heat-treatment[J];材料导报;2011-06
10 Guo Zhongzheng,Sun Yong,Duan Yonghua,Zhou Cheng,Peng Mingjun(Key Laboratory of Advanced Materials Yunnan Province,Kunming University of Science and Technology,Kunming 650093,China);Characteristics of Cu-Nb Thin Films Deposited by Magnetron Sputtering and Effect of Annealing[J];稀有金属;2011-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved