Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Textile Research》 2005-05
Add to Favorite Get Latest Update

Maximum speed of the jacquard and analysis of the force acting upon the cross needles and main hooks

LI Zhi-xiang, HE Wei-lin(Zhejiang University of Science and Technology,Hangzhou,Zhejiang 310018,China)  
Through analyzing the force acting upon the main hooks,the maximum speed of various kinds of down-pull element can be computed. This may apply to the high speed jacquard as well as the electronic jacquard. Proper selection of materials for making main hooks will prolong the service life of the figure pattern card. This may provide a reference for the manufacturer and designing units.
【CateGory Index】: TS103.33
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 1 Hits
1 Lee Zhixiang et al;An Analysis of High Speed Jacquard with Spandex Yarn Reversing Heald[J];Journal of Textile Research;1993-03
Chinese Journal Full-text Database 10 Hits
1 YU Xiao-ning;SUN Cheng-cheng;ZHANG Qin Dept. of Electronic Engineering, Tsinghua University, Beijing 100084, CHN;Improved Algorithm of Wavelength Tuning of FBG by a Freely Supported Beam[J];Semiconductor Optoelectronics;2004-02
2 LV Chen-gang 1, WU xing 2, GE Chun-feng 2, ZHANG Rui-feng 2 (College of Precision Instrument & Opto-electronic Engineering, Tianjin University, Tianjin 300072, China);Study on FBG Strain Sensor and Demodulation[J];Journal of Transcluction Technology;2004-01
3 Lu Da Fan Longbao (Department of Physics,Changshu College, Changshu 215500,China);Development of electromagnetic parameters automatic test system of electromagnetic valve for electronic jacquards[J];Journal of Southeast University (Natural Science Edition);2003-S1
4 ZHANG Wei-bin (College of Mechanichal Engineering,Liaoning Technical University,Fuxin 123000,China);Study on parameter relation of rolling machine[J];Journal of Liaoning Technical University;2007-S2
5 LI Zhi-xiang,HE Wei-lin(Mech-control College Zhejiang University of Technology,Hangzhou 310033,China);The Analysis of the Force on the Driver Needles and the Upright Needles in Relation to the Utmost Speed[J];Textile Accessories;2005-05
6 MAO Wen-gui (Dept.of Mech and Elect.Eng.,Hunan Institute of Engineering,Xiangtan 411101,China);Two Identification of Maximal Principal Stress and Its Orientation in Plane Stress Problem[J];Journal of Hunan Institute of Engineering;2002-04
7 SHI Guang~1 LIU Zhi-Chun~1 LIU Wei~1 LIU Sheng~2 (1.School of Energy and Power Engineering,Huazhong University of Science and Technology,Wuhan 430074,China;2.National Lab.for Optoelcctronics,Huazhong Uniersity of Science and Technology,Wuhan 430074,China);STRENGTH AND THERMAL ANALYSIS ON THE DISK EVAPORATOR OF LOOP HEAT PIPE[J];Journal of Engineering Thermophysics;2008-07
8 MENG Run-sheng(Baoding Huiyang Aviation Propeller Factory,Baoding 072152 China);Improvement in fatigue property of helicopter tail rotor[J];Hi-tech Fiber & Application;2005-05
9 LI Xiao-lu,JIANG Yue-song,HE Yu-tao (School of Electron Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Principle of real-time measurement of deformation on the wing by using two-laser range[J];Optical Technique;2006-03
10 Lü Shuqing(Harbin Commercial College);APPLICATION OF HEAT STORING METHODIN CONCRETE CONSTRUCTION DURING WINTER[J];Natural Science Journal of Harbin Normal University;2002-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved