Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Mechanics》 2014-06
Add to Favorite Get Latest Update


HUANG Yong-hui;WANG Rong-hui;FU Ji-yang;GAN Quan;Research Center for Structural Safety and Heath Monitoring of Guangdong Education Department /Guangzhou Municipal Key Laboratory for Structural Safety and Health Monitoring,Guangzhou University;School of Civil Engineering and Transportation,South China University of Technology;  
In order to investigate the influence of different welding parameters on the residual stress of a flat plate welding joint, based on the ANSYS software, a lot of 3D thermal elastic-plastic finite element models are developed to simulate the transient temperature and the residual stress fields during welding. According to the numerical simulation results, the calculation formula for the half width of a tension zone is modified by considering the effects of various welding parameters, the number of welding beads and heat flux distribution coefficients of the plate. And then, the estimation formula to predict the longitudinal residual stress is fitted as an exponential function using the modified half width of the tension zone. Lastly, several welding joints are fabricated, and the value and law of the welding residual stress are measured with a hole-drilling strain-gages method. The calculated results using the modified estimation formula are compared with those of measured ones and the comparison shows a good agreement, which verified the accuracy of the modified estimation formula for calculating the residual stress.
【Fund】: 国家自然科学基金项目(51208123 51208229);; 住建部科技计划项目(K2201217);; 广州市属高校科研计划项目(2012A032);; 广东省自然科学基金重点项目(S2011030002800)
【CateGory Index】: TG404
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved