Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Acta Materiae Compositae Sinica》 2015-03
Add to Favorite Get Latest Update

Microstructure and mechanical properties of TiC_(0.7)N_(0.3) reinforcing ZrO_2 matrix composites

ZHANG Mengwen;HAN Chengwei;XIU Zhimeng;SUN Xudong;Key Laboratory for Anisotropy and Texture of Materials,Ministry of Education,Northeastern University;  
To enhance the hardness of ZrO2 matrix composites,TiC0.7N0.3/ZrO2 composites were fabricated by hot pressing method,and the effects of TiC0.7N0.3 particle reinforcing phase on the phase composition,microstructure and mechanical properties of the composites were investigated.The results show that the addition of TiC0.7N0.3has the effect to stabilize tetragonal ZrO2(t-ZrO2),and can improve the t-ZrO2 content in TiC0.7N0.3/ZrO2 composites,thus improve the fracture toughness.With the hot pressing temperature and TiC0.7N0.3content increasing,the hardness of composites increases.When hot pressing at 1 400 ℃,TiC0.7N0.3decomposes partially,and the released N can react with reduced ZrO2 to form ZrN,which increases the hardness of composites.The relative density of35wt% TiC0.7N0.3/ZrO2 composites after hot pressing at 1 400 ℃ exceeds 99.9% and Vickers hardness reaches17 GPa.While the fracture toughness of composites is higher after hot pressing at 1 300 ℃,which is 6.48 MPa·m1/2.The conclusions provide references for microstructure controlling and improvement TiC0.7N0.3/ZrO2 composite properties.
【Fund】: 国家科技重大专项(2012ZX04003-061)
【CateGory Index】: TB332
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 2 Hits
1 PEI Yang;ZHU Shigen;QU Haixia;School of Mechanical Engineering,Donghua University;Engineering Research Center of Advanced Textile Machinery,Ministry of Education,School of Mechanical Engineering,Donghua University;;Two-step hot-pressing sintering of composite WC-40%Al_2O_3 compacts[J];Acta Materiae Compositae Sinica;2013-06
2 CHEN De - yong, LI Jun - chu, MIN Si - lin, YANG Gang (Nanchang Institute of Aeronautical Technology, Nanchang, Jiangxi 330034 China);Study on the structures and properties of ZrO2-Al2O3 composites[J];Journal of Nanchang Institute of Aeronautical Technology;2005-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 TANG Guo-cai(Ningbo Yunsheng & Co.,Ltd.,Ningbo 315040,China);Preparation of ZrO_2 Ceramic Seal Gasket for Air Conditioning Compressor[J];Anhui Chemical Industry;2010-06
2 Wang Jin,Wang Junxia,Shao Mingwei(School of Materials Science and Engineering,South West University of Science and Technology,Mianyang 621010,China);Dispersion Stability of Nano-sized ZrO_2 or Al_2O_3 Powder and Their Complex Powder[J];China Powder Science and Technology;2010-04
3 ZHAO Ran,SUN Hong-wei,LIU Hui-juan,HU Shao-jie,HU Xing(Key Laboratory of Material Physics of Education Ministry,School of Physial Engineering,Zhengzhou University,Zhengzhou 450052,China);Effect of Composite Sintering Additives on Al_2O_3-ZrO_2 Ceramics Relative Density[J];Bulletin of the Chinese Ceramic Society;2011-02
4 Liu Zhenying Xu Bin(School of Material,Anhui Polytechnic University,Anhui,Huainan 232001);Effect of Sintering Temperature on Properties of Baddeleyite Corundum Composite Ceramic Powder[J];Non-Metallic Mines;2013-03
5 WANG Mingyuan;LI Junshou;LI Su;ZHAO Fang;WU Xiaojuan;Institute of Advanced Materials,Mechanical Engineering College;;Research Progress of TiB_2 Diphase Ceramic Materials[J];Materials Review;2014-S1
6 ;Method of Strengthening toughness of dental ceramics and Status quo of its application[J];Chinese Journal of Dental Materials and Devices;2007-03
7 Liu Dongliang Jin Yongzhong Deng Jianguo(Dept.of Materials and Chemical Engineering,Sichuan University of Sciences & Engineering,Zigong 643000);Methods of Toughen Alumina Materials[J];Advanced Ceramics;2006-03
8 WANG Chen;ZHAO Fei;HAN Yaling;GUO Sicong;WANG Nan;HAN Yang;School of Materials Science and Engineering,Jilin University of Chemical Technology;School of Materials Science and Engineering,Shenyang University of Technology;Beijing Luxing Hongda Electronics Technology Company Limited;;Distribution and Fracture Toughening Mechanism of ZrO_2 Particles in ZrO_2/Al2_O_3 Ceramic[J];China Ceramics;2014-05
9 LI Qiangwei;HUA Xiaohong;Suzhou University;Suzhou Industrial Park of Vocational College;;Study on Al_2O_3/ZrO_2 Metal-Ceramic Compound Die Materials[J];China Ceramics;2014-11
10 ZHU Jian-feng;XIAO Dan;LI Cui-yan;HUANG Jian-feng;YONG Xiang;CAO Li-yun;FEI Jie;School of Materials Science and Engineering,Shaanxi University of Science & Technology;;Microwave hydrothermal synthesis and crystallization mechanism of tetragonal phase zirconia nanocrystalline[J];Journal of Shaanxi University of Science & Technology(Natural Science Edition);2015-02
【Secondary Citations】
Chinese Journal Full-text Database 7 Hits
1 XU Chong hai 1, SUN De ming 2, FENG Yan xia 1, HUANG Chuan zhen 3, AI Xing 3 (1.Department of Mechanical and Electronic Engineering, Shandong Institute of Light Industry, Jinan 250100; 2.Educational Administration,Shandong Institute of Architec;FINITE ELEMENT MODELING OF THE RESIDUAL THERMAL STRESSES IN MULTIPHASE COMPOSITE CERAMIC TOOL MATERIAL[J];Acta Materiae Compositae Sinica;2001-03
2 CHEN Yong1,WU Yucheng1,YU Fuwen1,CHEN Junling2(1.School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China;2.Institute of Plasma Physics,Chinese Academy of Science,Hefei 230031,China);Structure and mechanical properties of La_2O_3-TiC/W composites[J];Acta Materiae Compositae Sinica;2008-05
3 LEI Yan~(1,2), XIONG Wei-hao~1, LIANG Zai-guo~1 (1. Huazhong University of Science and Technology, Wuhan 430074, China; 2. Wuhan University of Technology, Wuhan 430070, China);The Research Progress of Spark Plasma Sintering for Metal-ceramic Composite Materials[J];Materials For Mechanical Engineering;2004-06
4 Shi Jianlin(Shanghai Institute of Ceramics,Chinese Academy of Sciences);SOLID STATE SINTERING Ⅱ—— RELATION BETWEEN COARSENING AND DENSIFICATION AND MASS TRANSPORT PATH[J];JOURNAL OF THE CHINESE CERAMIC SOCIETY;1997-06
5 QI Zheng-feng,REN Rui-ming(Dalian Jiaotong University,Dalian Liaoning 116028,China);Development of cutting tool materials at home and abroad[J];Heat Treatment of Metals;2008-01
6 CHENG Tao,WANG Chong-lu(State Key Laboratory of Advanced Technology for Materials Synthesis and Processing of Wuhan University of Science and Engineering,Wuhan 430070,China);Latest development of Nano-cemented Carbide[J];Rare Metals & Cemented Carbides;2006-03
7 Zhang Li Wu Houping (State Key Laboratory of Powder Metallurgy, Central South University, Hunan Changsha 410083);Status of Cemented Carbide Industry both at Home and Abroad[J];Cemented Carbide;2009-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved