Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Acta Materiae Compositae Sinica》 2003-06
Add to Favorite Get Latest Update

SIMPLIFIED INITIAL STRESS ANALYSIS OF COMPOSITE FLYWHEEL IN TENSION WINDING

QIN Yong~1, XIA Yuanming~1, MAO Tianxiang~2(1.Dept. of Modern Mechanics, University of Science and Technology of China, 230027,China; 2.Institute of Mechanics,Academy of Science of China, Beijing 100080,China)  
The method of tension winding of fiber bundle is an effective way to improve the radial strength of flywheels. An approach of calculating the initial stress and deformation in tension winding according to misfit is advanced. The results show that the hoop stress decreases firstly and then increases while the radial compression stress decreases all the while in the qually winding tension. While in changed winding tension which is enhanced from lower to higher levels, the radial compression stress can be increased. It is not sufficient to use tension winding only in flywheel design. The tension winding and process of pressfit should be used together to design the rational initial radial compression stress.
【Fund】: 国家自然科学基金资助项目(10172085)
【CateGory Index】: TB330.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 7 Hits
1 QIN Yong~1, XIA Yuanming~1, MAO Tianxiang~2(1.Department of Modern Mechanics, University of Science and Technology of China,230027,China;2.Institute of Mechanics,Academy of Science of China, Beijing 100080,China);SIMPLIFIED ANALYSES OF MULTI-RING PRESSFIT OF COMPOSITE FLYWHEEL FABRICATED BY TENSION WINDING CONSIDERING THE UNLOAD OF INNER HOLE[J];Acta Materiae Compositae Sinica;2004-02
2 QIN Yong~1, XIA Yuanming~(1,*), MAO Tianxiang~2(1.Dept. of Modern Mechanics, University of Science and Technology of China,Mechanical Behavior and Design of Materials, University of Science and Technology of China, ASC, Hefei 230027,China;2.Institute of Mechanics,Academy of Science of China, Beijing 100080,China);ANALYSES OF THE CENTRIFUGAL STRESS OF MULTI-RINGINTERMIXING COMPOSITE FLYWHEEL[J];Acta Materiae Compositae Sinica;2004-04
3 QIN Yong~1, WANG Shuogui~1, XIA Yuanming~(1,*), MAO Tianxiang~2(1.Department of Modern Mechanics, University of Science and Technology of China,Key Laboratory of Mechanical Behavior and Design of Materials, USTC, ASC, Hefei 230027,China;2.Institute of Mechanics,Academy of Science of China, Beijing 100080,China);METHODS OF CALCULATING THE FAILURE ROTATING SPEED AND FAILURE EXPERIMENT OF COMPOSITE FLYWHEEL[J];Acta Materiae Compositae Sinica;2005-04
4 QIN Yong~1, XIA Yuanming~(1,*), MAO Tianxiang~2(1.Department of Modern Mechanics, University of Science and Technology of China,Key Laboratory of Mechanical Behavior and Design of Materials, USTC, ASC, Hefei 230027,China;2.Institute of Mechanics,Academy of Science of China, Beijing 100080,China);3D NUMERICAL ANALYSIS OF INITIAL STRESS OF COMPOSITE FLY WHEEL FABRICATED BY FILAMENT TENSION WINDING[J];Acta Materiae Compositae Sinica;2005-04
5 GUO Xingfeng(School of Textiles,Tianjin Polytechnic University,Tianjin 300160,China);Design of annular woven fabric used for composite flywheel winding[J];Journal of Textile Research;2007-07
6 LI YiLiang DAI XingJian ZHANG XiaoZhang( Department of Engineering Physics,Tsinghua University,Beijing 100084,China);RESEARCH ON PROCESS STRESS FOR CIRCUMFERENTIAL WOUND COMPOSITE FLYWHEEL ROTORS[J];Journal of Mechanical Strength;2010-02
7 LIANG Dong1,MIAO Si-en1,LIU Yan-feng2(1.Institute of Thermal Power Systems,Zhejiang University,Hangzhou 310027,China; 2.Hangzhou Tianpai Institute of Machinery and Electronic Products,Hangzhou 310004,China);Analysis based on temperature differential method and element deletion method of composite flywheel in tension winding[J];Energy Engineering;2011-01
China Proceedings of conference Full-text Database 1 Hits
1 Mao Tianxiang (Institute of Mechanics,Chinese Academy of Sciences,Beijing 100080,China);Development of composite flywheel energy storage system[A];[C];2007
【Citations】
Chinese Journal Full-text Database 2 Hits
1 GONG Neng- ping1,XIA Yuan- ming1,MAO Tian- xiang2 (1.Dept.of Mechanical Engineering,U niversity of Science and Technology of China,Hefei2 30 0 2 7,China; 2 .Institute of Mechanics,Academy of Science of China,Beijing10 0 0 80 ,China);DESIGN OF COMPOSITE FLYWHEEL STRUCTURE AND ITSSTRESSANALYSIS[J];Acta Materiae Compositae Sinica;2002-01
2 QIN Yong1, XIA Yuanming2, MAO Tianxiang3(1. Department of Modern Mechanics,University of Science and Technology of China, Hefei 230027, China;i 230027,China;3. Institute of Mechanics,Academy of Science of China,Beijing 100080,China);SIMPLIFIED AND FINE ANALYSES OF THE FULL DEFORMATION AND STRESS OF PRESSFIT OF THE HOLLOW MULTI-RING COMPOSITE FLYWHEEL[J];Acta Materiae Compositae Sinica;2003-05
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 QIN Yong~1,XIA Yuan-ming~2 (1.North China Institute of System Engineering,Beijing 100089,China;2.Department of Mechanics and Mechnical Engineering,University of Science and Technology of China,Hefei 230027,Anhui,China);A Study on the Structure and Strength of Composite Flywheel[J];Acta Armamentarii;2006-04
2 QIN Yong1, XIA Yuanming2, MAO Tianxiang3(1. Department of Modern Mechanics,University of Science and Technology of China, Hefei 230027, China;i 230027,China;3. Institute of Mechanics,Academy of Science of China,Beijing 100080,China);SIMPLIFIED AND FINE ANALYSES OF THE FULL DEFORMATION AND STRESS OF PRESSFIT OF THE HOLLOW MULTI-RING COMPOSITE FLYWHEEL[J];Acta Materiae Compositae Sinica;2003-05
3 QIN Yong~1, XIA Yuanming~1, MAO Tianxiang~2(1.Department of Modern Mechanics, University of Science and Technology of China,230027,China;2.Institute of Mechanics,Academy of Science of China, Beijing 100080,China);SIMPLIFIED ANALYSES OF MULTI-RING PRESSFIT OF COMPOSITE FLYWHEEL FABRICATED BY TENSION WINDING CONSIDERING THE UNLOAD OF INNER HOLE[J];Acta Materiae Compositae Sinica;2004-02
4 QIN Yong~1, XIA Yuanming~(1,*), MAO Tianxiang~2(1.Dept. of Modern Mechanics, University of Science and Technology of China,Mechanical Behavior and Design of Materials, University of Science and Technology of China, ASC, Hefei 230027,China;2.Institute of Mechanics,Academy of Science of China, Beijing 100080,China);ANALYSES OF THE CENTRIFUGAL STRESS OF MULTI-RINGINTERMIXING COMPOSITE FLYWHEEL[J];Acta Materiae Compositae Sinica;2004-04
5 QIN Yong~1, WANG Shuogui~1, XIA Yuanming~(1,*), MAO Tianxiang~2(1.Department of Modern Mechanics, University of Science and Technology of China,Key Laboratory of Mechanical Behavior and Design of Materials, USTC, ASC, Hefei 230027,China;2.Institute of Mechanics,Academy of Science of China, Beijing 100080,China);METHODS OF CALCULATING THE FAILURE ROTATING SPEED AND FAILURE EXPERIMENT OF COMPOSITE FLYWHEEL[J];Acta Materiae Compositae Sinica;2005-04
6 QIN Yong~1, XIA Yuanming~(1,*), MAO Tianxiang~2(1.Department of Modern Mechanics, University of Science and Technology of China,Key Laboratory of Mechanical Behavior and Design of Materials, USTC, ASC, Hefei 230027,China;2.Institute of Mechanics,Academy of Science of China, Beijing 100080,China);3D NUMERICAL ANALYSIS OF INITIAL STRESS OF COMPOSITE FLY WHEEL FABRICATED BY FILAMENT TENSION WINDING[J];Acta Materiae Compositae Sinica;2005-04
7 GUO Xingfeng(School of Textiles,Tianjin Polytechnic University,Tianjin 300160,China);Design of annular woven fabric used for composite flywheel winding[J];Journal of Textile Research;2007-07
8 XIE Xia1,2,JIANG Ya-ming1,QIU Guan-xiong1,WANG Peng2,XU Ai-fen2(1.Tianjin Polytechnic University,Tianjin 300160,China; 2.Military Traffic Institute,Tianjin 300161,China);Study on Axial Compressive Properties of Multidirectional Filament Wound Tubes[J];Materials for Mechanical Engineering;2007-10
9 LI Cheng1,WAN Zhi-chao2,ZHENG Yan-ping1,TIE Ying1(1.School of Mechanical Engineering,Zhengzhou University,Zhengzhou 450001,China;2.Luohe Medical College,Luohe 462002,China);Comparison of effects of different young's moduli on stress and displacement of composite flywheel[J];Optics and Precision Engineering;2009-07
10 Li Cheng1,Liu Zhi-hua1,Zhang Ping2 (1.School of Mechanical Engineering,Zhengzhou University,Zhengzhou 450002,China;2.State Key Lab of Applied Optics,Changchun Institute of Optics, Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China);Analysis on stress and displacement of a composite flywheel composed of two-layer rotor with pre-displacement[J];Journal of Jilin University(Engineering and Technology Edition);2007-04
China Proceedings of conference Full-text Database 4 Hits
1 Qin Yong Xia Yuanming Mao Tianxiang (Dept. of Mechanical Engineering, University of Science and Technology of China Key Laboratory of Mechanical Behavior and Design of Materials, USTC, ASC, Hefei, 230027; Institute of Mechanics, Academy of Science of Qlina, Beijing, 100080);STRESS ANALYSIS OF COMPOSITE FLYWHEEL IN TENSION WINDING[A];[C];2002
2 Wang Chenglin, Zhangzhijing, Jin Xin, Ma Bin, Liu Zhen (Beijing Institute of Technology, Beijing , 100081);The design and analysis of The experimental tray used in Super acceleration revolving experimental equipment[A];[C];2005
3 Mao Tianxiang (Institute of Mechanics,Chinese Academy of Sciences,Beijing 100080,China);Development of composite flywheel energy storage system[A];[C];2007
4 Xia Zhou1 Hongcai Li 1 Huili Dou2 Chengwei Wu1(1State Key Laboratory of Structural Analysis for Industrial Equipment,Department of Engineering Mechanics,Faculty of Vehicle Engineering and Mechanics,Dalian University of Technology,Dalian 116024,China)(2The Technique Center of China First Automobile Group Company,Changchun 130011,China);STRESS AND FRACTURE DAMAGE ANALYSIS OF NODULAR IRON FLYWHEEL FOR DIESEL ENGINE[A];[C];2010
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Li,ZHANG HengCorrespondent:ZHANG Li,Beijing Technology and Besiness University,Beijing 100037,China;Progress in study of flywheels made of composites[J];Ordnance Material Science and Engineering;2001-05
2 Li Yuehou(Machinery Production Factory,No.2,Inner Mongolia);A THEORETICAL STUDY ON THE SWAGE AUTOFRETTAGE OF GUN TUBES (THICK-WALL HOLLOW CYLINDERS)[J];Acta Armamentarii;1995-01
3 Fang Jiancheng Sun Jinji(School of Instrument Science and Opto-electronics Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);New permanent magnet biased radial magnetic bearing in magnetic suspending flywheel application[J];Journal of Beijing University of Aeronautics and Astronautics;2006-11
4 Ding Baogen Yang Fujiang (Tianji Engineering Research Institute of Nuclear Industry);STUDY OF WINDING TENSION FORMLAS[J];Fiber Reinforced Plastics/composite;2000-06
5 Ding Baogeng Yang Fujiang Wang Yan (Tianjin Research Institute of Physical & Chemical Engineering of Nuclear Industry);FINITE ELEMENT ANALYSIS OF GLASSFIBER WINDING TENSION ON THE END AREA[J];Fiber Reinforced Plastics/composite;2001-03
6 WANG Jian-hua,QIAN Lin-fang,YUAN Ren-shu(School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China);INFLUENCE OF MATERIAL VOLUME FRACTIONS ON THERMAL RESIDUAL STRESS IN COMPOSITE BARREL[J];Fiber Reinforced Plastics/Composites;2006-06
7 Xu Lianggong (Jiangsu Chemical Fertilizer Industry Co.);THERMAL RESIDUAL STRESS IN FILAMENT WINDING FRP PIPE[J];FIBER REINFORCED PLASTICS/COMPOSITES;1997-01
8 Chen Huanmin;Qi Shuhua(Shenyang Aeronautics College);Solidfied Computer-mould of Resin Matrix Composite[J];JOURNAL OF MATERIALS ENGINEERING;1995-11
9 LIU Huai-xi~1,HE Yue-jin~2,ZHANG Heng~1 (1. Zhengzhou University,Zhengzhou 450052, China;2. Zhengzhou Institute of Light Industry, Zhengzhou 450052, China);Structure Simulative Experiment by Using Acoustic Emission to Detect the Damage and Fracture in Composite Flywheel[J];Development and Application of Materials;2004-04
10 BAG Yiwang SU Shengbiao HUANG Jowlay(China Building Materials Academy, Beijing 100024 Dept. Materials Science and Engineering, Cheng-Kung University, Tainan 70101, China-Taiwan);RESIDUAL STRESS AND INTERFACE STRESS IN SYMMETRIC LAMINATED COMPOSITES[J];Chinese Journal of Material Research;2002-05
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 QIN Yong~1,XIA Yuan-ming~2 (1.North China Institute of System Engineering,Beijing 100089,China;2.Department of Mechanics and Mechnical Engineering,University of Science and Technology of China,Hefei 230027,Anhui,China);A Study on the Structure and Strength of Composite Flywheel[J];Acta Armamentarii;2006-04
2 LI Cheng,ZHENG Yan-ping,TIE Ying(School of Mechanical Engineering,Zhengzhou University,Zhengzhou 450001,Henan,China);Influence of Boundary Conditions on the Stress and Displacement Distribution of Composite Energy Storage Flywheel[J];Acta Armamentarii;2008-10
3 QIN Yong~1, XIA Yuanming~(1,*), MAO Tianxiang~2(1.Dept. of Modern Mechanics, University of Science and Technology of China,Mechanical Behavior and Design of Materials, University of Science and Technology of China, ASC, Hefei 230027,China;2.Institute of Mechanics,Academy of Science of China, Beijing 100080,China);ANALYSES OF THE CENTRIFUGAL STRESS OF MULTI-RINGINTERMIXING COMPOSITE FLYWHEEL[J];Acta Materiae Compositae Sinica;2004-04
4 QIN Yong~1, WANG Shuogui~1, XIA Yuanming~(1,*), MAO Tianxiang~2(1.Department of Modern Mechanics, University of Science and Technology of China,Key Laboratory of Mechanical Behavior and Design of Materials, USTC, ASC, Hefei 230027,China;2.Institute of Mechanics,Academy of Science of China, Beijing 100080,China);METHODS OF CALCULATING THE FAILURE ROTATING SPEED AND FAILURE EXPERIMENT OF COMPOSITE FLYWHEEL[J];Acta Materiae Compositae Sinica;2005-04
5 QIN Yong~1, XIA Yuanming~(1,*), MAO Tianxiang~2(1.Department of Modern Mechanics, University of Science and Technology of China,Key Laboratory of Mechanical Behavior and Design of Materials, USTC, ASC, Hefei 230027,China;2.Institute of Mechanics,Academy of Science of China, Beijing 100080,China);3D NUMERICAL ANALYSIS OF INITIAL STRESS OF COMPOSITE FLY WHEEL FABRICATED BY FILAMENT TENSION WINDING[J];Acta Materiae Compositae Sinica;2005-04
6 LI Cheng1,WAN Zhi-chao2,ZHENG Yan-ping1,TIE Ying1(1.School of Mechanical Engineering,Zhengzhou University,Zhengzhou 450001,China;2.Luohe Medical College,Luohe 462002,China);Comparison of effects of different young's moduli on stress and displacement of composite flywheel[J];Optics and Precision Engineering;2009-07
7 WU Hua-chun, HU Ye-fa, WANG Xiao-guang, JIANG Zheng-feng (School of Mechanical Engineering, Wuhan University of Technology, Wuhan 430070, China);Overview of Study on System of Vehicle Magnetic Levitation Flywheel Battery[J];Mechanical Engineer;2005-08
8 WANG Jian, DAI Xing-jian, Li Yi-liang (The Department of Engineering Physics Tsinghua University, Beijng 100084, China);Progress of Bearing Technology for Flywheel Energy Storage System[J];Mechanical Engineer;2008-04
9 Ding Shihai,Li Yiliang,Dai Xingjian(Department of Engineering Physics,Tsinghua University,Beijing 100084);Structural Finite Element Analysis and Spin Tests of Energy Storage Flywheel[J];Mechanical Science and Technology for Aerospace Engineering;2008-03
10 LI Cheng TIE Ying ZHENG Yanping(School of Mechanical Engineering,Zhengzhou University,Zhengzhou 450001);Stress and Displacement Calculation of Composite Material Energy Storage Flywheel with Two-layer Pre-stressed Rotor Structure[J];Journal of Mechanical Engineering;2009-12
China Proceedings of conference Full-text Database 2 Hits
1 Guo Xing-feng (School of Textiles,Tianjin Polytechnic University,Tianjin 300160);The Structural Design And Winding Formation Of Woven Preforms Used For Revolutionary Solid Composites[A];[C];2008
2 Mao Tianxiang (Institute of Mechanics,Chinese Academy of Sciences,Beijing 100080,China);Development of composite flywheel energy storage system[A];[C];2007
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 GONG Neng- ping1,XIA Yuan- ming1,MAO Tian- xiang2 (1.Dept.of Mechanical Engineering,U niversity of Science and Technology of China,Hefei2 30 0 2 7,China; 2 .Institute of Mechanics,Academy of Science of China,Beijing10 0 0 80 ,China);DESIGN OF COMPOSITE FLYWHEEL STRUCTURE AND ITSSTRESSANALYSIS[J];Acta Materiae Compositae Sinica;2002-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved