Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Mechanics》 2011-09
Add to Favorite Get Latest Update


HUANG Hua-gui1,DU Feng-shan1,2,XU Zhi-qiang1(1.College of Mechanical Engineering,Yanshan University,Qinhuangdao,Hebei 066004,China; 2.Laboratory of Metastable Materials Science & Technology,Yanshan University,Qinhuangdao,Hebei 066004,China)  
The porosity defects in the heavy ingot can be treated as compressible material due to their similar physical property and deformation characteristics.Aiming at the forging process of large Cr5 typed steel backup roller,the paper established a non-linear FEA model for compacion process of porosity defects by means of the rigid-plastic finite element method for compressible material.From the numerical simulation results,the influence of the initial porousity,tool width ratio,contact friction coefficient and reduction on the defects collapse was disccussed.By preparing artificial porosity defects which sinter the deoxidized ferrous powder inside a cylinder sample,the forging experiment was carried out on the platform of Gleeble-3500.And the numerical simulation results were verified by the experiment through metallographic observation and compaction analysis of the porosity defects.The research conclusions provide a theoretical foundation for designing and optimizing the forging technology parameters.
【Fund】: 国家自然科学基金重点项目(50435010);; 国家“十一五”科技支撑计划项目(2007BAF02B12);; 燕山大学博士基金项目(B298)
【CateGory Index】: TG316.192
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 4 Hits
1 Guo Ruiping1, Liu Guanting2, Fan Tianyou3 (1. Academy of Equipment Command and Technology, Beijing 101416, China) (2. Inner Mongolia Normal University, Huhhot 010022, China) (3. Beijing Institute of Technology, Beijing 100081, China);Review of Compressible Plasticity Mechanics in Metal Foams[J];Rare Metal Materials and Engineering;2009-S3
2 Ren Yunlai Nie Shaomin Chen Ying (Yanshan University)Duan X (Bournemouth University UK);STUDY ON POROSITY COLLAPSE FACTOR OF LARGE FORGING[J];Chinese Journal of Mechanical Engineering;2003-03
3 ZHOU Ming-zhi LI Ping XUE Ke-min (School of Material Science and Engineer,Hefei University of Technology,Hefei 230009 China);Coupled thermo-mechanical FEM analysis of the sintered powder during upsetting process[J];Journal of Plasticity Engineering;2005-06
4 YUAN Chao-long ZHONG Yue-xian(Department of Mechanical Engineering,Key lab of AMMPT,Tsinghua University,Beijing 100084 China);Self-healing mechanism of inner crack in plastic deformation under high temperature[J];Journal of Plasticity Engineering;2006-01
Chinese Journal Full-text Database 10 Hits
1 Jiang Xianquan Zhang Xiujin Zhang Xinmin(Sichuan Provincial Matall. Research Institute Chengdu 610081Central South University of Technology Changsha 410083);Influence of Hot - Rolling Temperature on Mechanical Properties and Microstures of Ironing-Can 3004H_19[J];Sichuan Nonferrous Metals;1999-03
2 PENG Mao-gong 1, KANG Ro-gu 2, WANG Yun-kun 1, ZHANG Jia-min 1, LIOU Ke-cheng 2 (1.Kunming Metallurgy Research Institute, Kunming 650031, China; 2.Kunming Metallurgy Research & New Material Co.Ltd, Kunming 650031, China);Study of forgeability of dispersion-strengthened copper material with high strength and high conductivity[J];Ordnance Material Science and Engineering;2003-01
3 Jing Zuojun; Ma Manhua (Department of Educational Administration, North China Univ. of Tech., 100041, Beijing, China);Three-Dimensional Upper-Bound Method Analysis for Periodic Section π Shape Rolling[J];Journal of North China University of Technology;1996-03
4 SHI Guo-quan,LIU Meng,SHI Guang-feng,SONG Lin-sen(College of Mechanical and Electric Engineering,Changchun University of Science and Technology,Changchun 130022,China);Numerical simulation research on metal flow law in the process of the diffraction grating carving with extension pyramidal graver[J];Journal of Changchun University;2011-02
5 ZHANG Tao,ZHAO Bei-jun,ZHU Shi-fu,LI Kai,YONG Zhi-hua(Department of Material Science,Sichuan University,Chengdu 610064,China);Numerical Simulation Study of PBX Powder-forming[J];Journal of Materials Engineering;2009-05
6 LIU Fang, SHAN Debin, LU Yan(School of Materials Science and Engineering, Harbin Institute of Technology,Harbin 150001,China);Influence of thermo-deformation parameters on the flow stress of LD7 aluminum alloy[J];Material Science and Technology;2003-01
7 LI Jin-ping ,MENG Song-he ,HAN Jie-cai ,LUO Shou-jing ( Center for Composite Materials and Structure, Harbin Institute of Technology, Harbin 150001,China; Dept. of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China);Relationships of explosive press and powder density during explosive compaction[J];Material Science and Technology;2005-04
8 LI Mao-sheng, ZHANG Shi-hong, KANG Da-chang, YAN Yong-nian ( Dept. of Mechanical Engineering, Tsinghua University, Beijing 100084, China, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China; School of Materials Science & Engineering, Harbin Institute of Technology, Harbin 150001 , China);Study on selecting ball diameter in ball spinning[J];Materials Science and Technology;2005-06
9 XIAO Yu-de,TAN Dun-qiang,LI Wen-xian,MA Zheng-qing,WANG Ri-chu(College of Materials Science and Engineering,Central-South University,Changsha 410083 China);Experimental investigation on forge forming process of spray deposited blanks of rapidly solidified AlFeX heat-resistant aluminum alloy[J];Materials Science and Technology;2006-05
10 Li Baoxun(Luoyang Ship Material Research Institute);Effect of Hot Forming on the Properfies and Microstructure of Ti-31 Alloy[J];DEVELOPMENT AND APPLICATION OF MATERIALS;1996-06
China Proceedings of conference Full-text Database 4 Hits
1 Wei Ding, Mi Guangbao, Xue Kemin, Zhou Mingzhi (School of Materials Science and Engineering, HeFei University of Technology 230009);The Extrusion Die Design of Cup-bar Component and The Preliminary Analysis with Finite Element Numerical Simulation[A];[C];2005
2 ZHAO Jun~1 MA Shi-bo~1 MA Jin~2 (1.College of Mechanical Engineering,Yanshan University,Qinhua ngdao 066004,China 2.Yanshan University HengYuan Hi-Tech Co.LTD,Qi nhuangdao 066004 China);Research on Precise Warm Extrusion of Pick Used in Engineering and Mining[A];[C];2009
3 He ShengchunO Zhang Tiancang Guo Delun (Beijing Aeronautical Manufacturing Technology Research Institute,Beijing 100024,China);Microstructure Analysis of P/M Superalloy FGH4096 Inertia Friction Welding Joint[A];[C];2007
4 YUAN Xiao-bo, ZHANG Jun-liang, LI Zhong-kui, ZHENG Xin, ZHANG Xiao-ming, ZHOU Jun, FU Jie, ZHANG Ting-jie (Northwest Institute for Non-ferrous Metal Research, Xi'an 710016, China);Thermal simulation deformation resistance of a new Ni-based electric resistance alloy[A];[C];2005
【Secondary Citations】
Chinese Journal Full-text Database 6 Hits
1 Ren Xueping (University of Science and Technology, Beijing 100083, China) Wang Erde and Huo Wencan (Harbin Institute of Technology, Harbin 150006,China);THE YIELD CRITERION OF POWDER COMPACT[J];Powder Metallurgy Technology;1992-01
2 MA Qingxian, ZHONG Yuexian, CAO Qixiang Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China;Principle of internal defects recovery in processes of high temperature plastic deformation[J];JOURNAL OF TSINGHUA UNIVERSITY(SCIENCE AND TECHNOLOGY);1999-11
3 LUO Wen bo (Department of Mechanics,Huazhong University of Science and Technology,Wuhan,Hubei 430074) HU Yun gui Hu Zi hua GUO Yan ling PENG Yan rong (Department of Mechanical Engineering,Xiangtan University,Xiangtan,Hunan 411105);THERMOME CHANICAL ANALYSIS OF UPSETTING OF CYLINDRICAL BILLET BETWEEN ROUGH PLATE DIES[J];JOURNAL OF PLASTICITY ENGINEERING;2000-01
4 YUAN Chao\|long ZHONG Yue\|xian MA Qing\|xian (Department of Mechanical Engineering,Tsinghua University,Beijing 100084);Self-recovering process of cavity-type inner fault in materials[J];Journal of Plasticity Engineering;2002-02
5 Yuan Chaolong (Ts- inghua University .Beijing, China) Zhong Yuexian Ma Qingxian;Tiny Particular Effect in Crack Self - Recovering Pro- cesses of Plastic Deformation[J];China Mechanical Engineering;2003-11
6 LI Ping 1, 2, XUE Ke-min 2, L*B Yan 2, TAN Jian-rong 1 (1. College of Mechanical and Energy Engineering, Zhejiang University, Hangzhou 310027, China; 2. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001,;Numerical simulation of coupled thermo-mechanical behavior of Ti-15-3 alloy during back-extrusion[J];The Chinese Journal of Nonferrous Metals;2002-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved