Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Construction Machinery and Equipment》 2009-08
Add to Favorite Get Latest Update

Remanufacturing of Construction Machinery and Its Key Technologies

Construction machinery is an important remanufacturing target due to its large volume and wide covering. Remanufacturing is the industrialized repair and modification for obsolete or used products and it is developed from repairing engineering and surface engineering. Remanufacturing focuses on the used or obsolete stage of a product and brings new life to the product, which features obvious energy-saving and emission-reducing effect. Through the development of various advanced surface engineering technologies, such as nanometer surface engineering technology and automatic surface engineering technology, abundant technical support is provided for remanufacturing. New trends of remanufacturing home and abroad is described. Remanufacturing industry shows rapid development in China and there arc also broad international information exchange and collaboration. China has become one of world remanufacturing centers.
【Fund】: 国家自然科学基金重点项目(50735006);; 国家“973”计划项目(2007CB607601);; 国家“863”计划项目(2007AA04Z408);; 国家科技支撑项目(2008BAK42B03)
【CateGory Index】: F426.4
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 GUO Qi;LI Fangyi;YAO Shuaishuai;NIE Yanyan;JIA Xiujie;LI Jianfeng;Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education,Mechanical Engineering School, Shandong University;;Decoating technology and process optimization of blank HT250 based on remanufacturing[J];中南大学学报(自然科学版);2016-01
2 Wang Fulin;Li Qi;Wu Bo;Huang Xiangming;College of Mechanical and Vehicle Engineering,Hunan University;;Simulation and optimization of the disassembly line of the excavator's hydraulic cylinder[J];现代制造工程;2015-09
3 ZHANG Bi-qiang;QIN Xun-peng;FANG Zhou;NI Chen;School of Automotive Engineering,Wuhan University of Technology;Hubei Key Laboratory of Advanced Technology for Automotive Components,Wuhan University of Technology;School of Materials Science and Engineering,Wuhan University of Technology;;Research on Automatic Non-destructive Testing System of Automobile Engine Block[J];组合机床与自动化加工技术;2015-07
4 WANG Guo-an;GAO Ling;ZHU Kun-peng;ZHANG Li;College of Mechanical Engineering, Guangxi University of Science and Technology;Liu Gong Machinery Co., Ltd.;;Technical feasibility analysis for remanufacturing technology of hydraulic cylinder[J];广西科技大学学报;2015-01
5 Bin-shi Xu;Pei-jing Shi;Han-dong Zheng;En-zhong Li;National Priority Laboratory for Remanufacturing;School of Management,Hefei University of Technology;;Engineering Management Problems of Remanufacturing Industry[J];Frontiers of Engineering Management;2015-01
6 HUANG Da-ming;JIANG Dai-xiang;LI Yue-peng;YANG Chun-lan;College of Mechanical Engineering,Guangxi University;Guangxi Liugong Machinery Co.,Ltd;;Technical feasibility analysis for remanufacturing technology method in hydraulic cylinder based on ANSYS[J];广西大学学报(自然科学版);2013-05
7 WANG Yu-ling1,KONG Yin-xiang2,WU Bao-hua1,CHEN Jia-lu2(1.School of Mechanical Engineering,Qingdao Technological University,Qingdao 266033,China;2.Qingte Group Limited Corporation,Qingdao 266106,China);Study on Repair Technology of Loader Pin Based on Remanufacturing[J];机械设计与制造;2012-12
8 WANG Chun-ying,ZHANG Rui,YANG Ji-long,YI Yan,YANG Xiao-dong;Application of surface engineering technology on construction machinery[J];建筑机械;2012-21
9 ;浅谈工程机械的绿色维修技术[J];科技视界;2012-28
10 WANG Yu-ling 1,KONG Yin-xiang 1,WU Bao-hua 1,CHEN Jia-lu 2(1 School of Mechanical Engineering,Qingdao Technological University,Qingdao 266033,China)(2 Qingte Group Limited Corporation,Qingdao 266106,China);Evaluation of remanufacturing for mechanical products based on the whole life cycle[J];机械设计与制造;2012-06
China Proceedings of conference Full-text Database 1 Hits
1 Ding Jiawei l;Ding Gang;Qiu Xiaoming;College.of materials science and engineering,jilin university;Danyang HengQing composed materials and science Co.,Ltd;;Study on New Induction Electroslag Composite Manufacturing/Remanufacturing Process of Waste Roller Base on Electroslag Refining[A];[C];2015
【Citations】
Chinese Journal Full-text Database 2 Hits
1 XU Bin-shi(National Defense Key Laboratory for Remanufacturing Technology,Academy of Armored Force Engineering,Beijing 100072,China);Developing Remanufacturing Engineering and Realizing Energy-saving and Discharge-reducing[J];装甲兵工程学院学报;2007-05
2 XU Bin-shi ZHANG Wei LIU Shi-can MA Shi-ning XU Yi (National Key Laboratory For Remanufacturing Armored of Force Engineering,Beijing 100072);Smart Self-repairing Technology for Modern Equipment[J];中国表面工程;2004-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHU Ning;Zhejiang Economic Information Center;;Accelerate remanufacturing industry to boost the transformation and upgrading of industrial structure——Taking Zhejiang province as an example[J];再生资源与循环经济;2014-09
2 MO Xiao-jun;Guangxi City Southern Guangxi Nanning Vehicle Inspection Co.,Ltd.;;The Automotive Remanufacturing Engineering Technology and Process[J];装备制造技术;2014-05
3 LI Chang-qing;MA Shi-ning;Department of Equipment Maintenance and Remanufacturing,Academy of Armored Force Engineering;;Research on the Technology System of Equipments Maintenance[J];中国表面工程;2013-05
4 MA Hongling,XIAO Zhou,HOU Genliang,SU Xunjia,YING Jun(Section 501,The Second Artillery Engineering University,Xi'an 710025);Preparation of Nano-sized Hydroxyl Magnesium Silicate by a Reverse Microemulsion Method[J];材料导报;2012-S2
5 LI Ming,ZHU De-mi(School of Economics and Management,Tongji University,Shanghai 200092,China);Research on Collaborative Solution to Market Failures of Remanufacturing[J];华东经济管理;2012-10
6 ZHA Senlin1, WANG Dongsheng2 1Xinqiao Mining Company of Tongling Chemical Industry Group Co.,Ltd.,Tongling 244000,Anhui,China 2Dept.of Mechanical Engineering,Tongling University;Discussion on current status of domestic mining machinery remanufacturing[J];矿山机械;2012-03
7 ZHOU Juan-juan,ZHANG Guang-ming,YUAN Yu-hao(Institute of Automation and Electrical Engineering,Nanjing University of Technology,Nanjing 211816,China);Study of fault self-healing system for wind turbine based on immune-agent[J];机械设计与制造;2012-03
8 QIU Hui-juan,ZHANG Guang-ming(School of Electrical Engineering and Automation,Nanjing University of Technology,Nanjing 211816,China);Modeling of mechanical and electrical self-healing system based on immune Agent[J];计算机工程与设计;2011-10
9 Liu Qian1 Cao Ruilin2 1.Department of Remanufacturing engineering,Academy of Armored Forces Engineering,Beijing 100072 2.66166 General Armament Department of PLA,Tianjin 301915;The Tribological Properties of Lubricants Containing Nano-Cu Additives and functional additive T151[J];中国科技信息;2011-17
10 Tang Jing(Electronic Science and Technology Information Institute,Ministry of Industry and Information Technology,Beijing,100040);Classification of Energy-saving Environmental Protection Industries[J];北方环境;2011-07
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Guo Qi;Li Fangyi;Li Shuo;Nie Yanyan;Key Laboratory of High Efficiency and Clean Mechanical Manufacture,Ministry of Education,Shandong University;;Research on Decontamination Effect and Damage of High-pressure Water Jet Cleaning to Matrix[J];中国机械工程;2014-06
2 LI Su-li;LIU Wei;ZHANG Zhi-min;Shaanxi Institute of Technology;Shanxi Engineering Technology Research Center for Integrated Precision Forming;;Finite element simulation of symmetrical parts multidirectional extrusion technology[J];广西工学院学报;2013-03
3 Wang Can, Zong Xuemci, He Bing;Remanufacturing of Hydraulic Cylinder for Construction Machinery and Its Benefit Analysis[J];工程机械;2013-06
4 WANG Chun-hui,WANG Wei-xiao;ANSYS Based Structure Design for Excavator Hydraulic Cylinder[J];液压与气动;2012-12
5 JI Xiaochao,ZHANG Wei,YU Helong,WEI Min(National Key Laboratory for Remanufacturing,Academy of Armored Forces Engineering,Beijing 100072);Research Progress of the Green Cleaning Technologies in the Remanufacturing of Mechanical and Electrical Products[J];材料导报;2012-S2
6 TU Ming-jing1,OU Zhong-wen2(1.Chongqing University of Arts and Sciences,Chongqing 402160;2.Logistics Engineering University of PLA,Chongqing 401311);Development and Consideration of Surface Engineering[J];中国表面工程;2012-05
7 XU Binshi DONG Shiyun ZHU Sheng SHI Peijing(Science and Technology on Remanufacturing Laboratory,Academy of Armored Forces Engineering, Beijing 100072);Prospects and Developing of Remanufacture Forming Technology[J];机械工程学报;2012-15
8 ZHANG Ru-jie 1,YANG Zi-jian 2,WANG Wei 1,HE Chun 1(1.School of Mechanical Science and Technology,Huazhong University of Science and Technology,Wuhan 430074,China;2.Ningbo Saivs Machinery Co.,Ltd.,Ningbo Zhejiang 315135,China);Application of eM-Plant in Modeling and Logistics Simulation of Locomotive Preliminary Assembly Line[J];装备制造技术;2012-05
9 Zheng Rong Huang Weizhong Xu Feijun Qiu Xiaojiu Liu Lufang(Zhejiang Asia-pacific Mechanical & Electronic Co.,ltd.,Hangzhou 311203,China);Finite Element Analysis of Automobile Disc Brake Assembly based on ANSYS[J];机械传动;2012-05
10 LUO Hai-ping1,PAN Zuo-yun2,TANG Qing-chun1(1.Department of Mechanical Engineering,Guangxi University of Technology,Liuzhou 545006,China; 2.Liuzhou Iron and Steel Group Cold Rolling Plant,Liuzhou 545002,China);Fenite Element Analysis of Hydraulic Cylinder in Coil Downending Machine Based on ANSYS[J];广西工学院学报;2011-03
【Secondary References】
Chinese Journal Full-text Database 7 Hits
1 Song Shouxu;Yan Zichao;Liu Yundong;;The Mapping Relationship between Design Parameters and Service Properties of Product Initiative Remanufacturing[J];机械制造;2015-09
2 ZHAO Jun-hua;DONG Yan;Department of Mechanical and Electrical Engineering,Henan Polytechnic;;Research Progress on the Remanufacture of Failed Mechanical Parts Based on Electroforming Technology[J];电镀与环保;2015-04
3 ZHANG Rui;Shandong Shantui Machinery Co., Ltd.;;The Research of Structure and Process in Shot Blasting Workpiece[J];现代涂料与涂装;2015-07
4 ZHANG Rui;ZHANG Yue-fu;Shandong Shantui Mechanical Ltd.;;Study and solution of the problem about residual shot blasting pills in coating pretreatment process for engine hood[J];电镀与涂饰;2015-06
5 WANG Xiao-chun;WEI Qian;JIANG Lian-qiong;WANG Jun-yang;College of Mechanical Engineering,Guangxi University;;Research on sawing process of hedge branches based on LS-DYNA[J];广西大学学报(自然科学版);2014-05
6 Jiang Weichun;;Discuss the Maintenance Technology of Engineering Machinery[J];城市建筑;2013-24
7 Zhao Jingju;Liu Ruijun;Shi Dapai;Zhang Jian;Li Xiubo;School of Transportation and Vehicle Engineering,Shandong University of Technology;Traffic Advanced Technical School of Jinan;Zhucheng Yihe Axles Ltd.;;Model Research on Engine Reproducing Based on Life Cycle[J];农业装备与车辆工程;2014-01
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 Xu Binshi Liu Shican Liang Xiubing (The Academy of Armored Forces Engineering);PROGRESS AND PROSPECT OF NANO- MATERIALS SURFACE ENGINEERING[J];机械工程学报;2003-10
2 Xu Binshi Liang Xiubing Ma Shining Liu Shican Qiao Yulin Zhu Sheng;Evolution of Nano-surface Engineering Technology[J];中国表面工程;2001-03
3 XU Bingshi LI Renhan LIANG Xiubing;Progress of Green Remanufacture Engineering[J];中国表面工程;2001-02
4 Tao Baoqi, Liang Dakai, Xiong Ke, Yuan Shenfang (Research Institute of Smart Material and Structure, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016);STUDY ON SELF DIAGNOSIS AND SELF REPAIR FUNCTION OF SHAPE MEMORY ALLOY ENHANCED COMPOSITE STRUCTURE[J];航空学报;1998-02
Similar Journals
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved