Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Liaoning Technical University(Natural Science)》 2009-01
Add to Favorite Get Latest Update

Flywheel effect of the heavy spiral drum on shearer

LIU Chunsheng1,YU Xinwei1,Yan Xiaolin2(1.College of Mechanical Engineering,Heilongjiang Institute of Science and Technology,Harbin 150027,China;2.Jixi Coal Machinery Limited Company,Jixi 158100,China)  
Based on the load characteristics of shearer cutting drum,the extraordinary function of heavy cutting drum,i.e.wear resistant capacity is pointed out,which could raise cutting drum life and capacity of cutting hard coal.And the application mechanism of flywheel effect is revealed on operating mechanism.According to the conversion model of kinetic energy and potential energy,the concepts of additional inertial torque and additional dynamic cutting intensity are put forward and the relationship between the fluctuation quantity and the moment of inertia of cutting drum is established It provides the necessary theoretical basis for decreasing the shearer vibration and designing reasonable structure of cutting drum.
【Fund】: 黑龙江省国际科技合作重点攻关项目(WB01104)
【CateGory Index】: TD421.6
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 2 Hits
1 LIU Chun-sheng (Heilongjiang Scientific and Technical Institute, Jixi 158105,China);Research on the installing angle of shearer pick-shaped cutter[J];Journal of Liaoning Technical University;2002-05
2 LIU Chun-sheng,ZHAO Han-qing,QI Li-ping(College of Mechanical Engineering,Heilongjiang Institute of Science and Technology,Harbin 150027,China);Detection and transform modeling for sectional-formation geometrical dimensions of boom-type excavators[J];Chinese Journal of Construction Machinery;2008-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIU Chun-sheng (Dept. of Mechanical Engineering, Heilongjiang Scientific and Technical Institute,Haerbin 150027,China);Stress analysis on welded seam and carbide bit of the pick-shaped cutter[J];Journal of Liaoning Technical University;2004-01
2 LIU Chunsheng,ZHAO Hongmei(College of Mechanical Engineering,Heilongjiang Institute of Science and Technology,Harbin 150027,China);Loading mechanism and capacity of spiral drum with axial slop blade[J];Journal of Heilongjiang Institute of Science and Technology;2007-01
3 REN Changyu1,YU Xinwei2(1.Teaching Administration Office,Heilongjiang Institute of Science and Technology;2.College of Mechanical Engineering,Heilongjiang Institute of Science and Technology,Harbin 150027,China);Drum plate pick arrangement and installation on shearer[J];Journal of Heilongjiang Institute of Science and Technology;2008-04
4 LI Tijian DU Changlong School of Mechanical and Electrical Engineering,China University of Mining and Technology Xuzhou,Jiangsu 221008,China;Discussion on Problems in Parameter Optimization of Shearer with High Rate of Lump Coal[J];Mining & Processing Equipment;2008-05
5 WANG Xiang DU Changlong LIU Songyong College of Mechanical and Electrical Engineering,CUMT,Xuzhou,Jiangsu 221008,China;Improvement of the Cutting Unit for MG300/700-WD Shearer[J];Mining & Processing Equipment;2008-19
6 Zhao Hanqing,Liu Chunsheng,Li Haiyan(School of Mechanical Engineering,Heilongjiang Institute of Science and Technology,Harbin,Heilongjiang 150027,China);Matching Model of the Accuracy of Roadway Section Forming and the Precision of Sensor for Roadheader[J];Mining Research and Development;2009-03
7 WANG Yue-hui1,2,HUA Jun1,GUO Wu3(1.Northeast Forestry University,Heilongjiang Harbin 150040,China;2.College of Jiamusi University,Heilongjiang Jiamusi 154007,China;3.Jiamusi Coal Mine Machinery Factory,Heilongjiang Jiamusi 154007,China);Improvement Design of Structure of Conical Bits[J];Forestry Machinery & Woodworking Equipment;2006-01
8 SONG Xiang-kun~1,DU Chang-long~2,SHENG Yong-lin~1,SHENG Dong-fang~1(1.China Coal Research Institute Shanghai Ltd.,Shanghai 200030,China;2.College of Mechanical and Electrical Engineering,China University of Mining & Technology,Xuzhou 221008,China);Kinematic Study of Coal Auger Bit[J];Colliery Mechanical & Electrical Technology;2008-02
9 ZHANG Dong_sheng~1, DU Chang long~1, LI Hui~2 (1.China University of Mining and Technology, Xuzhou 221008,China; 2.Datun Coal & Power Co., Ltd.,Supply Department, Xuzhou 221611,China);The Research on the Moving Apparatus of the Shears[J];Coal Mine Machinery;2005-03
10 LIU Chun-sheng~1,WANG Xu-dong~2 (1.Mechanical Engineering College of Heilongjiang Science and Technology Institute,Harbin 150027,China;2.Jixi Coal Mining Group Dongshan Coal Mining Ltd.,Jixi 158130,China);Fit Gap Width of Drawbar Machine Guide Shoes for Shearer[J];Coal Mine Machinery;2005-10
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 Li Xiaohuo; Yin Baifeng; Li Haibin (Mechanical Engineering College, Liaoning Technical University, Fuxin, China);Experimental Researches on Cutting with Concial Picks[J];JOURNAL OF LIAONING TECHNICAL UNIVERSITY (NATURAL SCIENCE EDITION);1999-06
2 XIANG Yang,HU Ying xi (Department of Mining Engineering,GUT,Guiyang 550003);The Mathematic Model of the Section Shaping Control of the Drifting Machine with Swinging Arm[J];JOURNAL OF GUIZHOU UNIVERSITY OF TECHNOLOGY(NATURAL SCIENCE EDITION);1999-05
3 Xi'an University of Science & Technology School of Mechanical Engineering Xi'an Ning zhongliang Chen jiasheng;Primary Discussion On Intelligentized Developing Direction of Boom-type Roadheader[J];Coal Mine Modernization;2006-02
4 ZHANG Shi-yong(Dept.I.of Shaanxi University of techonology,Hanzhong 723003,China);Research on Boom-type roadheader auto profiling control[J];Journal of Shaanxi University of Technology;2005-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved