Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Lanzhou University of Technology》 2014-01
Add to Favorite Get Latest Update

Dynamic performances analysis of a high-speed precision machining center

WANG Fu-qiang;RUI Zhi-yuan;LEI Chun-li;FENG Rui-cheng;College of Mechano-Electronic Engineering,Lanzhou Univ.of Tech.;  
In order to solve a problem which the performances parameters of the linear rolling guideway surfaces were hardly ascertained,an spring-damper equivalent model and an modal test method for linear rolling guideway surfaces were proposed.The performances parameters of linear rolling guideway surfaces were acquired by the test and applied to the finite element model of the machining center.Based on the modal analysis,the finite element model of the machining center was analyzed.The high-speed precision machining center was analyzed by modal test.Compare the results of test and the finite element analysis,it shown that they are coincided basically.The weak points were obtained from the test result,and it laid the foundation for the structural optimal design of the machining center.
【Fund】: 国家科技重大专项(2010ZX04001-032);; 甘肃省自然科学基金(1010RJZA043)
【CateGory Index】: TG50
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 5 Hits
1 JIN Wu-yin,WANG An,YAN Chang-feng(College of Mechano-Electronic Engineering,Lanzhou Univ.of Tech.,Lanzhou 730050,China);Dynamical characteristics of foundation vibration of machine tool[J];Journal of Lanzhou University of Technology;2008-01
2 WU Xiu-hai1,MA Yun-fang1,ZHANG Jian-run2(1.Taizhou Vocational and Technical College,Taizhou318000,China;2.Southeast University,Nanjing210096,China);Dynamic optimization design of a high-speed and high-precision HMC[J];Journal of Vibration and Shock;2009-10
3 Zhang Jianrun~1 Lu Xi~1 Sun Qinghong~1Peng Wen~2Yao Shujian~2 1.Southeast University,Nanjing,2100962.Jiangsu Duoling NC Mechanical Tool Ltd.,Changzhou,213012;Dynamic Optimization Design of 5 Axis Numerical Control Gantry Machining Center[J];China Mechanical Engineering;2005-21
4 GUO Zhiquan①③,HUO Jinhai②,XU Yanshen③(①School of Mechanical Engineering,Tianjin University of Science and Technology,Tianjin 300222,CHN;②Jingcheng Machine Tool Co.,Ltd.,Tianjin 300300,CHN;③School of Mechanical Engineering,Tianjin University,Tianjin 300072,CHN);Structural Dynamic Design of CNC Machine Tool[J];Manufacturing Technology & Machine Tool;2007-08
5 WANG Yu-lin,WU Xiao-feng,FENG Hu-tian (School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China);Static and dynamic characteristics optimization for a whole large-sized thread grinder based on joint surface[J];Journal of Vibration and Shock;2012-20
Chinese Journal Full-text Database 10 Hits
1 MA Bing-jie, FENG Hui-hua, LIAO Ri-dong, YAO Li-min (School of Mechanical & Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Modal Analysis of Engine Structure Based on the Modal Correlation and Model Modification[J];Vehicle & Power Technology;2006-02
2 WU Jun-qing(North University of China, Taiyuan, Shanxi 030051, China);Experiment and Calculation of Vibration Modal of a Military Engine[J];Acta Armamentarii;2005-04
3 CUI Zhiqin,ZHAO Junli (College of Mechatronic Engineering,North University of China,Taiyuan 030051,China);Experiment and Calculation of the Vibration Modes of Engines[J];Journal of Test and Measurement Technology;2007-05
4 TAO Xuan,TANG Jin-yuan,LOU Jiang-lei,TANG Jian-jie(College of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China);Mode analysis and integrated optimization design of a circular sawing machine based on CAD/CAE/CAT[J];Journal of Railway Science and Engineering;2012-03
5 LI Liang1,2,TANG Liu-ding1,DENG Si-er1,3,ZHANG Lei1(1.Henan University of Science & Technology,Luoyang 471003,China;2.Luoyang Bearing Research Institute,Luoyang 471039,China;3.Dalian University of Technology,Dalian 116023,China);Calculation of Vibration Frequency for Rotor System Supported by Angular Contact Ball Bearing[J];Bearing;2007-11
6 ZHANG Yao-man1,LIU Chun-shi2,XIE Zhi-kun1,LIU Yong-xian1 (1.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004,China;2.Shenyang Machine Tool(Group) Co.Ltd.,Shenyang 110041,China.);Dynamic Performances Analysis of NC Machine Tool Considering Linear Rolling Guideway[J];Journal of Northeastern University(Natural Science);2007-11
7 HUA Min-feng,LI Bei-zhi,YANG Jian-guo(College of Mechanical Engineering,Donghua University,Shanghai 201620,China);Dynamic Performance Analysis and Diagnosis for High Speed Cylindrical Grinding Machine[J];Journal of Donghua University(Natural Science);2011-04
8 Yang Mingqing1,2 Sun Qinghong1 Zhang Jianrun1 Zhang Wei1 Liang Jinjuan1(1School of Mechanical Engineering,Southeast University,Nanjing 211189,China)(2School of Mechanical Engineering,Guizhou University,Guizhou 550003,China);Dynamics modeling and optimization of combing machine gearbox structure[J];Journal of Southeast University(Natural Science Edition);2008-04
9 ;Experimental Modal Analysis of Axial-flow Fan Secondary Blade[J];Compressor,Blower & Fan Technology;2011-06
10 YANG Chao-hua~(1,2),RUAN Shi-xun~2(1.Faculty of Electromechanical Engineering,Guangdong University of Technology,Guangzhou 510090,China;2.Department of Mechatronics Engineering,Foshan University,Foshan 528000,China);Dynamic characteristic analysis of the torsional vibrating horn based on ANSYS[J];Journal of Foshan University(Natural Science Edition);2005-04
China Proceedings of conference Full-text Database 1 Hits
1 HAN Xiaobin,LIU Yu (School of Mechatronics,Nanjing University of Aeronautics&Astronautics,Nanjing 210016 China);Optimal design ofπ-type gantry framework based on the ANSYS Workbench[A];[C];2012
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 WANG Ying-shu,Ding Ning(Mechanical Engineering Collage,Changchun University,Changchun*"130022,China);The grinding force model of cylindrical traverse grinding[J];Journal of Changchun University;2005-06
2 SUI Yun-kang , YE Hong-ling , DU Jia-zheng (Numerical Simulation Center for Engineering, Beijing University of Technology, Beijing 100022, China);DEVELOPMENT OF STRUCTURAL TOPOLOGICAL OPTIMIZATION AND IMMINENCY OF ITS MODEL TRANSFORMATION INTO INDEPENDENT LEVEL[J];Engineering Mechanics;2005-S1
3 CHANG Ying-xiang, CHU Yan-dong, ZHANG Jian-gang(School of Mathematics, Physics and Software Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China);Stability and chaos controlling of class of centrifugal flywheel governor[J];;2005-02
4 Sui Yunkang1,Ren Xuchun2,\ Long Lianchun1,Ye Baorui1(1. Beijing Polytechnic University, Beijing 100022, China;2. Tsinghua University, Beijing 100084, China);Topological optimization of frame based on ICM method[J];Chinese Journal of Computational Mechanics;2003-03
5 ZHANG XueLing XU YanShen ZHONG WeiHong (Key Laboratory for Advance Ceramics Processing and Machining Technology of Ministry of Education, Tianjin University, Tianjin 300072,China);RESEARCH ON STRUCTURAL OPTIMIZATION METHOD IN DESIGN OF NC MACHINE TOOL BED BASED ON DYNAMIC ANALYSIS BY FEM[J];Journal of Mechanical Strength;2005-03
6 GUO ZhiQuan 1,2 XU YanShen 1 ZHANG XueLing 1 LIN HanYuan 3 (1. Key Laboratory for Advance Ceramics Processing and Machining Technology of Ministry of Education, Tianjin University, Tianjin 300072,China) (2.College of Mechanical Engineering Tianjin University of Science & Technology, Tianjin 300222,China) (3. Tianjin No.1 Machine Tool Works China, Tianjin 300180,China);RESEARCH ON STRUCTURE STATIC AND DYNAMIC DESIGN BASED ON FEA OF MACHINING CENTER COLUMNS[J];Journal of Mechanical Strength;2006-02
7 ZHANG Xian-dong1, XU Yan-shen1, LIN Han-yuan2(1. Key Laboratory for Advanced Ceramics processing and Machining Technology of Educational Ministry, Tianjin University, Tianjin 300072, China; 2. Tianjin The first Machine Tool Works, Tianjin 300180, China);Static and dynamic design on structural components of NC machine tools based on FEM[J];Journal of Machine Design;2005-05
8 ZHANG Hua, LI Yuwen, WANG Liping, TANG Xiaoqiang(Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China);Stiffness analysis of gantry hybrid machine tools[J];Journal of Tsinghua University(Science and Technology);2004-02
9 ;Finite Element Modeling and Analysis of Gantry-type 5-axis Machining Center Structure[J];Grinder and Grinding;2005-01
10 ZHANG Guang peng 1,2 , SHI Wen hao 2, HUANG Yu mei 2, HU De jin 1 (1. School of Mechannical Eng., Shanghai Jiaotong Univ., Shanghai 200030, China; 2. School of Mechanical and Instrument Eng., Xi'an Univ. of Technology, Xi'an 710048);Modeling and Analysis Method of Dynamical Characteristics for a Whole Machine Tool Structure[J];Journal of Shanghai Jiaotong University;2001-12
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved