Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Iron & Steel》 2006-10
Add to Favorite Get Latest Update

FE Simulation of Rough Rolling of GCr15 Steel Rod and Wire by Implicit Static Method and Implicit Dynamic Method

ZHANG Li-wen~1,LI Mao~1,LIAO Shu-lun~1,ZHEN Yu~2,GUO Shu-qi~2(1.School of Materials Science and Engineering,Dalian University of Technology,Dalian 116023,Liaoning,China;2.Northeast Special Steel Group,Dalian 116031,Liaoning,China)  
The implicit static and implicit dynamic methods were used to simulate the rough rolling process of GCr15 rod and wire using the commercial FEM software MSC.Marc.The actual parameters of production line were used in the two FEM models.The speed at exit,temperature distribution and average rolling force simulated by implicit static method was in good agreement with that simulated by implicit dynamic method.The reliability of the two models was testified by comparison between simulated and measured temperature distribution. The implicit dynamic method has higher efficiency than the implicit static method due to less computation time.
【Fund】: 大连市优秀青年科技人才基金项目(2001-122);;
【CateGory Index】: TG335.6
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 5 Hits
1 LIU Li zhong, LIU Xiang hua, WANG Guo dong (State Key Laboratory of Rolling and Automation, Northeastern University,Shenyang 110004,China);Simulation on the Strip Rolling by Dynamic Explicit FEM[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2001-03
2 HONG Huiping KANG Yonglin (University of Science and Technology Beijing) FENG Changtao CHEN Xiqiang HAN Chou (Baoshan Iron and Steel Co., Ltd.);3-D THERMO-MECHANICAL COUPLED SIMULATION FOR CONTINUOUS ROLLING OF LARGE ALLOY STEEL ROUND BAR[J];Iron and Steel;2002-10
3 XIE Hongbiao,XIAO Hong,ZHANG Guomin,LIU Jicheng(Yanshan University, Qinhuangdao 066004, China);Analysis on Rolling Pressure Distribution of Strip with Different Reductions by Explicit Dynamic FEM[J];Journal of Iron and Steel Research;2002-06
4 LI Jian\|chao 1 CUI Jian\|zhong 4 (Key Laboratory of National Educational Ministry For Electromagnetic processing of Materials,Northeastern University,Shenyang Shenyang 110004) WU Di 2 ZHAO Xian\|ming 3 (State Key laboratory of Rolling and Automation of Northeastern University,Shenyang 110004);Simulation of billet rolling in oval roll-profile by FEM[J];Journal of Plasticity Engineering;2003-01
5 Liao Shulun, Yu Yongsi, Zhang Liwen, Yuan Siyu and Jiang Guodong(Department of Materials Engineering, Dalian University Technology, Dalian 116023)Zeng Yu and Guo Shuqi(Liaoning Special Steel Group Corporation, Dalian 116031);Numerical Simulation of Temperature Field of 304 Stainless Steel Rod and Wire Hot Continuous Rolling[J];Special Steel;2005-03
Chinese Journal Full-text Database 10 Hits
1 Ma Chao,Zhang Guoqiang,Zhao Dehua,He Tianqing,Shang Rong(Cold Rolled Mill of Angang Steel Co.,Ltd.,Anshan 114021,Liaoning,China);Simulation Study on effect of Bending Roller on Strip Shape[J];Angang Technology;2009-05
2 JIANG Xiao-yan,XING Shu-qing,DONG Li-li,MA Yong-lin(Material and Metallurgy School,Inner Mongolia University of Science and Technology,Baotou 014010,China);The influence of tension on the strip steel in cold strip rolling process[J];Journal of Inner Mongolia University of Science and Technology;2011-04
3 LU Lu WANG Fuzhong WANG Zhaoxu(1 Department of Material Science and Chemical Engineering,Tianjin Polytechnic University,Tianjin 300160;Department of Physics,Tianjin Polytechnic University,Tianjin 300160;3 Department of Information Science and Engineering,Bohai University,Jinzhou 121000);Application of Finite Element Method in Metal Plastic Forming[J];Materials Review;2008-06
4 LU Lu1,2,WANG Fuzhong3,WANG Zhaoxu2(1 Department of Materials Science and Engineering,Tianjin Polytechnic University,Tianjin 300160;2 College of Engineering,Bohai University,Jinzhou 121000;3 Department of Physics,Tianjin Polytechnic University,Tianjin 300160);The Algorithm of Finite Element Method with Numerical Simulation of Sheet Metal Forming[J];Materials Review;2011-03
5 YUAN Si-yu~1,ZHANG Li-wen~1,LIAO Shu-lun~1,LI Mao~1,QI Min~1,ZHEN Yu~2,GUO Shu-qi~2(1 Schoolof Materials Science and Engineering Dalian University of Technology,Dalian 116024,Liaoning,China;2 Special Steel Rod and Wire ContinuousRolling Mill Dongbei Special Steel Group Corporation,Dalian 116031,Liaoning,China);Application of Auto-increment Technique in Simulation of Rod and Wire Hot Continuous Rolling[J];Journal of Materials Engineering;2006-S1
6 LIAO Shu-lun1,2,ZHANG Li-wen1,2,YUAN Si-yu1,2,YUE Chong-xiang1,2,GAO Hui-ju3(1.State Key Lab.for Mater.Modif.,Dalian Univ.of Technol.,Dalian 116024,China;2.School of Mater.Sci.and Eng.,Dalian Univ.of Technol.,Dalian 116024,China;3.Dongbei Special Steel Group,Dalian 116031,China);FE simulation of continuous rolling process of GCr15 steel rod and wire[J];Journal of Dalian University of Technology;2007-06
7 SHI Jun1,ZOU Yang2,YU Zhi-wei1 (1. School of Chemistry,Biology and Material,East China Institution of Technology,Fuzhou 344000,China; 2. School of Material Science and Engineering,Wuhan University of Technology,Wuhan 430070,China);Explicit kinetic finite element analysis of universal rolling for heavy rail[J];Forging & Stamping Technology;2009-06
8 ZHONG Jiang1, ZHANG Xian1, WANG Yangyu1, HE Yang1, TANG Ming2 (1.The MOE Key Laboratory of Mechanical Manufacture and Automation Zhejiang University of Technology, Hangzhou 310014, Zhejiang China; 2.Ningbo Boiler Flat Bar Plant, Ningbo 315040, Zhejiang China);Numerical Simulation of Flat Steel in Precise Finishing Process[J];China Metal Forming Equipment & Manufacturing Technology;2006-04
9 SHI Xu 1, LI Shanqing 2, LIU Xianghua 1, WANG Guodong 1, XU Jianyong 2 (1.State Key Lab of Rolling and Automation, Northeastern University, Shenyang 110004; 2.Technical Center, Baoshan Iron and Steel Co., Ltd.,Shanghai 201900);FEM Analysis for Steel Strip Deformation in Cold Rolling Process[J];Iron and Steel;2004-11
10 YUAN Si-yu~1,ZHANG Li-wen~1,QI Min~1,ZHEN Yu~2,GUO Shu-qi~2(1.Department of Material Engineering,Dalian University of Technology,Dalian 116023,China;2.Rod and Wire Continuous Rolling Mill,Dongbei Special Steel Group,Dalian 116031,China);Application of Pushing Model in Simulation of Wire and Rod Rolling Process[J];Iron and Steel;2005-12
China Proceedings of conference Full-text Database 4 Hits
1 CAO Jian-guo1,WANG Yan-lin1,ZHANG Jie1,SONG Mu-qing2,JIA Sheng-hui2,GONG Gui-liang2(1.National Engineering Research Center of Flat Rolling Equipment,School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083,China;2.Wuhan Iron & Steel(Group) Corp.,Wuhan 430083,China);Sudy on the Shifting Model of Edge Drop Control in Ultra-Wide 6-high Tandem Cold Rolling Mill[A];[C];2011
2 ZHENG Li-juan,ZHANG Shuai,FU Yu-ming,ZHANG Jin-sen,ZHANG Hao-jie(School of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,China);ANALYSIS ON COUPLED THERMAL-MECHANICAL OF MANDREL DURING HOT ROLLING PROCESS OF SEAMLESS STEEL PIPE[A];[C];2012
3 ;棒材切分工艺轧制过程仿真分析[A];[C];2008
4 Ma Chao He Tianqing Shang Rong (Cold Roll Workshop of Ansteel,Anshan,114021);Studies on Numerical Simulation of the Inflections of Bending Force for Strip Profile in Cold Rolling[A];[C];2009
Chinese Journal Full-text Database 10 Hits
1 PENG Xing-dong,LI Sheng-li(School of Materials Science and Engineering,University of Science and Technology Liaoning,Anshan 114051,China);Finite element analysis on front end bending during heavy plate rolling[J];Journal of Anshan University of Science and Technology;2006-06
2 GUO Yang, SONG Yong_zeng, ZHEN Zi_jian (College of Mechanical, Electronic and Control Engineering, Northern Jiaotong University, Beijing 100044,China);Establishment of 3D Standard Part Library of Diesel Locomotive Based on Pro/Engineer[J];Journal of Northern Jiaotong University;2002-01
3 Dou Xaiofeng; Lu Shouli; Zhao Hui(Material Science and Engeering School, UST Biejing,Bejing 100083, China);Static Recrystallization Models of Q235 Low Carbon Steel[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1999-01
4 Hu Haiping; Sun Jixian; Zhu Weichang; Liu Yazheng(Material Science and Engineering UST Beijing, Beijing 100083, China);Deformation Simulation of 3-Roll Rolling with Finite Element Method and Visual-plasticity Approach[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1999-04
5 Ma Dangxian, MU Zhichun, WANG Shaobo, WANG ChangsongMechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, ChinaInformation Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Application of CBR and KDD techniques to modeling plate rolling schedules[J];Journal of University of Science and Technology Beijing;2005-01
6 Jiahe Ai, Huiju Gao, Tongchun Zhao, Xishan Xie, and Yu Liu Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, China Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China Department of Powder Metallurgy, Advanced Technology & Materials Co. Ltd, Beijing 100081, China Iron & Steel Technological Center, Liaoning Special Steel (Group) Co. Ltd, Dalian 116031, China;3-D thermo-mechanical coupled FEM simulation of continuous hot rolling process of 60SiMnA spring steel bars and rods[J];北京科技大学学报(英文版);2004-04
7 Wang Baofeng;Ma yonglin;Li Ruchen;Zhang Liguang;Zhang Zhongyi;Zhang Yulin Baotou Institute of Iron and Steel Technology The Wire Plant of the Iron and Steel and Rare Earth Company of Baotou;THE DEVELOPMENT OF THE COMPUTER AID ROLL PASS DESIGN SYSTEM FOR BAR PRODUCTION[J];Journal of Baotou University fo Iron and Steel Technology;1992-02
8 (Zhang Guomin), (Xiao Hong),(Xie Hongbiao),(Liu Jicheng), (The College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004);Analysis of Strip Rolling Pressure Distribution by Explicit Dynamic FEM[J];Journal of Yanshan University;2003-02
9 Liu Shihao,Wang Dongfang,Su Xiaoping,Tang Shaohua (Nanjing University of Technology,Nanjing 210009,China);The Research of Simulation of the Stamping Form Process and Spring back for Automotive Body Panels Based on Dynaform[J];Electromachining & Mould;2007-06
10 Yanshan University Zhang Liling;Calculation of springback in pipe bending[J];Forging & Stamping Technology;2002-03
【Secondary References】
Chinese Journal Full-text Database 7 Hits
1 OUYANG Kun1,YAO Bin1,LU Jie1,XIONG Xiong1,LI Xiao-hui2(1.School of Physics and Mechanical & Electrical Engineering,Xiamen University,Xiamen 361005,China; 2.Googol Technology(Shenzhen) Ltd.,Shenzhen 518000,China);Research on planar spiral wire forming technology[J];Forging & Stamping Technology;2013-04
2 Ye Peng;Mao Hanying;Huang Zhenfeng;Mao Hanling;School of Mechanical Engineering,Guangxi University;Automotive Department,Guangxi University of Science and Technology;;Process calculation and simulation analysis of butt welding ring by rolling bar with five-roller[J];Forging & Stamping Technology;2014-10
3 Wang Mengmeng;Yao Bin;Shen Zhihuang;Ouyang Kun;Lu Jie;Feng Wei;Zhang Dongsheng;Department of Mechanical and Electrical Engineering,Xiamen University;School of Mechanical Engineering,Shanxi University of Technology;;Analysis and compensation of the springback of metal wire bending[J];Forging & Stamping Technology;2014-12
4 FU Yao,XIE Shui-sheng,HUANG Guo-jie,CHENG Lei(State Key Laboratory of Non-ferrous Metals Preparation and Processing,General Research Institute for Non-ferrous Metals, Beijing 100088,China);Snake Rolling of Extra-thick Plate with High Strength and Toughness[J];Aluminium Fabrication;2012-02
5 MA Cun-qiang;HOU Long-gang;ZHANG Ji-shan;ZHUANG Lin-zhong;State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing;;Numerical study on warp defects of aluminum alloy sheets during the asymmetric rolling[J];Journal of Plasticity Engineering;2014-01
6 ZHENG Xizhao;WU Yunxin;ZHANG Tao;GONG Hai;College of Mechanical and Electrical Engineering,Central South University;State Key Laboratory of High Performance Complex Manufacturing;;Effect of Dragon Rolling Parameters on Shear Deformation in Center of Aluminum Alloy Thick Plate[J];Hot Working Technology;2014-11
7 JIANG Shaosong;WU Yunxin;GONG Hai;ZHENG Xizhao;ZHANG Tao;College of Mechanical and Electrical Engineering, Central South University;State Key Laboratory of High Performance Complex Manufacturing;;Research on Temperature Asymmetry Field of Snake Rolling of Aluminum Alloy Thick Plate[J];Hot Working Technology;2015-03
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 WANG Yan wen 1, KANG Yong lin 1, REN Xue ping 1, YU Zhi yong 1, YUAN Da huan 2 (1. University of Science and Technology Beijing, Beijing 100083, China; 2. Daye Special Steel Co. Huangshi 435001, China);3D FE simulation of workpiece deformation in the 4 pass bar continuous rolling process[J];MATERIAL SCIENCE AND TECHNOLOGY;1999-S1
2 Xiong Shangwu,L Cheng,Liu Xianghua,Wang Guodong (State Key Laboratory of Rolling and Automation,Northeastern University, Shenyang 110006,China);Simulation of Unsteady State Edging Process by Full Three Dimensional Rigid Plastic Finite Element Method[J];JOURNAL OF NORTHEASTERN UNIVERSITY;1999-06
3 LIU Li zhong, LIU Xiang hua, WANG Guo dong (State Key Laboratory of Rolling and Automation, Northeastern University,Shenyang 110004,China);Simulation on the Strip Rolling by Dynamic Explicit FEM[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2001-03
4 Liu Cai;Simulation of Rolling by Elastic-Plastic Finite-Element Me thod[J];;1987-03
5 WANG Yanwen KANG Yonglin YU Zhiyong (University of Science and Technology Beijing) YUAN Dahuan CHEN Yuenan WANG Guofu (Daye Special Steel Co., Ltd.);THREE DIMENSIONAL FEM SIMULATION OF SQUARE BILLET ROLLING IN BOX ROLL PROFILE[J];IRON AND STEEL;2000-02
6 He Chunyu, Li Jianchao, Zhao Xianming, Wu Di;Analysis on temperature field of rolling process of high speed wire[J];Gold Journal;2001-02
8 LIU Li-zhong\ LIU Xiang-hua\ JIANG Zheng-yi (State Key Lab of Rolling and Automation,Northeastern University,Shenyang\ 110006);STRIP ROLLING SIMULATION BY THE DYNAMIC EXPLICIT FEM[J];Journal of Plasticity Engineering;2001-01
9 LIU Li zhong LIU Xiang hua ZHOU Xu dong WANG Guo dong (The State Key Lab of Rolling and Automation,Northeastern University 110006)\;;SIMULATION ON THE UNSTEADY DEFORMATION OF SLAB ROLLING IN THE BITE STAGE[J];Journal of Plasticity Engineering;2001-03
10 LIU Li zhong ZHANG Ming yi LIU Xiang hua WANG Guo dong (Northeastern University Shenyang 110006);FINITE ELEMENT SIMULATION OF ROLLING PROCESS BY STATIC IMPLICIT METHOD AND DYNAMIC EXPLICIT METHOD[J];Journal of Plasticity Engineering;2001-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved