Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Opto-Electronic Engineering》 2012-10
Add to Favorite Get Latest Update

Detection Method for Tool Setting Gap of Small Lathe

YU Zhan-jiang,WANG Jing-dong,ZHANG Liu-xin,WANG Li-meng,YU Hua-dong,XU Jin-kai(Institute of Guidance and Countermeasure Technology,ChangChun University of Science and Technology,Changchun 130022,China)  
A two-dimensional device of gap detection in tool-setting is designed,which is applied to a small lathe.A way of orthogonal layout is used to construct an optical measurement system,and a gap detection system of tool-setting is established based on image processing.The optical system is calibrated precisely by using standard gauge blocks and applied to measure the micro gap of tool setting.The inspection system is installed on the small lathe developed independently.The system verification is done through motion stage of lathe applying micro displacement.The results show that:the detection algorithm can recognize and detect the gap of tool-setting in small lathe fast and effectively.Moreover,the detection precision can reach 15 m.The correctness of detection algorithm for small lathe is verified experimentally for high-precision tool setting of small lathe.
【Fund】: 国防基础科研项目
【CateGory Index】: TG51
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 10 Hits
1 YU Huadong (Changchun University of Science and Technology,Changchun 130022);Development of Ultra-precision Micro-machining Technology[J];Journal of Changchun University of Science and Technology(Natural Science Edition);2008-03
2 WANG Bing-zhen,LIU Wen-yao (Key Laboratory of Optoelectronics Information Technical Science, EMC Collage of Precision Instrument and Opto-Electronics Engineering, Tianjin University, Tianjin 300072, China );Camera calibration method for micro-image measuring system[J];Opto-Electronic Engineering;2006-02
3 SUN Chun-sheng,ZHANG Xiao-hui,HAN Hong-wei(Department of Weaponry Engineering,Naval University of Engineering,Wuhan 430033,China);Image Proceeding of Micro-bubbles' Size Distribution in Water[J];Opto-Electronic Engineering;2012-01
4 LIN Hong-bina,b,LIU Bina,ZHANG Yu-cuna(a.Inisitute of Electrical Engineering; b.Key Laboratory of Measurement Technoloty and Instrumentation of Hebei Province, Yanshan University,Qinhuangdao 066004,Hebei Province,China);Self-calibration of Single Camera System Used in Cylinder-shaped Forging Parts Measurement[J];Opto-Electronic Engineering;2012-03
5 ZHANG Wu-jie,YANG Yi-lu,LI Di,YE Feng(College of Mechanical Engineering,South China University of Technology,Guangzhou 510641,China);Key algorithms of automatic image measurement system[J];Optics and Precision Engineering;2007-02
6 FAN Chongjian, SHEN Hongyuan, LIN Tao, CHEN Shanben (School of Materials Science and Engineering, Shanghai Jiaotong University, Shanghai 200240, China).;Welding direction and gap image processing in aluminum alloy GTAW[J];Transactions of the China Welding Institution;2008-08
7 REN Wei,KONG Jinxing,HAN Changqing (Institute of Mechanical Manufacturing Technology,CAEP,Mianyang Sichuan 621900,China);A Method of Precised Tool Alignment in Ultra-precision Turning[J];Machine Tool & Hydraulics;2010-16
8 YUE Wuling WU Yong ( College of Mechanical Engineering, Nantong University, Nantong 226007 );Fast and Accurate Evaluation of the Roundness Error Based on Quasi-incremental Algorithm[J];Chinese Journal of Mechanical Engineering;2008-01
9 WANG Wei 1\ WANG Wen\|ping 2\ WANG Jia\|ye 3 1(Department of Computer Science\ Fudan University\ Shanghai\ 200433) 2(Department of Computer Science\ The University of Hong Kong\ Hong Kong) 3(Department of Computer Science\ Shandong U;An Algorithm for Finding the Smallest Circle Containing all Points in a Given Point Set[J];JOURNAL OF SOFTWARE;2000-09
10 FENG En-juan,KANG Min,FU Xiu-qing,YANG Yong (College of Engineering,Nanjing Agricultural University,Nanjing 210031,China);The measurement of electrochemical turning gap based on machine vision[J];Modern Manufacturing Engineering;2010-04
Chinese Journal Full-text Database 10 Hits
1 CUI Yan-ping1,2,GE Xing-wei1(1.School of Mechanical and Electronic Engineering,Hebei University of Science and Technology,Shijiazhuang 050054,CHN;2.State Key Laboratory of Precision Measuring Technology and Instruments,Tianjin University,Tianjin 300072,CHN);Study on 3-D Reconstruction of Spatial Beeline Based on Binocular Vision[J];Semiconductor Optoelectronics;2009-06
2 LI Xiao-zhou1,YU Hua-dong1,YU Zhang-jiang1,LIU Yan1,XU Jin-kai1,2(1.School of Mechanical and Electrical Engineering,Changchun University of Science and Technology,Changchun 130022,Jilin,China;2.Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,Jilin,China);Optical Inspection Method for Surface Defects of Micro-components[J];Acta Armamentarii;2011-07
3 HUANG Jian-kang1,LU Li-hui1,LI Wei-dong1,XU Le-sheng2,SHI Yu2,FAN Ding2(1.State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials,Lanzhou University of Technology,Lanzhou 730050,China;2.Key Laboratory of Non-ferrous Metal Alloys and Processing of Ministry of Education,Lanzhou University of Technology,Lanzhou 730050,China);Real-time visual image processing in aluminum alloy pulse MIG welding base on COM[J];Electric Welding Machine;2010-12
4 Li Hongjun1,2,Zhang Xiaopeng2 (1.College of Science,Beijing Forestry University,Beijing 100083,China; 2.NLPR-LIAMA,Institute of Automation,CAS,Beijing 100190,China);Analysis and improvement of smallest enclosing disk algorithm on discrete set of points[J];Journal of Graphics;2012-02
5 CHEN Geng-biao,LE Yun-fei,WU Jian-zhong ( College of Mechanical Engineering, Tongji University, Shanghai 200092, China );Key Algorithm of Measurement System with Digital Level[J];Opto-Electronic Engineering;2008-04
6 LU Sheng-lin,ZHANG Xian-min (School of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China);Analysis and optimal design of illuminator for leadfess tin solder joint inspection[J];Optics and Precision Engineering;2008-08
7 LIU Bing-guo ,LIU Guo-dong ,PU Zhao-bang ,ZHUANG Zhi-Tao ,CHEN Feng-Dong(Department of Automatic Measurement and Control, Harbin Institute of Technology, Harbin 150001, China);Measurement and precision analysis on alignment of laser and target in ICF[J];Optics and Precision Engineering;2009-03
8 LIU Feng-lin, QIAO Gui-feng, Zou Bin(ICT Research Center, Key Laboratory of Opto-electronic Technology and System of the Education Ministry, Chongqing University, Chongqing 400030, China);Precise measurement of circles in industrial computed tomographic images[J];Optics and Precision Engineering;2009-11
9 LI Yuan, RONG Zhi-guo, ZHENG Zhao-jun, LIU Jing-jing, ZHANG Li-jun, ZHANG Li-yang, HU Xiu-qing, ZHANG Yong, SUN Ling(National Satellite Meteorological Center, China Meteorological Administration, Beijing 100081, China);Post launch site calibration of visible and near-infrared channels of FY-3A visible and infrared radiometers[J];Optics and Precision Engineering;2009-12
10 GE Dong-yuan1,2,YAO Xi-fan1,XIANG Wen-Jiang2(1.School of Mechanical & Automotive Engineering,South China University of Technology,Guangzhou 510640,China;2.Department of Mechanical and Energy Engineering,Shaoyang University,Shaoyang 422004,China);Fitting margin projection of micro-drill based onSanger algorithm with lateral connection[J];Optics and Precision Engineering;2011-03
China Proceedings of conference Full-text Database 2 Hits
1 LI Xiuming (College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022);Research on Criterion for Minimum Circumscribed Circle and Maximum Inscribed Circle[A];[C];2008
2 Li Hongjun~(1,2),Zhang Xiaopeng~2 1(College of Science,Beijing Forestry University,Beijing 100083,China) 2(NLPR-LIAMA,Institute of Automation,CAS,Beijing 100190,China);Analysis and improvement of smallest enclosing disk algorithm on discrete set of points[A];[C];2011
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 GUO Qiang-sheng, JIN Wei-guo, ZHOU Qing-ya The 45th Research Institute of CETC, Beijing East Yanjiao, 101601 China;Vision Inspection Technology of IC Die Bonder[J];Equipment For Electronic Products Manufacturing;2005-07
2 Zhang Lin1 Zhao Dongbiao1 Zhang Jianming2 Sun Xueyun2 Pang Changtao2 (1College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China) (2China Precision Engineering Institute for Aircraft Industry,Beijing 100076,China);Development of miniaturized numerical control milling machine tool used in micro-cutting[J];Journal of Southeast University(Natural Science Edition);2007-01
3 ZHANG Tie-ying (Hebei Institute of Architectural Engineering, Zhangjiakou 075024, China) LAI Ke-wei (Tongji University, Shanghai 200092, China);Study on Computational Geometry Approaches to Assessing Roundnes[J];Journal of Engineering Graphics;2002-03
4 YANG Xian-ming , HE Jun-ji , ZHANG Guang-jun , ZHOU Fu-qiang ( Beijing University of Aeronautics and Astronautics, Beijing 100083, China );A method of sub-pixel extraction from circular structured light stripes center[J];Opto-electronic Engineering;2004-04
5 LI Qing , ZHENG Nan-ning , ZHANG Xue-tao ( Institute of Artificial Intelligence and Robotics, Xi'an Jiaotong University, Xi'an 710049, China );Calibration of external parameters of vehicle-mounted camera with trilinear method[J];Opto-electronic Engineering;2004-08
6 SUN Xiang-yang1,2,ZHANG Guo-yu1,3,DUAN Jie1,SU Shi1,LIU Feng1 ( 1. College of Optoelectronic Engineering, Changchun University of Science and Technology, Changchun 130022, China; 2. The School of Electronics and Information Engineering, Changchun University, Changchun 130022, China; 3. Key Laboratory of Optoelectronic Measuring-controlling and Optical Information Transmitting, Ministry of Education, Changchun 130022, China );Optimum Structural Design of Target for Calibration of Space-location Vision Camera[J];Opto-Electronic Engineering;2010-03
7 LIU Gui_xiong, SHEN Bai_hua, FENG Yun_qing, HU Cun_yin, YI Jing_rong (Department of Mechatronic Engineering, South China Univ. of Tech., Guangzhou 510640, China);Study of image segmentation based on improved Hough transform[J];Optics and Precision Engineering;2002-03
8 LIN Yu-chi~1,CUI Yan-ping~(1,2),HUANG Yin-guo~1(1.State Key Laboratory of Precision Measuring Technology and Instrument,Tianjin University,Tianjin 300072,China;2.School of Mechanical and Electronic Engineering,Hebei University of Science and Technology,Shijiazhuang 050054,China);Study on edge detection and target recognition in complex background[J];Optics and Precision Engineering;2006-03
9 ZHAO Yan,LIANG Ying-chun,BAI Qing-shun,WANG Bo,SUN Yazhou,CHEN Ming-jun (Center for Precision Engineering,Harbin Institute of Technology,Harbin 150001,China);Micro-milling machine tool,micro-tool wear and cutting forces in micro-machining[J];Optics and Precision Engineering;2007-06
10 Wu Xiaobo,An Wendou and Yang Gang (Dept.of Automation,Logistic Engineering Institute,Chongqing 630041);Error Analysing and Approaches of Improving Measureing Precision in Image Measuring System[J];OPTICS AND PRECISION ENGINEERING;1997-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved