Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Liaoning Technical University (Natural Science Edition)》 2002-01
Add to Favorite Get Latest Update

Simulation Study of Grooving Section Patterns for a Horizontal Cutting Header When Swing and Cutting

LI Xiao-huo, KUI Jin-wen, LIU Li (College of Mechanical Engineering, Liaoning Technical University ,Fuxin 123000 ,China)  
Using a grooving section pattern may analyze and appraise design quality of a cutting head and cutting performance of a roadheader.Up to now, the pattern is artificially drawn during design of a cutting head. through setting mathematical modal and computer aided design simulation of the pattern is realized, simulating method of grooving section patterns for a horizontal roadheader cutting head under swing and cutting is introduced in the paper, as an example, the patterns of the machin are simulated and analyzed, which give a simple and direct, effective method studying cutting performances of the machine.
【Fund】: 国家自然科学基金资助项目(批准号:59774033)
【CateGory Index】: TD421.5
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 LI Xiao-huo(College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China);Simulation study on cutting patterns for longitudinal-axial-roadheader in drilling[J];Journal of Liaoning Technical University;2005-05
2 LI Xiao-huo,YU Xin-wei, MA Xiao-hong (College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000,China; College of Mechanical Engineering, Heilongjiang Scientific and Technical Institute, Harbin 150027,China);Kinematics analysis of cutting drums of a continuous miner[J];Journal of Liaoning Technical University;2005-06
3 YU Xin-wei~(1,2),MAXiao-hong~(1,2),LIXiao-huo~1 (1.College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China;2.College of Mechanical Engineering,Heilongjiang Scientific and Technical Institute,Haerbin 150027,China);Optimization model for operating mechanism of continuous miner[J];Journal of Liaoning Technical University;2005-S2
4 MA Xiao-hong~(1,2),LI Xiao-huo~1,YU Xin-wei~(1,2) (1.College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China;2.College of Mechanical Engineering,Heilongjiang Scientific and Technical Institute,Harbin 150027,China);Application of visual simulation for designof continuous miner drum[J];Journal of Liaoning Technical University;2005-S2
5 YANG Li-hua LI Xiao-huo (College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China);Dynamic simulation of continuous miner drum based on Pro/E and ADAMS[J];Journal of Liaoning Technical University;2007-S2
6 LI Xiao-huo (Mechanical Engineering College, Liaoning Technical University,Fuxin 123000,China);Dynamic models of horizontal-axial-roadheader as vertical cutting[J];Chinese Journal of Construction Machinery;2006-01
7 CONG Ri-yong1, BAI Xin-yu2, QAO Qi3(1.Sany Heavy Equipment Co.,Ltd.,Shenyang 110027,China;2.Shenyang Aircraft Industrial Corporation,Shengyang 110027,China;3.Colleage of Mechanical Engineering and Automation,Liaoning University of Technology,Jinzhou 121017,China);Calculation on filing thickness of excavating tooth using filing diagram[J];Chinese Journal of Construction Machinery;2007-04
8 LI Xiaohuo(Mechanical Engineering College of Liaoning Technical University,Fuxin 123000,China);Dynamic modeling of horizontal-axial-roadheader as transverse cutting[J];Journal of Heilongjiang Institute of Science and Technology;2006-06
9 LI Xiao-huo~1,MA Xiao-hong~(1,2)(1.Institute of Mechanical Engineering,Liao-ning Technical University,Fu-xin 123000,China;2.Institute of Mechanical Enginneering,Heilongjiang Institute of Science and Technology,Harbin 150027,China);Visual Study of Cutting Drawing for Continuous Miner[J];Colliery Mechanical & Electrical Technology;2008-04
10 SHI Xiu-bao~1,LU Mi-qi~1,CAO Zhi-juan~2(1.College of Mechanical Engineering of Liaoning Technical University,Fuxin 123000,China.2.College of Business Administration of Liaoning Technical University,Huludao 125105,China);Simulation Research of Cutting Process of Cutting Head of Longitudinal-axial-roadheader Based on Matlab[J];Industry and Mine Automation;2010-01
【Citations】
Chinese Journal Full-text Database 1 Hits
1 LI Xiaohuo, TIAN Jing ,HUANG Yan (Mechanical Engineering College of Liaoning Technical University, Fuxin 123000, China);Kinematics Simulation of a Horizontal Cutting Head in Cutting Process[J];Journal of Heilongjiang Institute of Science;2001-01
【Co-citations】
Chinese Journal Full-text Database 6 Hits
1 LI Xiao-huo,YU Xin-wei, MA Xiao-hong (College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000,China; College of Mechanical Engineering, Heilongjiang Scientific and Technical Institute, Harbin 150027,China);Kinematics analysis of cutting drums of a continuous miner[J];Journal of Liaoning Technical University;2005-06
2 YANG Li-hua LI Xiao-huo (College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China);Dynamic simulation of continuous miner drum based on Pro/E and ADAMS[J];Journal of Liaoning Technical University;2007-S2
3 LI Xiao-huo (Mechanical Engineering College, Liaoning Technical University,Fuxin 123000,China);Dynamic models of horizontal-axial-roadheader as vertical cutting[J];Chinese Journal of Construction Machinery;2006-01
4 LI Xiaohuo(Mechanical Engineering College of Liaoning Technical University,Fuxin 123000,China);Dynamic modeling of horizontal-axial-roadheader as transverse cutting[J];Journal of Heilongjiang Institute of Science and Technology;2006-06
5 LI Xiaoyu;Development Prospect of Domestic Continuous Shearer[J];Mining & Processing Equipment;2007-12
6 ZHANG Qiang1,MAO Jun1,TIAN Da-feng2(1.College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China;2.Fuxin Mining Company,Fuxin 123000,China);Multi-objective optimization fuzzy reliability design for cutting head of roadheader based on genetic algorithm[J];Journal of China Coal Society;2008-12
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Zhao Yangang Jiang Jinren (Institute of Engineering Mechanics,State Seismological Bureau,Harbin 150080 China);A STRUCTURAL RELIABILITY ANALYSIS METHOD BASED ON GENETIC ALGORITHM[J];Earthquake Engineering and Engineering Vibration;1995-03
2 Li Xiaohuo Cheng Dongtang;SIMULATION RESEARCH OF CUTTING HEAD LOADS[J];;1990-03
3 Zhan Jinbo Li Xiaohuo Yao Yujun;Mean Load Simulation of Roadheader Cutting Head[J];;1993-03
4 Zhang Jinbo (College of computer and Information Engineering Hohai Univ,Chang Zhou,China);The Calculation of the Instaneous Thickness of Cutting Chip on the Shearer Helical Drum[J];Journal of Liaoning Technical University;1998-04
5 Li Xiaohuo Wang Mingtie Zhang Xiukui Yang Guohua (Mechanical Engineering College, Liaoning Technical University,FuXin,China);Analyses of Factors Effecting Lump Ratio and Dust Cut by Shearers and Roadheaders[J];Journal of Liaoning Technical University;1998-06
6 Li Xiaohuo; Yin Baifeng; Li Haibin (Mechanical Engineering College, Liaoning Technical University, Fuxin, China);Experimental Researches on Cutting with Concial Picks[J];JOURNAL OF LIAONING TECHNICAL UNIVERSITY (NATURAL SCIENCE EDITION);1999-06
7 Guo Yingfu; Luo Shanming (Xiang Tan Polytechnic UnivcrsitycoangTan,China);CAD for Shearer Drum[J];JOURNAL OF LIAONING TECHNICAL UNIVERSITY (NATURAL SCIENCE EDITION);1999-06
8 LI Xiao huo (Mechnical Engineering College,Liaoning Techanical University,Fuxin China);The Simulation Study of Hard Parcels Distributed in Coal Seam[J];JOURNAL OF LIAONING TECHNICAL UNIVERSITY (NATURAL SCIENCE EDITION);2000-04
9 LI Xiao huo (Mechanical Engineering College, Liaoning Technical University,Fuxin 123000,China);Study of Cutting Performance for a Flat Pick[J];JOURNAL OF LIAONING TECHNICAL UNIVERSITY (NATURAL SCIENCE EDITION);2000-05
10 WANG Chun-hua,LI Gui-xuan,WANG Qi (Mechanical Engineering College,Liaoning Technical University,Fuxin 123000,China);Experiment Research on Consumption of Electricity Per Ton and Block Size in Pick Cutting[J];Journal of Liaoning Technical University (Natural Science Edition);2002-02
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 LI Xiao-huo,BAI Xin-yu(College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China);Algorithm of momentary cutting thickness of pick on continuous miner[J];Journal of Liaoning Technical University;2006-05
2 LIANG Xiao-dong,LI Xiao-huo (College of Mechanical Engineer,Liaoning Technical University,Fuxin 123000,China);Determination of star wheel loading mechanism's lowest rotating speed of road-headers which don't jam[J];Journal of Liaoning Technical University;2006-S2
3 SHA Yong-dong,LI Xiao-huo (College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,china);Fuzzy optimization model for structural parameters of longitudinal cutting head of roadheader[J];Journal of Liaoning Technical University;2006-S2
4 ZHANG Ding-tang,LI Xiao-huo (College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China);Dynamic simulation model of steering of a continuous miner[J];Journal of Liaoning Technical University;2006-S2
5 LI Xiao-huo,ZHANG Ding-tang(College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China);Dynamic model of continuous miner’s cutting arm based on distributed mass law[J];Journal of Liaoning Technical University;2007-01
6 XU Zhen-yu LI Xiao-huo (College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China);Optimal design of continuous miner parameters based on genetic algorithm[J];Journal of Liaoning Technical University;2007-S2
7 LI Xiaohuo,ZUO Shengjia(College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China);Modeling and simulation of work condition parameters of cutting mechanism for vibration roadheader[J];Journal of Liaoning Technical University(Natural Science);2008-04
8 YU Xinwei1,MA Xiaohong1,LI Xiaohuo2(1.College of Mechanical Engineering,Heilongjiang Scientific and Technical Institute,Haerbin 150027,China;2.College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China);Optimal design of continuous miner drum based on genetic algorithm[J];Journal of Liaoning Technical University(Natural Science);2008-05
9 CONG Ri-yong1, BAI Xin-yu2, QAO Qi3(1.Sany Heavy Equipment Co.,Ltd.,Shenyang 110027,China;2.Shenyang Aircraft Industrial Corporation,Shengyang 110027,China;3.Colleage of Mechanical Engineering and Automation,Liaoning University of Technology,Jinzhou 121017,China);Calculation on filing thickness of excavating tooth using filing diagram[J];Chinese Journal of Construction Machinery;2007-04
10 LI Xiaohuo,YANG Lihua(College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China);Parametric design of continuous miner drum on customized development of Pro/E[J];Journal of Heilongjiang Institute of Science and Technology;2007-06
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 Li Xiaohuo(Liaoning University of Engineering and Technology);Kinematic Analysis and Simplification of a Longitudinal Cutting Head for Roadheader[J];JOURNAL OF HEILONGJIANG MINING INSTITUTE;1998-03
2 Li Xiaohuo (Liaoning University of Engineering Fuxin 123000);Layout and Parameter Selection of The Partial Cross section Tunnelling Machine[J];EXPLORATION ENGINEERING (DRILLING & TUNNELING);1998-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved